A comprehensive range of P.P.E (Personal Protective Equipements) To make your purchases easier, we offer you a comprehensive range of products: - Head protection : helmets, spectacles and goggles, ear-muffs… - Protection......A comprehensive range of P.P.E (Personal Protective Equipements) To make your purchases easier, we offer you a comprehensive range of products: - Head protection : helmets, spectacles and goggles, ear-muffs… - Protection of the body: garments against cold, high-visibility garments… - Hand protection: all types of gloves, in any material - Foot protection: safety shoes, boots… An expert in P.P.E. (personal protective equipment) Selling P.P.E. is not something that should be taken lightly, and our expertise in this field goes back a long way. This is the fruit of long years of experience and learning where production processes and materials etc... are concerned. Ongoing sales support. Our teams both in the office and out in the field are always ready to listen to your needs and offer daily advice to help you find the solution best suited to your requirements.To bring our services ever closer at hand, our website provides a regularly updated source of information.

A global leader in manufacture of glass-lined equipment for chemical and pharmaceutical industries, founded in France in 1684.

A historical tradition of precision comes with LFA chucks. Indeed, the manufacturing plant is situated in one of the most spectacular valleys in the Jura region, where watches and other horology tools have been made for m......A historical tradition of precision comes with LFA chucks. Indeed, the manufacturing plant is situated in one of the most spectacular valleys in the Jura region, where watches and other horology tools have been made for more than a century. This precision, applied to the manufacturing of LFA chucks, creates high performance tools demonstrating an exemplary longevity. LFA continuously focuses its efforts on Research and Development. It has also added to its product range new patented chucks, including keyless chucks with a hand-tightening system, with or without any locking system, in order to satisfy the needs of its customers on a global scale.

A Key player on the market for control and signalling units, cam switches and switch disconnectors, Baco is recognised for its professional expertise and compliance with safety standards.Baco is committed to a quality cha......A Key player on the market for control and signalling units, cam switches and switch disconnectors, Baco is recognised for its professional expertise and compliance with safety standards.Baco is committed to a quality charter based on the quality and reliability of its numerous and flexible solutions.

A Leader Company Alpha MOS France Alpha MOS is an analytical instrumentation company which was set up in 1993 to develop, manufacture and market Electronic Noses and Tongues worldwide. It was the first company to introduc......A Leader Company Alpha MOS France Alpha MOS is an analytical instrumentation company which was set up in 1993 to develop, manufacture and market Electronic Noses and Tongues worldwide. It was the first company to introduce Electronic Noses to the market. Various of Alpha MOS developments are patented. A Worldwide Network Alpha MOS owns 3 sites (France, USA and China), has a worldwide network of distributors and provides a technical support worldwide. Distribution of Chromatography Products in France Alpha MOS also distributes, in France, leading edge instruments and solutions dedicated to gas and liquid chromatography. A Company Listed at the Stock Exchange Alpha MOS is listed on Euronext Paris, Compartiment C (equivalent of US NASDAQ) on the Paris stock exchange.

