Brazil's Studiolaser puts new flexographic plate into commercial production
en.Wedoany.com Reported - On November 12, Studiolaser, a flexographic prepress plate-making company in São Paulo State, Brazil, has put the new FLEXCEL Prime flexographic plate into commercial production, replacing the previously used FLEXCEL NXH plate. The technical conversion was supported by plate supplier Miraclon. The new plate was introduced into production while retaining the existing color configuration, dot gain curves and production process flow. The detackification time in the plate-making process has been shortened to approximately 5 minutes, and the plates have entered actual customer printing applications.

The production conversion involved plate imaging settings, process operating parameters and press trials. Miraclon technical engineers participated in imaging parameter verification and the first batch of printing tests. Studiolaser maintained its existing color management configuration and plate-making process during the conversion, and delivery of existing production orders was not affected.
After the new plate entered production, Studiolaser shortened the detackification time in the plate-making process to approximately 5 minutes, while also improving plate separation operations and reducing the time required for UV exposure. These changes have been applied to the actual plate-making process, shortening the processing cycle from exposure to subsequent delivery.
Initial feedback from printing customers obtained by Studiolaser shows that the new plate has improved ink accumulation during press operation, reduced the frequency of shutdowns for cleaning, improved ink transfer stability, and reduced the impression pressure required during printing. These results come from actual customer feedback, and no quantitative comparison data under uniform test conditions has been published.
In printing jobs where the new plate was used in combination with PureFlexo Printing technology, Studiolaser and its customers observed reduced ink spreading in solid patches and fine gradient patterns, and reduced dot gain. Trial jobs at higher printing speeds also achieved relatively stable image clarity. The company is currently continuing actual production verification with Miraclon and printing customers for various packaging printing applications, and will include narrow-web printing in subsequent testing.
Related Products

BEIREN B624A Web Offset Book and Magazine Printing Press
BEIREN INTELLIGENT EQUIPMENT TECHNOLOGY CO.,LTD.

Hongxing Steel Martensitic Stainless Steel Products
Gansu JISCO Group Hongxing Iron and Steel Co., Ltd.
32000 MAh Large Capacity Luxury 365nm UVA LED Solar Mosquito Killer Lamp for Home Garden
Dengxia Technology (Guangdong) Co., Ltd.









