The ConST285 Intelligent Pressure Calibrator integrates the full functionality of a HART handheld communicator, loop power supply, and pressure indicator. With just one device, it can perform on-site pressure calibration, troubleshooting, and maintenance tasks, significantly improving on-site work efficiency!
ConST285 Intelligent Pressure Calibrator
Product Introduction
Product Parameters
Table 1: General indicators
|
Project |
Specifications |
|
Display |
5.0 inch 480 x 800TFT LCD capacitive screen |
|
Dimensions |
177mm × 105mm × 52mm |
|
Weight |
0.70kg |
|
Power |
6600mAh, 23.8Wh lithium ion rechargeable battery, the battery pack can be charged independently; Special adapter power supply, maximum supply current 2A |
|
Charging mode |
Use ConST dedicated 5V adapter for power supply, charging time is about 4 hours |
|
Battery working time |
16 hours under typical operating conditions |
|
Environmental conditions |
Ensure the temperature range of technical indicators:(10~30)℃ Operating temperature range:(-10~50)℃ Storage temperature range:(-30~70)℃ Ambient humidity: 0% to 95% RH, non-condensing Maximum altitude: 3000 meters |
|
Port protection voltage |
50Vmax |
|
CE certification |
TUVIEC61326, IEC61010 |
|
Rohs Compliance |
RohsIIDirective2011/65/EU,EN50581:2012 |
|
Protection level |
IP67, 1m drop test |
|
Communication |
Isolated USB-TYPEC (slave), Bluetooth BLE |
|
External Pressure Module |
Dual-channel aerial plug for connection of two digital pressure modules |
Table 2: Technical Indicators
|
Measurement signal type |
Measurement range |
Resolution |
Accuracy |
|
Voltage |
(-300~300)mV |
1μV |
0.005%RD+15μV |
|
(-30~30)V |
0.1mV |
0.005%RD+1.5mV |
|
|
Current |
(-30~30)mA |
0.1μA |
0.008%RD+1.2μA |
|
Frequency |
(0.01~5)Hz |
0.00001Hz |
0.002%RD+0.00002Hz |
|
(5~50)Hz |
0.0001Hz |
0.002%RD+0.0002Hz |
|
|
(50~500)Hz |
0.001Hz |
0.002%RD+0.002Hz |
|
|
(500~5000)Hz |
0.01Hz |
0.002%RD+0.02Hz |
|
|
(5000~50000)Hz |
0.1Hz |
0.002%RD+0.2Hz |
|
|
Duty cycle |
(1% ~ 99%)@ ≤ 10000Hz |
0.01% |
0.1%/kHz+0.05% |
|
(5% ~ 99%)@ ≤ 50000Hz |
0.1% |
||
|
Switching on/off |
Support dry switch, wet switch inspection Voltage range:(3~30)V Response speed: less than 10ms |
||
|
Atmospheric pressure |
Optional function, (60~110)kPa.a, ± 55Pa, user can calibrate |
||
①When the ambient temperature is (-10 ~ +10)℃ and (30~50)℃, the temperature coefficient is: voltage and current: ± 5ppmFS/℃;
②Input characteristics: voltage range:(-300~300)mV input impedance> 100MQ; Voltage range:(-30~30)V input impedance> 1MΩ; Current measurement: input impedance <40Ω;
③Minimum threshold voltage for frequency and pulse measurement: 2.5V;
④Frequency measurement support units: Hz, kHz, MHz, CPM, CPH, s, ms, μs
Other products from this supplier

ACal Pressure Calibration/Verification System Software

ConST 125 Intelligent Multi-Channel Pressure Calibration Device

ConST801 Intelligent Identification Device

CDP modular pressure calibrator

ConST870 Intelligent Pressure Controller

ConST860 Intelligent Pressure Controller

CDPM Modular Pressure Calibrator

ConST810 Handheld Fully Automatic Pressure Calibrator

ConST811A Intelligent Fully Automatic Pressure Calibrator
Related Products
ZH3C-72.5 Environmentally Friendly Gas-Insulated Metal-Enclosed Switchgear 72.5kV, 3150A, 40kA
Amorphous Alloy Dry Type Transformer
Outdoor High-Voltage Integrated Primary and Secondary Circuit Breaker LW3-12
ConST811A Intelligent Fully Automatic Pressure Calibrator
Smart IoT Terminal for Cable Channel
New Energy Low Temperature Vehicle Capacitor Energy Storage 5000F Small Volume Large Capacity Power Voltage 2.7V Super Farad Capacitor Wholesale
Z Series Low Voltage Switchgear
GSR(XGN)-40.5/T2500-31.5 SF6 Freee Gas-insulated Metal-enclosed Switchgear(RMU)
