What we do: BERTHOLD TECHNOLOGIES GmbH & Co KG is located in Bad Wildbad in the German Black Forest. In continuing a long and unequalled tradition of innovative and original contributions to the development of sensors, de......What we do: BERTHOLD TECHNOLOGIES GmbH & Co KG is located in Bad Wildbad in the German Black Forest. In continuing a long and unequalled tradition of innovative and original contributions to the development of sensors, detection systems and instruments dating back to 1949, we offer high performance standard products, optimal solutions for specific customer applications and OEM instruments for Biosciences, Medicine, Industrial Process Control and Radiation Protection. Under the “Detect and Identify” banner, the measurement instruments and systems made by BERTHOLD TECHNOLOGIES assist research scientists in bioanalytical and gene laboratories, serve in the control and quality assurance of industrial production plants and increase safety when handling radioactive sources or substances in research, medicine and nuclear technology. The original Berthold product line consisted mostly of sensors and detection systems for nuclear radiation and X-rays. However, by continuously following the requirements of our customers and with the progress of technology, the product lines were extended to measuring luminescent light and to the use of microwave radiation. Our experience and know-how in physics and in techniques of highly sensitive detection of light, nuclear radiation and microwave frequencies, together with the use of modern electronics and software, allows us to maintain our excellent and long reputation as a competent partner in solving diverse and difficult measurement problems and as a supplier of innovative and up-to-date instruments of the highest quality and reliability. We serve and support our customers with a worldwide distribution organization with emphasis on applications assistance and product maintenance. Who we are: Trustees of a long-term tradition The original company was founded in 1949 in Bad Wildbad by Prof. Dr. Rudolf Berthold and was named “Laboratorium Prof. Dr. Rudolf Berthold”. In 1960, his son, Dr Fritz Berthold took over the management of the company until 1989, when the company was acquired by the US EG&G Inc. corporation, later named PerkinElmer Inc. Eleven years later, (year 2000) the Berthold family, together with Hans J. Oberhofer, purchased the company from PerkinElmer Inc. The company is now named BERTHOLD TECHNOLOGIES GmbH & Co KG, with Hans J. Oberhofer as Managing Director and Dr. Fritz Berthold as Chairman of the Board. The company continues to be headquartered in Bad Wildbad with affiliated companies in Austria, Belgium, France, Great Britain, Italy, Switzerland and U.S.A. and the company is represented throughout the rest of the world by factory appointed distributors and representatives. Three business units The company is structured in three business units, namely Industrial Process Control, Bioanalytical Instruments and Radiation Protection Instrumentation. These units are aligned with the specific applications and users of the products but share common pools of technology and infrastructure. This arrangement allows the best possible customer and applications focus with the most effective collective contribution to the overall strength and productivity of the company.

