1000kW Fixed Fuel Cell Power Station

Negotiable
China
No. 1555 Jingyuan Road, Jiading District, Shanghai City 201800
Online Contact
Favorite
Product Introduction

This series of power stations was independently designed, developed, and produced by REFIRE throughout the entire process; rated power 1000kW, peak power up to 1100kW, power generation efficiency and output voltage platform can be customized according to scenarios, supporting combined heat and power; modular architecture supports multi-station parallel operation; adopts skid-mounted structure and containerized layout for rapid deployment and flexible relocation; equipped with a comprehensive safety system, supporting black start, remote monitoring, and unmanned operation. Supports seamless switching between grid-connected/off-grid dual modes, widely adaptable to full-scenario energy needs such as hydrogen energy storage peak shaving, industrial energy hubs, data center backup power, commercial complexes, smart communities, and off-grid isolated islands, redefining the application boundaries of distributed energy.

Product Features

  • Ultra-Environmentally Friendly: Zero emissions, low noise

  • High Safety: Comprehensive systematic safety design, including intrinsic safety design for fire prevention, waterproofing, electric shock protection, electromagnetic compatibility, explosion protection, hydrogen safety, structural safety, functional safety, and full lifecycle safety management regulations

  • High Return: Customizable power generation efficiency, capable of combined heat, power, and water supply

  • High Reliability: Three-level verification system, power redundancy design, modular isolation design, uninterruptible power supply

  • Long Lifespan: Self-developed fuel cell system, supports 7*24h operation, lifespan over 40,000 hours

  • Intelligent: Flexible switching between multiple operation modes, automatic warning and protection, remote monitoring and unmanned operation

  • High Integration: Skid-mounted design, rapid deployment, flexible relocation

  • High Adaptability: Supports multi-station parallel operation, can operate in parallel with traditional fuel/gas generator sets or electrochemical energy storage

  • Fast Response: Second-level dynamic response, seamless grid-connected/off-grid switching

  • High Adaptability: -30°C low-temperature lossless rapid start, high-altitude self-adaptation

Product Parameters

Mechanical Parameters

Integration Form

Integrated: A Container / B Container Integration

(A Container: Power Generation Container, B Container: Electrical Container)

Installation Method

Containerized

Overall Dimensions

≤12500(L)×3000(W)×3000(H) mm

Weight

≤26000 kg

DC Side Parameters

Maximum DC Output Power

1320 kW (Backup Version) / 1800 kW (Primary Version)

(Primary Version: Long-term Power Generation, Backup Version: Short-term Power Generation, Power Adjustable)

DC Bus Voltage Range

450~750 VDC

AC Side Parameters

Rated Output Power

1000 kW

Maximum Output Power

1100 kW

Voltage System

Three-phase Three-wire / Three-phase Four-wire

Rated Output Voltage

AC10 kV / 380 V (Customizable)

Power Generation Efficiency at Rated Power Point

13.0~16.0 kWh/kg (Customizable)

Operating Mode

Grid-connected / Off-grid

Cooling Parameters

Cooling Solution

Air-cooled / Water-cooled

Combined Heat and Power (CHP)

Configurable

CHP Hot Water Temperature

≤75℃

Overall CHP Efficiency

≥80%

External Hydrogen Supply Parameters

Hydrogen Supply Pressure Range

≥1.5 Mpag

Hydrogen Supply Quality Requirement

≥99.97%, GB / T 37244

Unit Parameters

Continuous Ramp-up/Ramp-down Rate

(Fuel Cell System Response Only)

60 / 60 kW/s

Instantaneous Ramp-up/Ramp-down Rate

(Power Battery Support)

500 / 500 kW/s

Normal Temperature Startup/Shutdown Time

(Startup~Rated, Rated~Shutdown, ≥10℃)

≤60 / ≤60 s

Low Temperature Startup/Shutdown Time

(Startup~Rated, Rated~Shutdown, ≥-30℃)

≤5 / ≤10 min

Ambient Temperature Range

-30 ~ 45℃

Ambient Altitude Range

≤3000 m

Design Life

≥40000 h

Black Start Capability

Supported

Communication Interface

Ethernet / RS485 / CAN2.0B

Design Standard

GB / T 27748