NAED of the United States Launches a Production Line Solution for 96,000 Tandem Cells per Hour
en.Wedoany.com Reported - On November 11, NAED, a photovoltaic equipment development company based in Miami, Florida, USA, launched the PV-1 PECVD-V vertical deposition platform, targeting large-scale manufacturing of perovskite and heterojunction crystalline silicon tandem solar cells. The platform integrates plasma-enhanced chemical vapor deposition and physical vapor deposition processes. The combined design throughput of six production lines reaches 96,000 G12 half-cut wafers per hour, double the company's previously announced platform solution of 48,000 wafers per hour.

The new platform adopts a vertical transport and shared carrier design. Wafers remain upright during the deposition process, and double-sided processing is completed by lifting and rotating the carrier as a whole by 180 degrees, eliminating the need to flip wafers individually. The plasma-enhanced chemical vapor deposition and physical vapor deposition equipment use a continuous transport structure, reducing individual handling of wafers between different deposition steps.
On November 12, NAED further disclosed the production line design parameters. A single PV-1 production line has a rated throughput of 16,000 G12 half-cut wafers per hour, corresponding to 400 wafers every 90 seconds. The ITO-1 physical vapor deposition equipment configured on the production line determines the overall operating cycle. The design cycle of the four plasma-enhanced chemical vapor deposition modules is 76 seconds, with a theoretical throughput of approximately 18,950 wafers per hour.
Based on planning conditions of 85% equipment availability, 97.5% yield, and 30% cell conversion efficiency, a single production line can produce approximately 116 million qualified cells per year, equivalent to approximately 0.77 GW of cell capacity. The combined annual qualified cell output of six production lines is expected to be approximately 697 million cells, equivalent to approximately 4.6 GW of annual capacity. The above figures are design capabilities and planning estimates, and are not yet actual mass-production results.
The PV-1 platform is intended for the company's T2X two-terminal perovskite and heterojunction tandem cell manufacturing, with a planned cell conversion efficiency target of 30%. The company has also established a cell model with 34.4% conversion efficiency, corresponding to an open-circuit voltage of 1.969 V, a short-circuit current density of 20.18 mA/cm², and a fill factor of 0.867. The relevant efficiency values are design targets and model calculation results, and have not yet been published as actual cell test results.
The complete PV-1 line is planned to be equipped with 13 sets of process equipment, of which 6 sets have been manufactured and the remaining 7 sets are in production. The engineering design of the complete line and supporting production facilities has been completed, and the company has opened equipment production slot reservations to photovoltaic cell manufacturers in the United States and internationally. U.S. patent applications relating to the platform, the carrier rotation mechanism, the wafer holding carrier, and the T2X tandem cell are still under examination.
Related Products

TAI Slew-drive Single-axis Independent 1P Tracking Bracket System
ANTAI TECHNOLOGY CO., LTD.
220kV Composite Outdoor Cable Terminal
Shenyang Guolian Cable Accessories Manufacture Co., Ltd.
MESS8201-2507/5015-BN Prefabricated Liquid-cooled Energy Storage Battery Container
Xuchang Xuji Electric Science Energy Storage Technology Co., Ltd.

VEG-12/24/40.5 Series Vacuum Circuit Breaker
SHANGHAI PINGGAO TIANLING SWITCHGEAR CO., LTD.
KYN61-40.5 Indoor AC Metal-clad Removable Switchgear
Chongqing Transformer Co., Ltd.
KYN28 - High Voltage Switchgear
Anhui Tianying Electrical Equipment Manufacturing Co., Ltd.




Double-slide Triple-sealed Hot Air Isolation Door
Xi'an Yingchuan Electric Power Equipment Co., Ltd.








