New South Wales, Australia, Unveils Design for Harris Gates Rail Overpass

2026-11-17 14:39
Favorite

en.Wedoany.com Reported - On November 16, Transport for New South Wales, Australia, released the concept design and environmental impact assessment report for the Harris Gates level crossing upgrade project, which proposes to build a road bridge over the railway near Illabo to replace the existing level crossing on the Olympic Highway. The plan includes constructing a three-span road bridge approximately 104 meters long and 15 meters wide, and realigning about 3.4 kilometers of the Olympic Highway. The project is currently in the public consultation phase, with feedback collection continuing until December 11.

The bridge is located approximately 2 kilometers northeast of Illabo in New South Wales, spanning the rail corridor operated by the Australian Rail Track Corporation (ARTC). The new bridge adopts a grade-separated configuration with the road passing over the railway, featuring one motor vehicle lane in each direction. Approach roads and embankment fill sections of up to approximately 10 meters in height will be constructed at both ends of the bridge, along with associated adjustments to the road gradient and connection locations to meet highway vehicle traffic requirements.

The road works also include realigning approximately 300 meters of Warrens Lane and adjusting its intersection location with the Olympic Highway. Some sections of the existing Olympic Highway will be converted into property access roads along the route. The project also involves restoring existing access points, constructing drainage culverts, and building vegetated drainage channels leading to Billabung Creek. The existing railway level crossing will be removed, and the related crossing infrastructure will be repurposed as a railway maintenance access track.

This upgrade is coordinated with the construction of the Australian Inland Rail freight corridor. As the frequency, speed, length, and vehicle height of rail freight trains between Victoria and New South Wales increase, the existing road-rail level crossings will face higher safety and traffic capacity requirements. The new bridge will allow road vehicles to pass over the railway, reducing the need for road vehicles to stop and wait when trains pass, while also providing clearance conditions for double-stacked container freight trains.

The environmental assessment report analyzes the potential impacts during construction and operation of the project, covering biodiversity, noise and vibration, road traffic, Aboriginal cultural heritage, land use, surface water, groundwater, and flood risk. Transport for New South Wales is seeking feedback from residents, landowners, and relevant stakeholders along the route. After the consultation period ends, public comments will be compiled and a response-to-comments report will be prepared before proceeding with subsequent approvals and detailed design.

The Harris Gates project and the Tichborne level crossing upgrade project near Parkes are part of the same jointly funded federal and state government investment program. The two levels of government have jointly allocated AUD 350 million (approximately RMB 1.57 billion) for the two road-rail grade separation works, with the Harris Gates project and the Tichborne project implemented separately. The environmental assessment and concept design for the Tichborne project are expected to be released for public comment in mid-2027.

This bulletin is compiled and reposted from information of global Internet and strategic partners, aiming to provide communication for readers. If there is any infringement or other issues, please inform us in time. We will make modifications or deletions accordingly. Unauthorized reproduction of this article is strictly prohibited. Email: news@wedoany.com