Shinsung E&G of South Korea Launches 650 W Bifacial PV Modules

2026-11-16 15:17
Favorite

en.Wedoany.com Reported - On November 11, South Korean PV equipment manufacturer Shinsung E&G announced a showcase plan for its 650 W high-power PV modules, with the new products to be displayed from November 15 to 20 at the 9th World Conference on Photovoltaic Energy Conversion in Daejeon, South Korea. The modules feature n-type tunnel oxide passivated contact (TOPCon) cell technology and cover ground-mounted power plants, floating solar, and agrivoltaic applications, with a maximum front-side output of 650 W and a maximum conversion efficiency of 23.25% under standard test conditions.

The new products comprise two series, SS-JM-TK and SS-JM-TN, targeting ground-mounted PV plants and floating solar and agrivoltaic projects, respectively. Both series offer three power ratings of 640 W, 645 W, and 650 W, use 156 bifacial monocrystalline silicon cells, and achieve module conversion efficiencies of 22.89% to 23.25% under standard test conditions.

The ground-mounted modules measure 2465 mm × 1134 mm × 30 mm and weigh 33.5 kg. The SS-JM650TK model has a rated power of 650 W, a conversion efficiency of 23.25%, an open-circuit voltage of 55.71 V, and a short-circuit current of 14.52 A. Under bifacial nominal power irradiation conditions, the series delivers 700 to 710 W, with a maximum bifacial equivalent efficiency of 25.40%.

The floating solar and agrivoltaic series uses a 35 mm thick frame, with module length, width, and weight identical to the ground-mounted series. The series has a maximum front-side rated output of 650 W and, under bifacial nominal power irradiation conditions, delivers 705 to 717 W, with a maximum bifacial equivalent efficiency of 25.65%.

Both series use bifacial 2.0 mm heat-strengthened glass, anodized aluminum alloy frames, and IP68-rated junction boxes with three bypass diodes, with a maximum system voltage of 1500 V and a design operating temperature range of minus 40°C to 85°C. The ground-mounted series has front and rear mechanical test loads of 5400 Pa and 2400 Pa, respectively, while the floating and agrivoltaic series has a bifacial mechanical test load of 5400 Pa.

Shinsung E&G offers both series a 12-year product warranty and a 30-year performance warranty, guaranteeing that module output will be no less than 99% of the initial value after the first year and no less than 87.4% after 30 years, with a maximum annual power degradation rate of 0.4% thereafter. The two modules are planned to be produced at the company's Gimje production base in North Jeolla Province, South Korea. The base commissioned a 350 MW module production line in August 2026, raising the plant's total capacity to 600 MW.

This bulletin is compiled and reposted from information of global Internet and strategic partners, aiming to provide communication for readers. If there is any infringement or other issues, please inform us in time. We will make modifications or deletions accordingly. Unauthorized reproduction of this article is strictly prohibited. Email: news@wedoany.com