Pirelli is the fifth largest operator in the world in the tyre sector, leader in the “Premium”, the high range segments with high technological content. Founded in 1872, today Pirelli counts 19 tyre industrial plants, i......Pirelli is the fifth largest operator in the world in the tyre sector, leader in the “Premium”, the high range segments with high technological content. Founded in 1872, today Pirelli counts 19 tyre industrial plants, in four continents, operating through a widespread sales network in over 160 countries around the world. Pirelli is distinguished for its long industrial tradition, which has always been combined with capacity for innovation, product quality and brand strength. A strength which, since 2002, has also been supported by the industrial design project of PZero, and which today has been further recognised by the Formula 1, for which Pirelli Tyre is the exclusive supplier for the three-year term 2011-2013. In line with its premium strategy and the ‘green performance, Pirelli, which has always focused on research and development, operates with constant and increasing attention to products and services of high quality and technology and low environmental impact. Activities in this direction are also pursued by Pirelli Eco Technology, dedicated to developing technologies to control pollutant emissions, and by Pirelli Ambiente, which operates in the renewable energy sector. Pirelli businesses are also supported by Pirelli Labs (100% Pirelli), a centre of technological excellence and engine of innovation. In pursuing its objectives, Pirelli is committed to combining economic profitability with social responsibility. In line with an industrial tradition dating back more than a century, Pirelli continues to invest in international expansion plans, always maintains strong roots in the local communities in which it operates.

PIUSI was established in 1953 as a pump manufacturer. Its aim has always been to offer solutions and not simply a product and this has stimulated research and design in specific fields such as: - fuel transfer and measure......PIUSI was established in 1953 as a pump manufacturer. Its aim has always been to offer solutions and not simply a product and this has stimulated research and design in specific fields such as: - fuel transfer and measurement (FUEL) - lubricant transfer and measurement (OIL) - pumps and compressors for agriculture (PTO) The company’s constant growth on all the international markets is the result of a few simple guidelines: - Dependable easy-to-use products - Innovative solutions combining high performance, long life and low cost - Attention to market demands and requirements - Streamlined efficient company organisation - Reliability in any relationship. Today, PIUSI has a 14.000 m2 new and modern industrial indoor facility, spread across a 30.000 m2 area. PIUSI uses a certified Quality System for control of its design and production processes, the latest production equipment, a well-stocked and efficient warehouse together with an advanced organisational system for managing all the company activities and, in particular, a team of trained qualified persons. PIUSI is therefore organised to offer high quality products in compliance with current regulations with complete control of the production process, efficient management of relations with the company and the services supplied, quick punctual deliveries and awareness of market requirements based on a profitable and friendly partnership with its customers. PIUSI is a company projected into the future and to the continuous improvement.

Pixsys designs and manufactures industrial automation systems, measure instruments and process controllers. The complete range of products is entirely engineered and realized within the company which takes care of prototy......Pixsys designs and manufactures industrial automation systems, measure instruments and process controllers. The complete range of products is entirely engineered and realized within the company which takes care of prototypes, PCB design, firmware development, assembling, calibration and test, packaging, technical literature. The technical staff is also at disposal to support customers with product training and projects planning. The search for customized solutions is supported by a flexible internal organization to achieve a reliable partnership with OEM customers and the sales network of distributors and systems integrators. Besides its own line of instruments, Pixsys proposes also a wide range of sensors and actuators to provide complete solutions for automation and control. The company operates with agents and authorized distributors on the domestic market and abroad.

Pizzato Elettrica company was established in the year 1984 at Marostica (VI) - Italy and is now one of the most important European companies manufacturing position switches, safety switches, foot switches, microswitches a......Pizzato Elettrica company was established in the year 1984 at Marostica (VI) - Italy and is now one of the most important European companies manufacturing position switches, safety switches, foot switches, microswitches and safety module. A dynamic company focused to the market development, since its beginning has experienced a constant growth, achieving a leading position in the Italian and European markets. Since all the products are designed and assembled inside, the company is able to satisfy any time the specific requirements of the customers offering a range of 6000 standard articles and more of 1000 special items. The production of the Pizzato Elettrica is developed in 4 plants with covered production area of more than 8000 m2, employing more than 120 people. The company owns many national and European patents and focuses on maintaining high quality standards for its products. Quality certified by the marks IMQ, UL, CSA standing in the most of its products. Pizzato Elettrica has earned the UNI EN ISO 9001:2000 certification, which guarantees the production-quality.

