The throat clamps and snap locks are composed of stainless steel strips and adjusting screws. They are used to fix accessories such as explosion-proof power junction boxes on the pipeline. The steel strip can be cut to 1.1 times the actual fixed length according to the pipe diameter. Then fix the front and rear ends of the adjusting screws in the small holes at both ends and tighten the adjusting screws.
1/1
Hose clamps and snap locks
Negotiable
China
No. 86, Guandoumen Road, Jiujiang Economic Development Zone, Wuhu Area, Pilot Free Trade Zone of China (Anhui)
+86 5535315646
xiongshili@ahjiahong.com
Product Introduction
Product Parameters
|
Model |
Name |
Specifications |
|
PET-SST/ B |
Stainless steel hose clamp |
304 stainless steel, 10mm wide, 10m/Roll |
|
PET-SST/B1 |
Stainless steel snap lock |
Use of snap lock with hose clamp |
|
PET-SST-01 |
Stainless Steel Hose Clamp Kit |
Applicable to pipes up to 1 ", including hose clamp and snap lock |
|
PET-SST-02 |
Stainless Steel Hose Clamp Kit |
Applicable to 1 "-2" pipe with hose clamp and snap lock |
|
PET-SST-10 |
Stainless Steel Hose Clamp Kit |
Applicable to 3 "-10" pipe, including hose clamp and snap lock |
|
PET-SST-20 |
Stainless Steel Hose Clamp Kit |
Suitable for pipes above 10 ", including hose clamp and snap lock |
Other products from this supplier
Negotiable
Explosion-proof junction box PTBS-GET-120 series
Negotiable
Insulation bushing
Negotiable
Aluminum Foil Tape
Negotiable
Fiberglass tape
Negotiable
PT100 Temperature Sensor
Negotiable
Installing the Panel Bracket Kit
Negotiable
Cold Termination Kit
Negotiable
Heat Shrink Termination Kits
Negotiable
High current connector PET-HD series
Negotiable
Explosion-proof terminal junction box JHE-GET
Negotiable
Explosion-proof three-way junction box JHT-GET
Negotiable
