High/low voltage soft starter device-CMC-LX low voltage motor soft starter price_Manufacturer_How much

1/1

High/low voltage soft starter device-CMC-LX low voltage motor soft starter

Negotiable

Xi‘an Simo Motor Co., Ltd.

Located Region:

China

Address:

No. 159 Mingguang Road, Xi’an Economic and Technological Development Zone, Shaanxi Province

Biz Consulting:

+86 029-86171114

E-mail:

js2@simo.com.cn

Online Contact

Favorite

The CMC-LX series motor soft starter is a new type of motor starting and protection device that combines power electronics technology, microprocessors, and automatic control. It allows for smooth, step-less starting and stopping of motors, avoiding mechanical and electrical shocks caused by traditional starting methods such as direct-on-line, ∆/Y starting, and autotransformer starting. It effectively reduces starting current and distribution capacity, helping to avoid the need for capacity expansion investments. Additionally, the CMC-LX series soft starter integrates a current transformer, eliminating the need for external connections.

Suitable power range: 7.5-530 kW.

Conditions of use
Control power supply	External type	AC110~220V±15%,50/60Hz, Pmax=30W
	Built-in type	Internal integrated control power supply, no external
Three-phase power supply	Standard wiring AC380V ± 15%, inner triangular wiring AC380V ± 15%
Nominal current	18 ~ 1000A, 22 rated values in total
Applicable motor	General squirrel-cage AC asynchronous motor
Starting ramp mode	Voltage ramp start, current ramp start
Parking mode	Free parking, soft parking
Logic input	Impedance 1.8 kΩ, power supply +24V
Starting frequency	It can be started frequently or infrequently. It is recommended to start s10 times per hour.
Protection function	Phase loss, overcurrent, short circuit, SCR protection, overheating, phase current imbalance
Protection level	IP00,IP20
Cooling mode	Natural cooling or forced air cooling
Installation method	Wall-mounted
Communication mode	Rs485 (optional)
Environmental conditions	More than 2000 meters above sea level, should reduce the corresponding capacity to use; The early ambient temperature is -25 ~ +45 ℃; The corresponding temperature shall not exceed 95%(20±5 ℃); No flammable, explosive, corrosive gas, no conductive dust; Indoor installation, good ventilation, vibration less than 0.5G.