Strong wind protection can realize safe parking at nearly 0 degrees. The wind speed can reach 22 m/s. The six-dimensional square main beam is designed with better bending and torsion resistance. The patented design of the exclusive two-way transmission driver is more adaptable to irregular terrain. The same more installed capacity under the terrain Adapt to the optimal cleaning angle of the robot Effectively improve the operation and maintenance efficiency of the power station Better cost budget Higher power generation efficiency
Tianshuang Flat Single Axis Tracking System
|
Tracking form |
Linkage flat single-axis tracking system |
|
Tracking angle range |
± 60 ° |
|
Drive device |
Worm gear, multi-point parallel drive |
|
Number of single tracking system components |
Up to 168 |
|
System voltage |
300VDC-1500 VDC |
|
Pile Foundation form |
Hammered pile/cast-in-place pile/cement foundation |
|
Structural Materials |
Hot-dip galvanized/pre-galvanized/magnesium-aluminum-zinc plated steel |
|
Power supply mode |
Series self-powered, lithium battery backup |
|
Daily system power consumption |
Approximately 0.04kWh/day |
|
Wind-resistant design |
Maximum design wind speed up to 70 m/s |
|
Component Type |
Compatible with all components |
|
Working environment temperature |
-30 ℃ to 60 ℃ |
|
Control algorithm |
Astronomical algorithm + position sensor closed-loop control |
|
Tracking Accuracy |
≤ 2 ° |
|
Inverse tracking |
Support terrain adaptation intelligent algorithm |
|
Communication Design |
LoRa wireless communication or RS485 Wired |
|
Other special modes |
Heavy Snow Mode \Hail Mode \Flood Mode |
|
Controller power supply |
The default string power supply, use AC power or self-powered according to requirements |
|
Flood mode |
Leveling Tracker (Optional) |
|
Heavy Snow Mode |
Tracker maximum tilt angle (optional) |
|
Gale protection mode |
Small angle Windward stop |