PMPO was founded in 1997 by Paride Pancaldi, thanks to his entrepreneurial skills and the technical knowledge, acquired in forty years of experience in the management of wire EDM cutting with wire guide systems, plunge ED......PMPO was founded in 1997 by Paride Pancaldi, thanks to his entrepreneurial skills and the technical knowledge, acquired in forty years of experience in the management of wire EDM cutting with wire guide systems, plunge EDM, turning, milling, fine blanking, die forging, gauging, and mold design. PMPO is based in the outskirts of Bologna, inside the industrial area of Calderara di Reno, a well-connected location thanks to the proximity of the highway, airport and railway. PMPO is specialized in the production of two different product lines: Rotary piston lobe type pumps Fluid filtration systems The quality management system is pursuant to the UNI EN ISO 9001 regulations. The continuous research for a technical and industrial development allowed the creation of innovative products that, besides giving excellent performances, also provide extra characteristics such as the compactness, reliability, quietness, eco-friendliness and working conditions improvement.

Pneumofore provides solutions for industrial vacuum and compressed air in applications around the world.Founded in 1923, Pneumofore has over 80 years experience in research and development, production expertise, and inter......Pneumofore provides solutions for industrial vacuum and compressed air in applications around the world.Founded in 1923, Pneumofore has over 80 years experience in research and development, production expertise, and international customer service. With a strong focus on the efficiency and high performance of its products, Pneumofore continues to set the standard for uncompromised quality in the field. A family-owned company, Pneumofores success spans three generations of engineers dedicated to one mission: to lead through constant improvement and innovation. The word "Pneumofore" comes from Ancient Greek and means "One who brings air". It also refers to a type of shellfish that can rise and sink by releasing air. Our logo represents the rotary vane principle arranged as a "P". It was created over 40 years ago.

Poggio has been working for around two decades in the branch of the enological and bottling machines and counts among its customers important home and foreign companies. The rotary rinsing machine and the equipments deriv......Poggio has been working for around two decades in the branch of the enological and bottling machines and counts among its customers important home and foreign companies. The rotary rinsing machine and the equipments deriving from it such as the blower and the inspection machine are the leading products of the company. Since 1996, the year when the machine with bottle overturning system though cam, the number of the machines manufactured by the company has constantly increased till reaching 250 items in 2002.The range of products of Poggio can meet a wide range of needs, from the small 5-gripper machine for low productions up to the 80-gripper machine suitable to work up to 40,000 bottles per hour, which is available both a fully-equipped machine, i.e. with safety guars, motorization, etc. and as a turret to be fitted on other machines such as rinsing-filling-corking triblocks manufactured by third parts. The company is located in Canelli, via dei Prati 32, in a recent building easy t reach both from the city center and the main roads.

Power System was founded in 1992 in Vicenza (Italy), the brainchild of four people, the present administrators, who had acquired twenty years of experience in leading European companies in the compressed air sector. Power......Power System was founded in 1992 in Vicenza (Italy), the brainchild of four people, the present administrators, who had acquired twenty years of experience in leading European companies in the compressed air sector. Power System‘s ambitious programme is to design, produce and propose on the market a wide range of compressors, able to satisfy any need for compressed air, even customised, from small to large powers.

Powertronix was originally born as an evolution of the dynamic company Iwatec Italia Srl, and has since developed into a fully-fledged designer and manufacturer. The current management has instilled the company with its v......Powertronix was originally born as an evolution of the dynamic company Iwatec Italia Srl, and has since developed into a fully-fledged designer and manufacturer. The current management has instilled the company with its vigour and skills, building up a business specialising in the conception, design and production of highly innovative Uninterruptible Power Supply units (UPS). Together with the Research and Development division, the companys Strategy department aims to present itself to this competitive market with cutting-edge products that can meet any needs and requests both in Italy and worldwide. Thanks to the managements operating strategies and the skills of its sales force, the company has entered markets around the world with its own brand and with manufacturing licences, and has constantly increased turnover during recent years. The Powertronix production process is structured to comply with the EN ISO 9001 quality certification process, providing the company with a set of standards and procedures that ensure optimum performance throughout its entire production line.

Powertronix was originally born as an evolution of the dynamic company Iwatec Italia Srl, and has since developed into a fully-fledged designer and manufacturer. The current management has instilled the company with its v......Powertronix was originally born as an evolution of the dynamic company Iwatec Italia Srl, and has since developed into a fully-fledged designer and manufacturer. The current management has instilled the company with its vigour and skills, building up a business specialising in the conception, design and production of highly innovative Uninterruptible Power Supply units (UPS). Together with the Research and Development division, the companys Strategy department aims to present itself to this competitive market with cutting-edge products that can meet any needs and requests both in Italy and worldwide. Thanks to the managements operating strategies and the skills of its sales force, the company has entered markets around the world with its own brand and with manufacturing licences, and has constantly increased turnover during recent years. The Powertronix production process is structured to comply with the EN ISO 9001 quality certification process, providing the company with a set of standards and procedures that ensure optimum performance throughout its entire production line.