The German familiy owned manufacturer BvL have been making vertical mixer wagons since 1978, the first in Europe. A conscious effort to base their product line around the cow has lead tovery practical and strong solutions......The German familiy owned manufacturer BvL have been making vertical mixer wagons since 1978, the first in Europe. A conscious effort to base their product line around the cow has lead tovery practical and strong solutions, simplifying tasks around the farm whilst increasing both animal performance and profitability. The experience gathered in over 25 years producing mixer wagons has lead tp the current V-Mix product line. Proven in the field all over the world to chop and mix all feed stuffs, including round bales of straw, silage, or hay the V-Mix produces an accurate mixed, fluffy and palatable TMR. BvL was very quick to realise that barns or feed passages can vary greatly. Therefore BvL machines are tailormade to individual requirements. Not only in width and height but also in where the chopped and mixed fodder needs to be placed. On the floor In a trough Over a barrier Into a feed trailor Cannot drive straight through Big herd but small feed passage In order to manage differing situations BvL have developed over 1000 hopper and discharge solutions. This way a V-Mix meets induvidual requirements. It also means that customers only pay for what is needed: high quality, tailormade in Germany.

The GESgroup (Global Encoder Solutions Group) has 40 years of experience in the design, manufacture, sales and marketing of optical precision encoders. Since we specialize in the manufacture of high quality precision enco......The GESgroup (Global Encoder Solutions Group) has 40 years of experience in the design, manufacture, sales and marketing of optical precision encoders. Since we specialize in the manufacture of high quality precision encoders, we can offer the best solutions to meet your most demanding requirements. The GESgroup is committed to the success of our partners through our product, technology and our employees. We achieve this by maintaining a flexible manufacturing concept driven by experts who know and understand your requirements.The GESgroup offers it´s customers worldwide product support. It is the policy of the GESgroup to furnish our partners with the finest quality product and support conceivable. We have achieved this by utilizing the latest technological innovations, manufacturing concepts and by maintaining a continuous product development program. We will continue to grow by remaining responsive to the market and to our customers.Segmentation -"To operate in niche markets and deliver quality products." Simplification -"To deliver quality products with straightforward designs." Standardization -"To offer straightforward designs with standard components."

The Grammer brand stands for mobile comfort and safety. What drives us is a passion for creating quality for people who use vehicles. We therefore offer products worldwide that come closer and closer to fulfilling this co......The Grammer brand stands for mobile comfort and safety. What drives us is a passion for creating quality for people who use vehicles. We therefore offer products worldwide that come closer and closer to fulfilling this commitment through a process of constant innovation. As a partner to the vehicle manufacturing industry, we are specialized in innovatively developing and producing driver and passenger seats as well as components and systems for automobile interiors. Our Seating Systems division provides driver seats for trucks and offroad vehicles as well as passenger seats for trains, coaches and buses. Our Automotive division supplies premium head restraints, armrests, center consoles and integrated child booster seats to major motor vehicle manufacturers and tier 1 systems suppliers to the automotive industry. As a global corporate group, we operate with a strong focus on our customers, employees and shareholders, while gearing our activities to regional conditions in each case. Our corporate culture is based on the realization that lasting success depends on balancing all interests. In fiscal 2007, the Grammer Group’s sales were 998 million euros with a net profit for the year (EBIT) of 32.1 million euros. Grammer and its 23 fully consolidated companies, with a total workforce of nearly 9,500, are represented in 17 countries worldwide.

The Group of Companies which specializes in plastic packaging technology, consisting of KHS Corpoplast, KHS Plasmax, KHS Asbofill and KHS Moldtec, has been affiliated with the Klöckner-Werke AG, Duisburg, a subsidiary of ......The Group of Companies which specializes in plastic packaging technology, consisting of KHS Corpoplast, KHS Plasmax, KHS Asbofill and KHS Moldtec, has been affiliated with the Klöckner-Werke AG, Duisburg, a subsidiary of Salzgitter AG, Salzgitter since August 2008. The know-how of the companies perfectly complements the filling and packaging technology segment of the Klöckner Group. Together with the competencies of the KHS AG, which is also affiliated with the Klöckner-Werke AG, a complete portfolio in the strongly-growing filling and packaging technology market can now be provided - from the single machine through to a complete line. In this respect, the aforementioned companies can provide in particular technologies and expertise for the development, production, barrier coating and linear aseptic filling of plastic bottles. The entire chain of over 30 years of PET expertise, resulting in a complex value added offer: From products to be filled, material and design to preform layout, bottle and mold design, mold construction, laboratory tests and energy saving potentials, right down to industrial bottle production with the lowest possible weight on our InnoPET Blomax stretch blow molding machines.