What we do: BERTHOLD TECHNOLOGIES GmbH & Co KG is located in Bad Wildbad in the German Black Forest. In continuing a long and unequalled tradition of innovative and original contributions to the development of sensors, de......What we do: BERTHOLD TECHNOLOGIES GmbH & Co KG is located in Bad Wildbad in the German Black Forest. In continuing a long and unequalled tradition of innovative and original contributions to the development of sensors, detection systems and instruments dating back to 1949, we offer high performance standard products, optimal solutions for specific customer applications and OEM instruments for Biosciences, Medicine, Industrial Process Control and Radiation Protection. Under the “Detect and Identify” banner, the measurement instruments and systems made by BERTHOLD TECHNOLOGIES assist research scientists in bioanalytical and gene laboratories, serve in the control and quality assurance of industrial production plants and increase safety when handling radioactive sources or substances in research, medicine and nuclear technology. The original Berthold product line consisted mostly of sensors and detection systems for nuclear radiation and X-rays. However, by continuously following the requirements of our customers and with the progress of technology, the product lines were extended to measuring luminescent light and to the use of microwave radiation. Our experience and know-how in physics and in techniques of highly sensitive detection of light, nuclear radiation and microwave frequencies, together with the use of modern electronics and software, allows us to maintain our excellent and long reputation as a competent partner in solving diverse and difficult measurement problems and as a supplier of innovative and up-to-date instruments of the highest quality and reliability. We serve and support our customers with a worldwide distribution organization with emphasis on applications assistance and product maintenance. Who we are: Trustees of a long-term tradition The original company was founded in 1949 in Bad Wildbad by Prof. Dr. Rudolf Berthold and was named “Laboratorium Prof. Dr. Rudolf Berthold”. In 1960, his son, Dr Fritz Berthold took over the management of the company until 1989, when the company was acquired by the US EG&G Inc. corporation, later named PerkinElmer Inc. Eleven years later, (year 2000) the Berthold family, together with Hans J. Oberhofer, purchased the company from PerkinElmer Inc. The company is now named BERTHOLD TECHNOLOGIES GmbH & Co KG, with Hans J. Oberhofer as Managing Director and Dr. Fritz Berthold as Chairman of the Board. The company continues to be headquartered in Bad Wildbad with affiliated companies in Austria, Belgium, France, Great Britain, Italy, Switzerland and U.S.A. and the company is represented throughout the rest of the world by factory appointed distributors and representatives. Three business units The company is structured in three business units, namely Industrial Process Control, Bioanalytical Instruments and Radiation Protection Instrumentation. These units are aligned with the specific applications and users of the products but share common pools of technology and infrastructure. This arrangement allows the best possible customer and applications focus with the most effective collective contribution to the overall strength and productivity of the company.

Whatever your requirement in the area of large drives, whether it be for AC, DC or special machines, with the product and system spectrum from the business division LD, one of the world‘s leading suppliers in this market......Whatever your requirement in the area of large drives, whether it be for AC, DC or special machines, with the product and system spectrum from the business division LD, one of the world‘s leading suppliers in this market segment, your requirements are fully covered.

When Gerhard Knuth founded the business in 1923, he already knew then that long-lasting partnerships must be based on a combination of experience, innovation, quality, and local presence. It is this philosophy that made K......When Gerhard Knuth founded the business in 1923, he already knew then that long-lasting partnerships must be based on a combination of experience, innovation, quality, and local presence. It is this philosophy that made Knuth GmbH an internationally renowned supplier of machine tools. Our formula for success: • Experience - over 80 years of success and advancement • Innovation – guaranteed by capability and motivation • Partnership – exchange of knowledge is an invaluable asset • Worldwide Presence – cooperation at a local level as a key to success

When Hans-Joachim Schröder founded his company, CERTUSS WÄrmetechnik GmbH, in 1957, his primary goals were to manufacture reliable, low-noise steam generators, easy to maintain and for continuous operation. Thes......When Hans-Joachim Schröder founded his company, CERTUSS WÄrmetechnik GmbH, in 1957, his primary goals were to manufacture reliable, low-noise steam generators, easy to maintain and for continuous operation. These objectives formed the basis of a successful company, which is now operating world-wide. The concentration on a clearly defined product line, systematic research and development, and a highly trained team of professionals, enables series production of the highest standard, naturally with certified quality management according to DIN EN ISO 9001:2008.

When Hans-Joachim Schröder founded his company, CERTUSS Wärmetechnik GmbH, in 1957, his primary goals were to manufacture reliable, low-noise steam generators, easy to maintain and for continuous operation. Tradition......When Hans-Joachim Schröder founded his company, CERTUSS Wärmetechnik GmbH, in 1957, his primary goals were to manufacture reliable, low-noise steam generators, easy to maintain and for continuous operation. Tradition and progress These objectives formed the basis of a successful company, which is now operating world-wide. The concentration on a clearly defined product line, systematic research and development, and a highly trained team of professionals, enables series production of the highest standard, naturally with certified quality management according to DIN EN ISO 9001:2000.

