Give me a place to stand, and I will move the earth. The objectives at the start of production more than 50 years ago were perhaps not so ambitious. The key idea was to remove the weight factor from work. This innovative ......Give me a place to stand, and I will move the earth. The objectives at the start of production more than 50 years ago were perhaps not so ambitious. The key idea was to remove the weight factor from work. This innovative concept gave birth to a company, which is now a jewel of the regional and national economy: Dalmec. A successful idea, which when applied to the question of how to move goods and semi-finished products along production lines, has led to the first concept of manipulator. Making Dalmec the world leader in engineering and manufacturing of industrial manipulators. is the world leader in the field of industrial manipulators. 50.000 Manipulators are in use throughout the industrialised areas of all five continents. It is an industrial organisation which is at the same time both flexible and specialised, geared to cater for the ever-increasing demands in manual handling of loads. It is a totally integrated Company. All processes, from design to production to final testing are carried out exclusively by Dalmec personnel at our Cles plant, which extends over an area of 25,000 square metres, of which 12,000 are under cover. Designed to optimize human resources in any production or logistics chain, with an immediate impact on work quality and profitability, Dalmec manipulators are the result of elevated engineering capabilities applied to the study of production processes, and are customized according to the performance required: gripping, moving and positioning. Functional analysis, 3D CAD design, study of the different technical solutions available, simulations, prototype creation are all phases in the production process that Dalmec carries out in close partnership with the client, with continuous controls and review during project development. Design New applications and solutions are constantly enhancing our collective experience, which already spans over 35 years in this field. Well-trained design staff are able to develop state-of-the-art equipment, which ensure the operators ergonomic use of the Manipulators. Every project is developed according to the instructions given by the EEC standard 98/37 “Directive on Machinery” and after a careful and a methodical analysis of the risks. Production Work stations fitted with state-of-the-art equipment. Highly qualified technical personnel and operators. Stock management Computerised stores for raw materials, semi-manufactured products and components. Designed and manufactured in the plant in Cles, Dalmec manipulators are the product of ingenious technical solutions, high-precision production processes, high-quality raw material and components allied with unmatched technical capabilities applied in accordance to the procedures and methodologies laid out in EN ISO 9001: 2000 certification. All Dalmec manipulators, whether with rigid arm or cable, column or overhead mounted, are subject to continuous tests and checks, even after installation, to guarantee safety and durability. Customized and designed in function of the specific movements, operations and requirements of the production processes of each individual client, Dalmec manipulators ensure the movement of loads in any direction and in a weightless condition. Dalmec plans for the optimization of its products, with regard to ergonomics and safety in particular, by involving every phase of the manufacturing process of a Manipulator, from design to final testing up to the technical assistance and customer service. Dalmec tests and tries out each Manipulator using advanced equipment in the specially designed plant.

GS Scaffalature Srl was set up in 1975 to manufacture metal structures for storing industrial goods. The name of the company is taken from the initials of the founding partners’ surnames, Grigolo and Scapin, who started ......GS Scaffalature Srl was set up in 1975 to manufacture metal structures for storing industrial goods. The name of the company is taken from the initials of the founding partners’ surnames, Grigolo and Scapin, who started their business with the help of just two workers. In 1989 the first 1000 square-metre manufacturing shed was opened, where they started to produce the first shelving using semi-automatic machines. By taking part in and displaying their products at trade fairs, GS Scaffalature started to get their name known not only in Italy but also abroad, thus growing both in terms of company organisation and products and services so as to provide their customers with solutions that are always new and competitive. In 1991 GS Scaffalature Srl became a company limited by shares and changed its name to GS Scaffalature Engineering SpA. Thorough study of the market and the needs of customers in different industries have led to re-engineering of production and the acquisition of new automated machines. GS Scaffalature today has 30,000 square metres of manufacturing sheds, 200 employees and 14 production lines with automated systems that work in continuous cycle.

GSBI has been designing and manufacturing for more than 50 years AUTOMATED SYSTEM FOR BULK MATERIAL HANDLING. GSBI means Turn key industrial plants & single components for bulk solid handling, and namely: - Vertical stora......GSBI has been designing and manufacturing for more than 50 years AUTOMATED SYSTEM FOR BULK MATERIAL HANDLING. GSBI means Turn key industrial plants & single components for bulk solid handling, and namely: - Vertical storage silos and tanks - Automated systems for pneumatic and mechanical conveying - Scales, weighing systems for batch or continuous dosing - Mixers and Blenders - Filters, and pellet cleaners - Automated systems BI business: bulk solid handling. GSBI market: commodities manufacturers commodities users. GSBI market segment: Food & pharmaceutical, Plastic, Petrochemical, Rubber, Chemical. GSBI corner stone. Vertical Storage Pneumatic Conveying Dosing Mixing & Blending Dedusting GSBI means turn-key plants for bulk solid handling and single components. Our competitive advantage is the so called “GSBI convey-ability®”. Pneumatic Conveying technology. – Million tons of bulk materials are conveyed by GSBI plants all over the world, every hour in 365 days a year. – Feed back from thousands of plants manufactured. – 50 years’ experience. – Design expertise. – Proud to be leader in Pneumatic Conveying technology. GSBI mission & philosophy:Better conveying through experience and innovation. In house design & manufacturing. First class company skill. Optimized company size. Safety first & Environment respect. Test plant available (for new materials & devices) Tailored solution & Flexibility. GSBI strategic elements. The Location: the industrial district within the Bologna, Modena and Ferrara area triangle is renowned in Italy and worldwide for the excellence of its sports car, packaging, fine chemicals, machine tools, automation and industrial plants industries. The Group: the financial strength of the Group Holding PARITEL, and the synergy with the other group-member companies. The Outsourcing: Traditional local suppliers and new sources in emergent Countries.

