ConST870 Intelligent Pressure Controller price_Manufacturer_How much

1/1

ConST870 Intelligent Pressure Controller

Negotiable

Beijing ConST Instruments Technology Inc.

Located Region:

China

Address:

Building 5, No. 3 Fengxiu Middle Road, Haidian District, Beijing

Biz Consulting:

+86 010-56973333

E-mail:

office@constgroup.com

Online Contact

Favorite

Model Name	ConST870 intelligent pressure controller
Order Code	870-LP	870-D	870-7M	870-25M	Oil: 870-70M Water: 870-W-70M	Oil: 870-100M Water: 870-W-100M
Maximum control pressure range^①	(-95~100)kPa	(-99~250)kPa	(-0.099~7)MPa	(-0.099~25)MPa	(0~70)MPa	(0~100)MPa
Type of foundation pressure	Differential pressure	Differential pressure	Gauge pressure	Gauge pressure	Gauge pressure	Gauge pressure
Working medium^②	Gas	Gas	Gas	Gas	Liquid	Liquid
CDPA Control Pressure Module (High Pressure Slot)	Optional 10kPa ~ 100kPa	Optional 10kPa ~ 250kPa	Optional^⑧ 400kPa ~ 7MPa	Optional 10MPa ~ 25MPa	Optional 25MPa ~ 70MPa	Optional 25MPa ~ 100MPa
CDPA Control Pressure Module (Low Pressure Slot)	Minimum Optional ± 250Pa	Minimum Optional ± 2.5kPa	Minimum Optional ± 60kPa	Minimum Optional 1MPa	Not applicable
External CDP Pressure Module	Measurement only				Controllable pressure, minimum optional 6MPa
Switch between gauge and absolute pressure	Have (optional CDPA atmospheric pressure module)
Control mode	Fast, standard, custom
Maximum load volume^③	500mL	1000mL	1000mL	100mL	80mL^④	60mL^④
Control response time^⑤	<10s				<30s
Control stability^⑥	≤ 0.003%FS or 0.05Pa, take the larger one.	≤0.003%FS Typical ≤ 0.001%FS	≤0.003%FS Typical ≤ 0.001%FS	≤0.003%FS Typical <0.001%FS	≤0.005%FS Typical ≤ 0.003%FS	≤0.005%FS Typical ≤ 0.003%FS
Target pressure stabilization time.	> 5min
Pressure source type	Built-in air source	External air source	External air source	External air source	Built-in hydraulic power	Built-in hydraulic power
Maximum source pressure^⑦	Not applicable	400kPa	8MPa	28MPa	Not applicable	Not applicable
Pressure interface	Outside G1/4
Interface Filter	(40~100)μm

①The minimum vacuum is based on an atmospheric pressure of 100 kPa.a;

②Gas refers to clean and dry xenon or air; wave refers to diisooctyl sebacate or purified water;

③The volume of the built-in liquid storage tank of the hydraulic version is 800mL;

④The hydraulic version can increase the load volume to 250mL through the optional external load expander;

⑤Test conditions for pneumatic version: external load volume 50mL, 20% stepping, reaching 0.005%FS stability; Hydraulic version test conditions: external load volume 10mL, 20% stepping, reaching 0.005%FS stability;

⑥When the typical control stability is reached, the control response time will be extended.

⑦It is recommended that the air source be equipped with appropriate pressure reducer to ensure safety. It is recommended that the air source pressure be adjusted to 110 or 100kPa of the maximum pressure of the pressure control module, take the larger one;

⑧870-7M and 870-7M versions, the maximum high-low range ratio of the pressure control module is 20:1.