A modern production facility based in Mildenhall, Suffolk, UK, exclusively engaged in the design and manufacture of instrumentation for vibration and acoustic measurement, together with a sales office situated in Verdun, ......A modern production facility based in Mildenhall, Suffolk, UK, exclusively engaged in the design and manufacture of instrumentation for vibration and acoustic measurement, together with a sales office situated in Verdun, France. The company has also a distribution network in several countries. Product range Piezo-electric vibration transducers (mono axial and triaxial accelerometers) and dynamic pressure transducers, Analogue signal processing instrumentation. Engineering capability All facets of transducer/instrumentation manufacture and test are carried out in house, and encompass fabrication of piezo-ceramic components, hermetic seals and connectors, thick film hybrid electronic products, environmental testing. Customer support Accelerometers are application specific. We advise users of the environmental constraints relative to individual transducers, hardware is made available for evaluation. Standard product is stocked in depth for rapid response. We have in house our own calibration facilities. Quality Virtual 100% inspection and test, supported by continuous assessment of all facets of manufacture, maintains a high standard of product excellence. Environmental test facilities, simulating actual useage, eliminate uncertainty. Approvals Our quality management system is BS EN ISO 9001 : 2000 approved PRODUCT INFORMATION Piezo-electric accelerometers Piezoelectric accelerometers based on ferro electric ceramics first surfaced in the late 40 as means of collecting data on the dynamic behaviour of airframes and a variety of military and avionic hardware, supplanting the heavier, less robust velocity transducer. Early devices comprised a piezo-ceramic disc sandwiched between a reaction mass and a cylindrical base (the means of attachment to the test object), and this manner of construction features in several manufacturers products today. However the art has moved on disadvantages inherent in this compression disc design, namely high strain sensitivity and cross axis error, preclude their use for many applications and have directly led to several innovations whereby the acceleration/charge conversion is accomplished by means of a shear couple applied to a piezo-ceramic plate or tube. Specifically, our KONIC design (UK pat. 1507251), comprising a truncated hollow piezo-ceramic cone, spigot, and concentric reaction mass, provides virtual isolation of the sensing element from mounting induced strain, with the further benefit of minimal cross axis error deriving from its radial symmetry. In addition, the KONIC sensing element is mechanically preloaded, temperature constraint imposed by use of adhesives is eliminated. KONIC accelerometers are produced in sizes from 0.25gm, weight, 0.5pC/g (A/28/E) sensitivity upwards, maximum 90gm., 300pC/g (A/21, A/21/T). Between these two types we have a large range of accelerometers to accommodate both size/weight or sensitivity requests (A/25/E, A/23/E, A/24/E, A22, A/20, A/29? Piezo-ceramic shear plate technology is employed at the periphery of the KONIC range as offering miniaturisation advantages, and sensitivity enhancement by virtue of parallel plate construction. A/600, A/600/T (1.2nC/g, 110gm), A/800, A/800/T, A/800/TC (9nC/g, 400gm). From 2gm weight all the accelerometers are proposed either with a charge output signal (for instance : A/24/TE, A/20/T, A/20/TC, A/21) and with a voltage output signal, integral electronics accelerometers (corresponding references A/124/TE, A/120/VT, A/120/VTC, A/121/V). Sensitivity in these cases and according to accelerometer type can be from 6, 10, 31.6, 100, 316mV/g to 1V/g and more. Some of them can include TEDS facility, internal memory compatible with IEEE P1541.4 (for instance A/120/VM, A/120/VTM, A/120/VTCM). We propose also some triaxial accelerometers, these tri-axial accelerometers can be also charge output or integral electronics type. They are produced in sizes from 0.9gm (A/38, A/38-1), 7gm (A/32, AT/04 with a single connector), 18gm (A/31, A/34, A/34-2, A/131/V, A/134/V, A/134/V-3) , 38gm (A/30, A/30-1, A/130/V) and a water cooled triaxial accelerometer (A/33, A/33-3, A/33-10). For long term monitoring of plant and machinery in industrial and under severe operating conditions including high pressure fluid immersion, high temperature we have a special range of accelerometers which can even used hardline cable (A/52/F,A/52/F/HT, A/53/F, A/53/F/HT, A/81/F, A/81/F/HT, A/107/F, A/107/F/HT, A/301/F, A/301/F/HT, A/172/VF). Piezo-electric microphones Dynamic pressure transducers based upon piezo-ceramics allow detection of acoustic type phenomena, turbulence, cavitation, associated with fluid flow, and are produced in two basic packages (M/01/F, M/01/T, M/?/F, M/02/T, M/02/TI-1). For applications involving significant background vibration, accelerometer compensation may be included (M/01/F1, M/01/TA, M/02/FA, M/02/TA). The high sensitivity and linearity of these devices allows detection of acoustic levels as low as 70dBA superimposed upon pressure

A promoter of sustainable mobility, Alstom Transport develops and markets the most complete range of systems, equipment and services in the railway sector. Alstom Transport manages entire transport systems, taking in roll......A promoter of sustainable mobility, Alstom Transport develops and markets the most complete range of systems, equipment and services in the railway sector. Alstom Transport manages entire transport systems, taking in rolling stock, signalling and infrastructure, and offers “turnkey” solutions. The company is no. 1 in the high and very high speed train sector and keeps investing in high end segments, while developing products suited to the specific needs of the emerging markets. During fiscal year 2010/11, Alstom Transport registered large orders for locomotives in Russia and Kazakhstan, regional trains in France and Sweden, very high speed trains in Morocco, metros in Canada, Santo Domingo, Panama, India and Brazil as well as tramways in France and Tunisia. Maintenance contracts for mainlines fleets were registered in the USA, as well as a number of signalling contracts in Europe and China. Alstom Transport’s sales slightly declined at €5.6 billon (compared to €5.8 billion during fiscal year 2009/2010), while its operating margin remained globally stable around 7%. Alstom Transport is present in over 60 countries and employs some 27,000 people.

