150-type milling excavator
Crawler travel, integrated milling, excavation and conveying
Suitable for roadways of 3*3 meters and above
Milling excavator features:
The hydraulic ZWY-80 milling excavator can work during excavation of coal roadways and semi-coal roadways with a hardness of 4F without blasting, replacing the roadheader. It can achieve conversion among the four major functions of "loading, turning, excavating and transporting" in a short time, greatly saving costs, solving the difficulties of narrow and trimming mine roadways, and realizing mechanized operation of underground roadway repair. At the same time, the machine is equipped with a quick connection device. During rock bolting excavation, the bucket and milling head can be quickly interchanged. After blasting, the bucket is used for loading slag, realizing the feature of dual use in one machine.
High-speed single-drive milling head
Super wear resistance, high efficiency
High-torque dual-drive milling head
Fast installation, multiplied output
ZWY-150 type milling excavator technical parameters
| Indicator | Unit | ZWY150 type milling excavator |
| Overall dimensions (L*W*H) | MM | 7000*2100*2600 |
| Loading capacity | M3/H | ≤150 |
| Total machine mass | KG | 15500 |
| Minimum turning radius | M | 4.5 |
| Excavation width | MM | 3800 |
| Excavation depth | MM | 600 |
| Excavation height | MM | 4000 |
| Digging distance | MM | 2050 |
| Unloading height (customizable) | MM | 1900 |
| Unloading distance (customizable) | MM | 2100 |
| Adaptable climbing gradient | ° | ±25 |
| Total motor power | KW | 75+55 |
| Travel speed | KM/H | 2.1 - 3.6 |
| Maximum milling pass size | MM | 600*450 |
| Applicable cross-section | M | 3*3 |
| Milling head diameter | MM | 460 |
| Milling head rated power | KW | 37*2 |
| Milling head working pressure | MPa | 31.5 |
| Milling head flow rate | L/Min | 90 |
