Euroma: Leader in Automation For the last thirty years Euroma has been a leader in the Italian market for the production of operating units and rotary tables. Due to the fact that Euroma has grown one of the the most pres......Euroma: Leader in Automation For the last thirty years Euroma has been a leader in the Italian market for the production of operating units and rotary tables. Due to the fact that Euroma has grown one of the the most prestigious automotive areas in the world, it has become one of the main points of reference for industrial automation sector. Experience and flexibility, achieved through the continued pursuit of technological development allows for great innovation as well as the ability for customized solutions. Euroma is able to tailor make its products to fit the customers exact needs while maintaining our high standard of quality and competitive costs even against the new and emerging market. Euroma: Technology and Sustainability Technology and sustainable development are Euromas objectives. We believe in the importance of preserving our environment. Our dream is to balance innovation with environmental awareness, and we work to achieve this goal every day. We would like to create a company that is energy efficient, creates technical solutions for high performance with a low environmental impact, as well as providing quality products at competitive prices. We aim to be an environmentally friendly company in both the industrial production but also in our daily operations. Our new challenge will be to find a renewable energy supply so that the success of our company comes along with the improvement of the environment. Euroma: Customer Satisfaction All of our production choices depend primarily on our main objective: Customer Satisfaction. To maximize our efficiency and flexibility, designing, purchasing and supply of raw material, production and assembly of components, marketing and post-sales assistance, creation and distribution of products, we handle everything internally so that we can improve knowledge management and workflow. This has allowed for innovation and technological development. We are able to guarantee quality control since we design, construct, and assemble all the components directly in our facilities. We carefully double check our products during each phase of production. The continuous investment in our equipment and our assembly line have guaranteed the growth of productivity and allow us to maintain a high standard of quality.

EUROTRON INSTRUMENTS, EXCELLENCE IN MEASUREMENTS Specialization, constant investment in research and cutting-edge technology, and quality, which dominates every aspect of the company from internal organization to customer......EUROTRON INSTRUMENTS, EXCELLENCE IN MEASUREMENTS Specialization, constant investment in research and cutting-edge technology, and quality, which dominates every aspect of the company from internal organization to customer service: these are the principles which underlie and guide Eurotrons activity. The company was founded in 1980 and quickly became successful in three particularly exacting areas aimed at a highly demanding market: calibrators, infrared thermometers and combustion gas analysers. Eurotrons administrative and operating headquarters are located in Sesto S. Giovanni, just outside Milan (Italy). The company’s structure is designed to dynamize its businnes, with constantly investiment high-level technical and scentific know-how, recognized on international level. The story of Eurotron is marked both by technological and commercial successes that has enabled the company to develop strong partnerships all over the world. Eurotron became a Protected Subsidiary of ASGARD Group in 2010, a group having its main activity in instrumentation with AOIP. Shared expertise and resources within ASGARD will benefit to our customers through more efficient R&D project and additional investments in manufacturing operations.

Ever since our beginning in 1963, Speroni has always applied it “Precision by Design” motto in all its work each and every product that leaves our factory incorporates this. The development of our product is based on t......Ever since our beginning in 1963, Speroni has always applied it “Precision by Design” motto in all its work each and every product that leaves our factory incorporates this. The development of our product is based on the fact that our systems are means of production and as a result they have to produce tangible economic advantages for our customers. After more then 40 years in the development and manufacturing of Tool Presetting and Measuring systems and of Inspection Robots (CMMs) for the geometrical measurement of machined parts in a shop floor environment, we are still convinced that we have to continue to maintain the quality and originality of our solutions guided by the needs of our customers. The functions and solutions characteristic of our market’s demand, have always been dictated by the development and the importance of the tool resource in the manufacturing environment. Speroni has always supplied solutions to the specific demands before anyone else, as documented by our long history. Today Speroni offers a vast line of products and solutions in the fields of Tool Preset, Measurement and Management, and Quality Inspection of the Manufacturing Process. In the future we want to continue to work in close relationship with our customers all over the World in order to understand their needs and offer them the best technical and economical solutions to be made using the most advanced technologies so that more and more companies around the World can benefit from the use of our systems. We continue to invest towards the early “reading” of the market’s needs in order to steer our fundamental research and development activity in the direction that will keep delivering need oriented innovations first.