The GSR Company Since 1971 GSR Ventiltechnik GmbH & Co. KG has been developing, manufacturing and distributing valves and fittings for nearly all applications. Our strength is the production of special valves according to......The GSR Company Since 1971 GSR Ventiltechnik GmbH & Co. KG has been developing, manufacturing and distributing valves and fittings for nearly all applications. Our strength is the production of special valves according to customers request. Together with our customers we develop system solutions and engineer them. Our core competence GSRs core competency is the fast development of special valve solutions meeting customers requirements in all fields of valve technology. Over 35 years, our engineers have developed more than 3000 special valves which can reliably be fitted in nearly all technologies under different conditions. Due to the fact that we produce all the core components on modern machines, we are able to fabricate custom-made items. However, we are also in a position to manufacture our regular series of valves to the highest quality, at short notice. All business is performed in accordance with DIN EN ISO 9001 which is continuously controlled and improved by our quality management.

The HAEHNE Elektronische Messgeraete GmbH was founded by Dipl.-Ing. Günter Hähne in 1977 as an engineering design office for measurement technologies. These roots have resulted in a special technical orientation of the co......The HAEHNE Elektronische Messgeraete GmbH was founded by Dipl.-Ing. Günter Hähne in 1977 as an engineering design office for measurement technologies. These roots have resulted in a special technical orientation of the company with a special emphasis on electronic force measurement. One core competence is the measurement and closed loop control of running webs made of plastic, paper textil, fabric, metal and multilayer materials. Sensors and electronic systems are all of our own proprietory design and mirrow the special requirements of our broad customer base. The product program is continuously enhanced to adapt to the changing technical environment. HAEHNE adopted the field bus technology already in 1991 and offered as the first company in web tension measurement technology fieldbus measuring amplifiers. Today literally hundreds of systems are installed worldwide with the majority in China. Besides the common quality assurance certification according to ISO 9001 and the CE markings of its products HAEHNE achieved European Community ATEX certification status for explosion proof sensors in January 2004. This difficult to achieve certification makes HAEHNE a leader in force measurement technology. A highly motivated team of employees equipped with modern hardware and software tools for R&D, manufacturing and quality assurance is the key to our success and the satisfaction of our worldwide customer base. Regularly trained representatives in all important industrial markets guarantee competent service for OEMs and final customers. Our favourable location close to Düsseldorf enhances our ability to serve our customers.

