Explosion-proof junction box PTBS-GET-120 series price_Manufacturer_How much

1/1

Explosion-proof junction box PTBS-GET-120 series

Negotiable

Wuhu Jiahong New Material Co., Ltd.

Located Region:

China

Address:

No. 86, Guandoumen Road, Jiujiang Economic Development Zone, Wuhu Area, Pilot Free Trade Zone of China (Anhui)

Biz Consulting:

+86 5535315646

E-mail:

xiongshili@ahjiahong.com

Online Contact

Favorite

①PTBS-GET-120 series explosion-proof junction boxes are used to connect the power supply end with Protrace self-limiting temperature heating cable products HTLe, HTR, HTP, HTS. This series of junction boxes are certified for use in designated explosion-proof hazardous areas.

②PTBS-GET-120 series explosion-proof junction boxes have a support base that can be fixed to the pipe through a stainless steel hose clamp and a lock. At the same time, the sturdy and durable bracket can protect no more than 3 heating cables from entering the junction box from the bottom of the bracket and accessing the terminal block through the connection kit.

③PTBS-GET-120 series explosion-proof junction boxes can be used for pipes with an insulation thickness of no more than 80mm when using the table S1 type base; when using the S2 type base, it can be used for pipes with an insulation thickness of no more than 100mm.

Model: PTBS-GET-120 series

Description: See design document

Composition: 1 junction box with terminals, 1 support base

Product Certification:

Size: body size 122*120*90 (mm), excluding support base

Applicable heat tracing line: HTLe, HTR, HTP, HTS, FCW

Protection class: IP66

Power inlet hole: 1-M25x1.5 Glan

Ambient temperature range:-60 ℃ ~ +60 ℃

Minimum installation temperature:-60 ℃

Maximum pipe temperature: see tracing line specification description

Maximum wire size: see design document

Rated voltage: 110 ~ 277Vac,380Vac/660Vac 50Hz

Maximum continuous current: see design documents

Shell, cover and bracket: polyester material

Cover screw: Stainless steel

Product specifications: See the table below

Product Model	Product Name	Product Description	Applicable line type
PTBS-GET-120(4mm ²)	PTBS explosion-proof junction box	Polyester shell: 120mm (width) x122mm (height) x90mm (depth) 1-PTBS junction box 120 specification shell, with 1-M40x1.5 holes at the bottom and 1-M25x1.5 holes on the left and right sides 1-PTBS-GET-S1 bracket 1-M25x1.5 inlet explosion-proof Gland (round mouth, PA66 material) 1-M25x1.5 explosion-proof blind plug (PA66 material) 4-UK5N or same specification terminal 2-USLKG5 or same specification ground terminal	HTLe, HTR, HTP, HTS, FCW
PTBS-GET-120(6mm ²)	PTBS explosion-proof junction box	Polyester shell: 120mm (width) x122mm (height) x90mm (depth) 1-PTBS junction box 120 specification shell, with 1-M40x1.5 holes at the bottom and 1-M25x1.5 holes on the left and right sides 1-PTBS-GET-S1 bracket 1-M25x1.5 inlet explosion-proof Gland (round mouth, PA66 material) 1-M25x1.5 explosion-proof blind plug (PA66 material) 4-UK6N or same specification terminal 2-USLKG6 or grounding terminal of the same specification	HTLe, HTR, HTP, HTS, FCW
PTBS-GET-2	PTBS explosion-proof junction box	Polyester shell: 120mm (width) x122mm (height) x90mm (depth) 1-PTBS junction box 120 specification shell, 1-M40x1.5 hole at the bottom 1-M25x1.5 holes on left and right sides 1-PTBS-GET-S1 bracket 1-M25x1.5 explosion-proof blind plug (PA66 material) 4-UK6N or same specification terminal 2-USLKG6 or grounding terminal of the same specification 1-Wiring kit (including threading shoe * 2 + yellow-green Heat Shrinkable tube * 2)	HTLe, HTR, HTP, HTS, FCW
PTBS-GET-120H(4mm ²)	PTBS explosion-proof junction box	Polyester shell: 120mm (width) x122mm (height) x90mm (depth) 1-PTBS junction box 120 specification shell, 1-M40x1.5 hole at the bottom 1-M25x1.5 holes on left and right sides 1-PTBS-GET-S2 bracket 1-M25x1.5 inlet explosion-proof Gland (round mouth, PA66 material) 1-M25x1.5 explosion-proof blind plug (PA66 material) 4-UK5N or same specification terminal 2-USLKG5 or same specification ground terminal	HTLe, HTR, HTP, HTS, FCW
PTBS-GET-120H(6mm ²)	PTBS explosion-proof junction box	Polyester shell: 120mm (width) x122mm (height) x90mm (depth) 1-PTBS junction box 120 specification shell, 1-M40x1.5 hole at the bottom 1-M25x1.5 holes on left and right sides 1-PTBS-GET-S2 bracket 1-M25x1.5 inlet explosion-proof Gland (round mouth, PA66 material) 1-M25x1.5 explosion-proof blind plug (PA66 material) 4-UK6N or same specification terminal 2-USLKG6 or grounding terminal of the same specification	HTLe, HTR, HTP, HTS, FCW
PTBS-GET-S1	PTBS explosion-proof junction box support base	Standard base	-
PTBS-GET-S2	PTBS explosion-proof junction box support base	Elevate base	-