EXOR International is an alliance of organizations and companies that, thanks to its flexibility and adaptability, is able to turn the market changes and evolution into real opportunities. Such flexibility and adaptabilit......EXOR International is an alliance of organizations and companies that, thanks to its flexibility and adaptability, is able to turn the market changes and evolution into real opportunities. Such flexibility and adaptability are achieved thanks to a particular organization/structure and operating mode. Furthermore, EXOR International capitalizes on the world wide experience, knowledge and recognition built up by its current organizations and companies, formerly known as EXOR Group. The EXOR Group has been and still is the provider of the World Largest Family of Operator Interfaces solutions. EXOR International, though continuing the EXOR Group tradition, does not want to limit itself to the Operator Interfaces. By leveraging the Internet infrastruc ture and taking advantage of the virtual corporation concept, its mission is to research, design, manufacture and sell to the global market automat ion control systems which satisfy customer requirements while respecting both man and the environment.

Experience, quality and reliability: three words to describe the essence of IREM. Founded in 1947 as handicraft business, IREM has developed to the present industrial structure, becoming a leader in the design, manufactur......Experience, quality and reliability: three words to describe the essence of IREM. Founded in 1947 as handicraft business, IREM has developed to the present industrial structure, becoming a leader in the design, manufacture and sale of electromechanical and electronic equipment for the control of the mains power in the following sectors: Powering of discharge lamps for professional applications (rectifiers, igniters and ballast for arc lamps) Protection of electrical equipment against line disturbances (voltage stabilisers, power conditioners, UPS) Energy saving in lighting plants (luminous flux regulators) Generation of green energy (micro hydro-electric power plants) Two manufacturing plants - at Borgone and S.Antonino di Susa (Torino), and a global turnover exceeding EUR 13,000,000 with a direct export share over 50%, are a warranty of continuity and development.

Experience, quality, innovation. These are the characteristics which have enabled FRASCOLD to achieve and consolidate in over 70 years of business, a leading position in the air conditioning and refrigeration compressor’......Experience, quality, innovation. These are the characteristics which have enabled FRASCOLD to achieve and consolidate in over 70 years of business, a leading position in the air conditioning and refrigeration compressor’s worldwide market, both commercial and industrial. Experience Comes from substantial know-how earned during years of activity in the world market of compressors for refrigeration and air conditioning. Quality The high quality standard achieved through the extensive use of the best materials and strict quality tests which result in a product more and more reliable and efficient. Innovation The extended use of world-class engineering and design tools results in a production of refrigerating compressors with innovative solutions meeting the challenge of a market continuously in evolution.

Extensive experience in the design and in the production of corrosion-resistant thermoplastic pumps has rendered Savino Barbera a point of reference in the handling of aggressive liquids and fluids to be protected from co......Extensive experience in the design and in the production of corrosion-resistant thermoplastic pumps has rendered Savino Barbera a point of reference in the handling of aggressive liquids and fluids to be protected from contamination. The special construction of these pumps eliminates the possibility of any contact between metal parts and the liquids, while the selection of materials and manufacturing technologies ensure full compatibly with the products handled, a long operating life and conformity with applicable safety standards. Savino Barbera also offers its technological know-how and its dedicated technical support, guaranteeing the right solutions for all industrial pumping needs: continuous research regarding the manufacturing process and constant attention to the customers problems result in high qualitative standards in terms of reducing environmental impact and optimizing performance. Updated assisted design, a cutting edge test bench for final hydraulic-electrical testing, post-sales consulting, replacement parts and repairs complete the activities offered. Certification Savino Barbera currently boasts of Quality System certification awarded by TV Italy (UNI EN ISO 9001:2000), bearing witness to the validity of its activities and to recognition of its international role. This demonstrates the Piedmontese companys attention to offering services that are always at the forefront and focused on its customers needs.History The Savino Barbera company takes it name from its founder who, in 1947, began manufacturing metal pumps for agricultural irrigation, for construction and for domestic use in general. During the 1960s, the imposing change in industrial processes and the unexpected spread of chemical technologies in almost all fields of production lead the Piedmontese company towards a transformation of its structure and its technologies. In this way production commenced for new electrical pumps built from thermoplastic corrosion-resistant materials which still set them apart today. (continues: history).