Acoustica® is a 100% Australian owned company engaged in research, development, manufacture, sale, export and licensing of leading technology sound control and abatement systems. From humble beginnings in 1985 when p......Acoustica® is a 100% Australian owned company engaged in research, development, manufacture, sale, export and licensing of leading technology sound control and abatement systems. From humble beginnings in 1985 when perforated steel was a major component in noise control applications, Acoustica® has been pioneer in developing cost effective sound control solutions. In 1991 Acoustica® was the first to introduce polyester sound and thermal insulating materials to Australia. This breakthrough with polyesters revolutionised the industry by overcoming health and recycling issues associated with the then existing products. Also in the 1990’s SANIP (Sydney Airport Noise Insulation Program), the body responsible for overseeing the Federal Government Noise Insulation Program, adopted Acoustica’s pilot program implementation as the specification for all dwellings included in the insulation program. In 2005 the NSW Government Minister, Diane Beamer, announced that Acoustica® had won the Excellence in Innovation Award for Outstanding Innovation for their new plasterboard wall system which, at half the thickness of conventional wall systems, delivered the best acoustic performance. Also in 2005 Acoustica® was accepted into the prestigious Australian Technology Showcase (ATS) for Revolutionary Technology for Acoustic Control. The ATS Showcase is sponsored by the Australian Federal and State Governments to promote innovative Australian technology worldwide. In 2006 the Australian Marine Industry Federation awarded Acoustica’s Vybar® Marine, a commendation award in the Innovative Product of the Year category. Acoustica® is recognised as a leader of innovative and cost effective solutions with their products being installed in the first satellite tele-conferencing centre in Australia. In 2007 Acoustica® was again a finalist in the Excellence in Innovation category of the 2007 Western Sydney Awards in recognition of their new fire coating and fire rated products which are not only 100% fireproof but also environmentally friendly requiring very little energy to produce and containing a small amount of embodied energy. The Western Sydney award was followed up by the nomination of Acoustica® as one of the ten finalists for the 2007 NSW Pitchfest for their QuietWave revolutionary acoustic wall system and their Vulcanite® low cost fire resistant ceramic for use as a fire and water resistant building product. In September 2007, 18 finalists from six categories were selected from over 650 nominations gathered at the Melbourne headquarters of the Primary Sponsor, Price Waterhouse Coopers, for the second annual Cool Company Awards. These awards publicly acknowledge and celebrate Australian organisations that are doing things differently or defying convention to bring about positive change.

Adcon Telemetry Gmbh was established in October 2003. Its Headquarters are located in Klosterneuburg near Vienna, the capital of Austria. This is where the R&D Team of Adcon designs and develops digital radios for data tr......Adcon Telemetry Gmbh was established in October 2003. Its Headquarters are located in Klosterneuburg near Vienna, the capital of Austria. This is where the R&D Team of Adcon designs and develops digital radios for data transfer, based on UHF and GSM/GPRS technology. In 2005 Adcon International Inc. in Davis, California, was set up, converting the former support office into a legal entity to better serve the needs of our US, Canadian and Latin American customers. Apart from that we have a sales office in Paris, France, and in Mantova, Italy. In April of 2006 a new office was opened in Australia. Adcon Telemetry focuses on telemetry solutions, based on its own ultra low-power radio technology and GSM/GPRS modems, both being integrated into our own range of loggers. What makes the Adcon solution unique is a range of unrivaled product features: - unsurpassed user friendliness of its whole product line - extremely low power consumption, using the smallest solar panels in the industry. - extremely high receiver sensitivity, resulting in very high transmission distances, - the networking capability of each long-range station, which can at the same time function as relay for others, - the integration of all of these devices into one Telemetry Gateway, that can manage all of them, - a powerful SCADA software, collecting, distributing, storing, processing and visualizing all of this data. With all these features in place Adcon has gained a very strong position in many countries, being the market leader particularly in agricultural applications. We are proud to say that we operate a highly profitable company, which managed to show profit already in its first year, has significantly increased both turnover and profit in 2005, and continues to grow at a steady pace.

AEV has evolved from a small amusement ride manufacturing business in 1983 to a company that manufactures high quality specialised equipment for industry and businesses. The business grew rapidly due to the success of the......AEV has evolved from a small amusement ride manufacturing business in 1983 to a company that manufactures high quality specialised equipment for industry and businesses. The business grew rapidly due to the success of the amusement ride manufacture, and then turned to commercial electric vehicles and adapted some of the amusement technology to its electric vehicles – hence the present name of Australian Electric Vehicles. From this point forward, the company quickly became involved in some big projects, for example it supplied 5 trains to World Expo 88 for people moving and on-site litter removal. An association with Warner Bros Movie World was then established and the company went on to build many rides and street parade vehicles for both the WBMW Gold Coast QLD and WBMW Düsseldorf Germany venues. Soon after this, AEV started manufacturing Dark Rides and motion theatres for several venues in China. In the mid 1990s the company became involved in the manufacture of the HILITE portable lighting towers, which have since been used extensively throughout Australia and in Indonesia. The HILITE range is now recognized as one of the largest manufacturers of portable light towers in Australia. A more recent development is the HILITE Variable Message Board, which is proving highly successful and a leader in its field. The message boards and light towers were both used in significant numbers at the 2000 Sydney Olympics. The company has conducted many successful export ventures into countries such as the UK, Germany, New Zealand, China, Indonesia, Malaysia, and Singapore. With high profile customers such as Coates Hire in Australia and Indonesia, Atlas Copco Hire, Theiss Contractors, Premier Hire, Warner Bros Movieworld in Australia and Germany, Muchpower China, Tony Quirk Amusements [Darling Harbour and Stadium Australia], G & H Walkom [Botanical Gardens, Sydney], Toboggan Hill Park [Nelson Bay, NSW], Fantasy Glades [Port Macquarie, NSW], Driveworld [Pacific Fair, Qld], Sydney Olympic Park Authority [Homebush Bay, NSW] and many more are a statement to the company’s success. AEV is presently developing some exciting new products to add to its impressive list of achievements. A commitment in areas of innovative design, engineering excellence and affordability will continue successfully as it has done in the past All products come with a twelve months warranty on new products. We offer new product advice for the client’s need. Our after sales service offers technical advice when required and spare parts backup is second to none.