When Hermann Schwelling founded his one-man company in 1971, he had two ideals written large: innovation and quality. These virtues, which have characterised HSM since it developed its first baling presses in 1972, are th......When Hermann Schwelling founded his one-man company in 1971, he had two ideals written large: innovation and quality. These virtues, which have characterised HSM since it developed its first baling presses in 1972, are the foundations for its success. Over the years, HSM has gradually grown and has become a company which is active around the world , but which still stays true to its German roots. On the following pages you can find information and facts about HSM, where we come from, who we are and where we want to go!

When I took over this company from my father in 1979, I had a vision: I wanted to turn BITZER into Europes leading manufacturer of refrigerant compressors, to achieve a strong global presence, to be at the forefront of t......When I took over this company from my father in 1979, I had a vision: I wanted to turn BITZER into Europes leading manufacturer of refrigerant compressors, to achieve a strong global presence, to be at the forefront of technology, to be independent, and to develop the company through controlled growth. Along with that, I took on the responsibility for the long-term security of my employees jobs. Today, when I look back over the last decades, I see that more than that has been achieved: BITZER is a global player, assures the best quality for refrigeration and air conditioning plants, and is noted for continuous innovation. I continue to put all my abilities at the service of the company, and rejoice every day in our worldwide success. I concentrate on the most important things, and get my energy from a love for contemporary art, which in many BITZER buildings is ubiquitous. Art has always inspired people – and perhaps thats also one of the reasons why BITZER is so successful. I give you all my thanks, and look towards the future with optimism.

When it comes to machine design and systems engineering, the words “Made in Germany” are powerful ones. They mean automation, precision, high performance, reliability and attention to detail. For about 60 years and with......When it comes to machine design and systems engineering, the words “Made in Germany” are powerful ones. They mean automation, precision, high performance, reliability and attention to detail. For about 60 years and with an export rate of more than 80 percent, bielomatik has been proud to contribute to this legacy of technology around the world. From banknotes to books, transponder labels to lubrication and from tickets to fuel tanks, our customers have experienced our willingness to help them in their drive to improve their enterprise.

When Richard Mönninghoff began in 1916 to manufacture machinery for the mining industry, he was already involved in drive equipment, which had to be designed to cope with the most extreme loads in mining operations. In th......When Richard Mönninghoff began in 1916 to manufacture machinery for the mining industry, he was already involved in drive equipment, which had to be designed to cope with the most extreme loads in mining operations. In the meantime the Mönninghoff machine factory has developed to become one of the leading companies specialising in high-precision clutches, sensitive overload systems and optimised shaft couplings and actuators which operate reliably in applications all over the world. Printing money, baking bread rolls, knitting pullovers, milling gear wheels, bottling beer, binding books, locking gates, filling cigarettes with tobacco, printing newspapers, weaving materials, labelling tubes, cutting foils, painting cars, tying sausages, sealing bags - for each sector of mechanical engineering we manufacture drive systems which are first and foremost aimed at solving our customers problem. Our company principles Our customers are at the heart of everything we do. We measure our success in terms of their progress and satisfaction all our efforts are geared towards the customer. Our success would not be possible without the flexibility and dedication of our employees. This is why we actively promote team spirit and the gaining of qualifications. We want to be a pioneer and set a recognisable standard in our markets. All our development work is spurred on by the desire to help our customers make technological advances. Our top-class quality and adherence to delivery deadlines makes us a reliable partner for our customers. Plus, we also invest in the very latest production facilities. Two of our ongoing company objectives are to act responsibly as regards the environment and to ensure the good health and welfare of our employees. Optimised work flows mean that we can avoid wasting resources. We cultivate close, long-term relationships with our global partners. It is only by working together with them that we are able to manufacture products of the highest technical standard. We stand by our tradition as a mechanical engineering company and are proud of our regional identity. For this family business, Germany will remain an important production site for many years to come. Economic success and growth are what safeguard our companys independence. We are improving efficiency and constantly innovating to further increase the profitability on which such success depends.