F.I.M.A. - Fabbrica Italiana di Manometri ed Affini - was set up in Invorio in 1925 by Vittorio Barcellini and Carlo Curioni with the intention, already apparent in the name itself, to satisfy the growing demand for press......F.I.M.A. - Fabbrica Italiana di Manometri ed Affini - was set up in Invorio in 1925 by Vittorio Barcellini and Carlo Curioni with the intention, already apparent in the name itself, to satisfy the growing demand for pressure gauges and other similar instruments for measuring pressure in industrial processes, during the period of heavy industrial expansion being experienced in Italy during the 1920s. The principal markets were the railways and civil and military worksites: the link was so strong that, for many years, the young employees of Fima, and then of Nuova Fima, were sent by the authorities to perform their military service in the Italian Navy, despite coming from the foothills of the Alps. The Great Depression of 1929 slowed down growth of the burgeoning young company, without stopping it completely, with the result that, once the storm had passed, it was able to participate in the new phase of expansion during the second half of the 1930s.The outbreak of the Second World War, after the initial positive impulse given by the weapons industry, rapidly led to a period of stagnation which soon turned into a recession, caused by the adverse way the war was going. The immediate post-war period was a time of great hope but few opportunities and differences between the two partners led to closure of the company.However, Giuseppe Garbarino wanted to continue his activities and found new partners, in the person of Vincenzo Zaveri and Carlo Barbaglia, both just twenty-three at the time, for a new business venture. On 30 April, 1948, the company was reincorporated, again in Invorio, with the name "Nuova Fima di Garbarino, Barbaglia e Zaveri, societÀ a responsabilitÀ limitata". The company started off with a new life-force and, taking advantage of the boom following the second post-war period, started the major expansion which led to it increasing in size tenfold in less than twenty years. Initially, the sectors where it operated were the same as in the 1930s, but the appearance of new materials and the demand for products capable of measuring the corrosive fluids used in the chemicals and petrochemicals sectors soon led Nuova Fima to move into the production of stainless steel instruments. The expensive drawing and smelting processes were abandoned in favour of turning and welding and, in 1956, the new factory was inaugurated in via Cesare Battisti 59, which is still the Groups main centre of pressure gauge production. The company continued to develop during the 1960s, with opening of sales offices in Milan and Padua, as well as on the first foreign markets, in Belgium and Rumania. The company focused increasingly on the oil and plant engineering markets and the production of pressure gauges made entirely from stainless steel became a reality, contributing to the company workforce exceeding one hundred employees. In 1966, Giuseppe Garbarino retired, selling his share to Carlo Barbaglia and Vincenzo Zaveri, who became the sole partners in the company from that moment. On the basis of the successes achieved, Nuova Fima entered the new decade as the leading Italian manufacturer in the sector, a position it has held ever since and actually strengthened over the years. The 1970s were characterised by decisive entry onto the major European markets and the first non-European sales. The invention of the glycerine bath pressure gauge, which allowed readings even in the case of strong vibrations, involved all the worlds leading manufacturers, among which Nuova Fima stood out. The workforce reached and exceeded two hundred employees and thermometer production also started, at the new Riells i Viabrea plant, in Spain, in 1973. Towards the end of the 1970s, quality became increasingly important and Nuova Fima began collaborating with the ENEA (National Atomic Energy Agency) on the National Nuclear Energy Development Program and thereby completed the first internal Quality Control System, the basis of development of all subsequent quality plans, which would lead to obtaining of USA 3A certification for health and food products in 1992, ISO 9002 certification in 1995 and, subsequently, ISO 9001:2000.

F.M.B. was set up in 1982 and was one of the very first companies to propose band sawing machines at a time when the market was dominated by circular saws. Since then, thanks to its great ability to evolve, to research in......F.M.B. was set up in 1982 and was one of the very first companies to propose band sawing machines at a time when the market was dominated by circular saws. Since then, thanks to its great ability to evolve, to research innovative products and to modify the machine to suit the customers actual needs, F.M.B. has became a leading company in this sector. Its buildings represent the best in modern design, concentrating on maximum practicality and with sufficient space for all departments necessary to the creation of a new product: engineering, production and testing. Not to mention the commercial and administration office block, warehouse and dispatch area. Our present range is made of 30 models whose cutting capacity goes from ø 220 mm up to ø 630 mm together with a complete set of solutions for material handling. In all these years the basic concepts of our machines have always been the same: quality, solidity and reliability. Even today, our new models, introduced at the end of last year, have these same characteristics and the changes they present are simply the consequence of technological progress.

FAMATEC was founded in 1988 and is a certified UNI EN ISO 9001:2000 firm. We study and create pneumatic solutions for assisted manual movement of products during the productive process of manufacturing companies. The youn......FAMATEC was founded in 1988 and is a certified UNI EN ISO 9001:2000 firm. We study and create pneumatic solutions for assisted manual movement of products during the productive process of manufacturing companies. The young and dynamic spirit that has distinguished FAMATEC over the years combined with competence and know-how has driven the company towards new ambitious growth and market objectives. Our strengths are our products, all highly developed technologically, innovative solutions with unique design.