A recognized technological heritage Recognized for our technological expertise heritage and the high quality of our products, we has become one of the world leaders in the field of load cells and industrial measurement. W......A recognized technological heritage Recognized for our technological expertise heritage and the high quality of our products, we has become one of the world leaders in the field of load cells and industrial measurement. We are a preferred partner for many industries such as weighing, chemicals, food processing, metallurgy, aeronautics, medical, packaging, etc. A global player at your service We are present in more than 40 countries through a network of subsidiaries, partners and specialized distributors. Due to this proximity, we provide a service and logistics to efficiently support our product range. Our head office, located in ANNEMASSE (France), has a floor area of 4 300 m² and houses our Sales & marketing services, the R&D department and assembly lines dedicated to strain gauges and load cells manufacturing. Our modern equipments include clean room, climatic chambers, laser welding robots and tied calibration means. In addition, We benefit from group production means based in Shenzhen (China). With this integrated, flexible and modern set of production solutions, we are able to guarantee the best quality-price ratio for unit deliveries or for large series. A philosophy: Innovation and quality All our activities are ISO 9001:2000 certified and we guarantee that our products are conforming with international standards and codes. This commitment to the continued improvement of our processes is intended to create a sustainable long-term relation with our customers. Our growth strategy also involves very high investments in research and development, so that we can offer innovative solutions.

A young engineer trained at the Arts and Métiers school, Jean POLLARD filed the patent which would see the birth of the "CMtec" technology pump in the mid-1940s. The first factory, built close to Paris, was soon running a......A young engineer trained at the Arts and Métiers school, Jean POLLARD filed the patent which would see the birth of the "CMtec" technology pump in the mid-1940s. The first factory, built close to Paris, was soon running and the first clients were the Railways, manufacturers of machine tools and the steel industry. In 1963, the factory was transferred to Sanary in the South of France, between Toulon and Marseille. For 35 years the company developed under the management of Jean POLLARD who left the company for health reasons in 1976. The Pollard brand became a reference in the world of the industrial volumetric pump. In 1997 the current management took over the company, and since then it has developed the three following product ranges: - a range of pumps and motor-pumps - a range of drum drainers - a range of special products The companys current strategy puts the emphasis on commercial reactivity in response to French or international demand and on the ability of our design office to adapt our products technically, if necessary, to meet clients specific requirements. Inaugurated in 2004, the brand new factory at Signes (Var) with its modern production equipment and optimised systems (ISO 9001) has allowed us to increase production capacity and to achieve delivery times for all the range that are among the shortest in the industry. The whole product range is Atex european norm certified. Pompes Pollard is today appreciated by its clients for its flexibility and its ability to offer "tailor-made" pumping systems in both short and long production runs.

A.E.E.S. (Automatic control Energy Electronics Systems) designs, manufactures and markets a wide range of industrial power converters for human and machine safety. For decades, many customers placed their confidence in th......A.E.E.S. (Automatic control Energy Electronics Systems) designs, manufactures and markets a wide range of industrial power converters for human and machine safety. For decades, many customers placed their confidence in the industrial battery chargers, the safety power supplies, either AC or DC, the DC to DC converters, the inverters and UPS’s, the control and protection relays. They rely on the professionalism of AEES services teams to maintain and protect their buildings or their operations. With a 30 year experience in Power Electronics, AEES is a company dedicated to its customers. Its main focus is to provide tailored energy solutions, from optimized product lines to customized solutions meeting the highest safety requirements. With an important share of its revenues devoted to R&D, AEES has been able to develop technologies whose robustness and reliability have long been demonstrated on site. Certified ISO 9001 since 1996, through its services, AEES is committed to serve, assist and maintain its customers present in more than 70 countries.