Having operated for over twenty years in the hydraulic hose tooling sector, today, OP can boast a wide range of products and an outstanding service in various markets worldwide. Manufactured in compliance with EC standard......Having operated for over twenty years in the hydraulic hose tooling sector, today, OP can boast a wide range of products and an outstanding service in various markets worldwide. Manufactured in compliance with EC standards, our products simultaneously combine quality, innovation and safety. OP’s successful strategy is renowned all around the world, attracting an ever growing number of customers, fully satisfied with our products. Constant growth has been achieved thanks to global expansion of our sales network and considerable investments in R&D, fundamental to guarantee a steady flow of new products. Although it is still a medium-to-small sized enterprise, OP has acquired confidence and trust at international level.

HINOWA was founded in 1987 by a group of professionals who combined their strong points, a good dose of optimism and a little luck to build a modern company focussed on the market and its demands. The HINOWA headquarters ......HINOWA was founded in 1987 by a group of professionals who combined their strong points, a good dose of optimism and a little luck to build a modern company focussed on the market and its demands. The HINOWA headquarters are in Nogara, in the province of Verona, along highway number 12, in the north of Italy. The headquarters cover a surface area of 30,000 m², with 13,000 m² dedicated to the manufacturing facilities and office buildings. The company has a staff of more than 80 people. Production is divided into five main product categories, which are: • Tracked aerial platforms • Tracked mini excavators • Tracked mini dumpers • Wheeled loaders • Tracked undercarriages The HINOWA product range is well-known and appreciated in many parts of the world, the main markets still being Italy and Europe.

HSD SpA is a young dynamic company located at the heart of the Pesaro furniture production centre, the home of numerous companies operating in the woodworking sector. A passion for mechanics coupled with a strong orientat......HSD SpA is a young dynamic company located at the heart of the Pesaro furniture production centre, the home of numerous companies operating in the woodworking sector. A passion for mechanics coupled with a strong orientation towards customer satisfaction has made HSD a thriving company, and a leader in Italy in the production of right angle heads, electrospindles, 5 axis boring machining heads and CNC boring heads for machining wood, aluminium, marble, glass and PVC.

Hydrocar was founded in Modena in the late 1970s with a very precise purpose: offer new power take-off mechanisms and devices to a variety of hydraulic systems for industrial vehicles.The hundreds of models created over t......Hydrocar was founded in Modena in the late 1970s with a very precise purpose: offer new power take-off mechanisms and devices to a variety of hydraulic systems for industrial vehicles.The hundreds of models created over the years and the many configurations applied to our components allow us to confidently state that this objective has been positively fulfilled. The constantly increasing number of trucks around the world equipped with Hydrocar PTOs and pumps offers the greatest satisfaction for so many years of hard work and commitment. Hydrocars headquarters are in Nonantola, just outside Modena (Italy). The modern site has a floor space of 8000 m2 and, along with the logistics and management activities, houses also the design and development procedures, which are certainly state-of-the-art as regards technology and equipment. Continuous professional and qualitative improvement allows Hydrocar to establish itself on the world scene as partner of the major body-builders. In the most recent years Hydrocar has moreover become primary supplier of several important OEMs, including: Iveco Eaton () Renault Truck Volvo Truck Daf Scania Hyundai/Kia() Through Eaton, Hydrocar PTOs are used as original components by many other Industrial Vehicle Manufacturers.

I look around me and I see the Company driven by motivated people that master technology and find the way out of difficulties by anticipating ideas often crucial to the business evolution. What’s the key word of our suc...... I look around me and I see the Company driven by motivated people that master technology and find the way out of difficulties by anticipating ideas often crucial to the business evolution. What’s the key word of our success Provide customers all over the world with experience, technology, reliability and innovative solutions that improve the overall quality of life in the work place . I am proud of what we are today, I am proud of a tradition of over 50 years of excellence. I also cherish the trust of our valued customers who will always find with the Thomas brand : - Complete line of products and the right relationship between quality and price - High level technical support - Flexibility in the management and in the development of strategies - Continuous education of technical and service specialists for superior customer service. We have gained wide experience by discerning Partners, we are pursuing the balance between tradition and technology, we stimulate the creativity and the flexibility, and we love our job. Italian style, solid local roots and open mind thoughts, this is what thousands of Customers all over the world can rely on

I.MA.L. Group was founded in 1967 on the initiative of Carlo Barzaghi and Dionigi Ponti that after having acquired a specific technological experience, decided to build presses and shears, ensuring optimal time position o......I.MA.L. Group was founded in 1967 on the initiative of Carlo Barzaghi and Dionigi Ponti that after having acquired a specific technological experience, decided to build presses and shears, ensuring optimal time position on the market and a reputation for holding technically vanguard. The know-how achieved in the design and manufacture press brakes, shears, cutting lines, line and profiling machines for cutting sheet metal plasma contributes to become IMAL Group leading the industry, thanks to the high quality and the strong price competitiveness. IMAL Group obtained the ISO 9001 in 2000 confirming high levels of quality in the design, the manufacturing, customer relations and the entire organization. In early 2004 I.MA.L.Group initiated a process of evolution of the activities that led to the drafting of an industrial plan aimed at turning the company in order to make it competitive, robust and suitable to play a role leadership in bringing in the second generation of entrepreneurs, whose contribution to the professionalism of all the managers and employees have permission to activate a process of effective management based on the involvement and confrontation. Today the society is divided on an establishment of about 4,000 square meters covered a total area of 6500 square meters a staff of 40 people and agencies selling spread worldwide. The mission of IMAL Group is to improve the dialogue with customers in order to meet the demands and anticipate the expectations in terms of trends in products and services.