Altium (known as Protel before 2001) is a listed technology company (ASX:ALU). Our vision remains this: To break down the barriers to innovation and technological advancement by providing the best possible design tools to......Altium (known as Protel before 2001) is a listed technology company (ASX:ALU). Our vision remains this: To break down the barriers to innovation and technological advancement by providing the best possible design tools to the widest possible audience of electronics designers. Although this has remained constant over the years, the implementation has evolved, driven by new developments in electronics and computer technology. In 1985, when we introduced our first product, we were one of the first to harness the newly arrived IBM-compatible personal computers for electronics design tasks. In 1991, before Microsoft Windows became the standard PC operating system, we released the worlds first Windows-based printed circuit board (PCB) design software. In 1998 we introduced Protel-98, the first software package to handle all core electronics design tasks in a single integrated application. In 2005 we introduced Altium Designer which redefined electronics design tools. In addition to supporting the design of printed circuit boards, the core of electronics systems, it also included integrated design tools for the rapidly emerging programmable hardware in electronics systems. This culminated in the worlds first unified electronics design solution. Since then, we have introduced a number of world-first innovations. These include the first "plug-n-play" vendor-independent reconfigurable development board, and the first 3D electronics design features to dynamically link electronics designs to mechanical designs. As the technology of programmable devices has developed, we have created new approaches to allow electronics designers to harness these capabilities using their existing design skills. We continue to focus on helping designers and their organizations lift their capabilities and adopt a much more holistic approach to design by: Unifying the design of electronic systems with both the aesthetic and mechanical aspects of their products Plugging the electronics design process into the world of procurement and manufacturing Adding intelligence to their devices so that they can program rather than manufacture features into their products And, once their devices become intelligent, to use them as enablers for establishing a real-time relationship between their organization and their customers. Through all of this we continue to provide our technology to as many of todays electronics designers as possible and seek to enable a new generation to emerge as the electronics designers of tomorrow. As a business, we generate the majority of our revenues by selling licenses of our electronics design tools. Today, Altium has over 20,000 users on our latest generation design solution supported by approximately 300 employees worldwide. Our operations are headquartered in Sydney, Australia, with direct sales and support offices in Australia, China, Germany, and the United States. Altium is supported by a large reseller representative network in all other major markets. Customer snapshot Altiums solutions are used daily across a wide range of industries including telecommunications, automotive, aerospace, defense, medicine, science, and consumer electronics. Our customers range from individual designers and small to medium enterprises to larger organizations such as 3M, Bang & Olufsen, Boeing, British Aerospace, Cambridge Silicon Radio, Cessna, Cochlear, Fujitsu, GE, General Dynamics, Honeywell, HP, Hughes Electronics, IBM, Infineon, Intel, L-3 Communications, Linn, Lockheed Martin, Marshall, Microsoft, Motorola, NASA, National Semiconductor, Naval Research Laboratory, NEC, Northrop Grumman, Pelco, Philips, Raytheon, ResMed, Robert Bosch, Schlumberger, Siemens, Sony, Texas Instruments, Thales