MicroSense, LLC, previously known as ADE Technologies, is comprised of two primary businesses – precision capacitive position sensors, and vibrating sample magnetometers for state-of-the-art magnetic measurement. Until t......MicroSense, LLC, previously known as ADE Technologies, is comprised of two primary businesses – precision capacitive position sensors, and vibrating sample magnetometers for state-of-the-art magnetic measurement. Until the company was sold in November, 2009, we were a subsidiary of KLA-Tencor Corporation, a leading global supplier of semiconductor wafer defect inspection and metrology tools. MicroSense serves a host of industries including data storage, machine tool, and automotive. MicroSense provides customer value and security, through extensive business experience, financial strength, world-wide support, and technical leadership.Pioneering High Resolution Measurement with Capacitive Sensors Founded in 1967 by Robert C. Abbe, our capacitive sensor business was originally a part of ADE Corporation. ADE Corporation was renowned for its visionary and novel approaches to high resolution, non-contact measurement for demanding dimensional gaging applications. Over time, ADE grew to become the worlds leading supplier of tools for bare semiconductor wafer measurement. High resolution capacitive sensors for position and displacement measurement (also known as “cap gages”) became synonymous with “ADE” and our trademarked name, “MicroSense”.Based on patented capacitance sensing technology, we provide sensors used to make very precise, high bandwidth measurements of precision products such as hard disk drive motors, air bearing spindles, precision X-Y stages, optical disks, automotive parts and machine tools. Our capacitive displacement sensors provide the highest resolution in the industry, less than 0.05 nanometers, with virtually unlimited service life.Award Winning Tools for Magnetic Measurement The MicroSense magnetic metrology business was started as Digital Measurement Systems (DMS) over 25 years ago, and continued as a part of ADE Technologies since 1997.With our team of world class experts in magnetic property measurement, MicroSense is the leading supplier of high sensitivity Vibrating Sample Magnetometers for magnetic measurement. Our vibrating sample magnetometers are available in several models with a variety of capabilities, field ranges, resolutions and options. Our VSM systems are used for fundamental magnetic research at the most prestigious magnetics laboratories worldwide in both academic and commercial realms. A range of in-line, production magnetic metrology tools are also offered to meet the stringent demands of manufacturing todays rapidly advancing hard disk storage systems.

Micro-Vu was founded in 1959 in the San Fernando Valley in Southern California. The goal was to provide precision optical comparators at an affordable price. Small machine shops needed to improve the quality of their part......Micro-Vu was founded in 1959 in the San Fernando Valley in Southern California. The goal was to provide precision optical comparators at an affordable price. Small machine shops needed to improve the quality of their parts. Most measurement and inspection systems on the market were too expensive for the average small shop. Micro-Vus first product was a portable optical comparator. Micro-Vu designed a special lens system that offered bright images at a low cost. The comparator was an instant success. Over the years, Micro-Vu expanded its product line to fill the needs of customers developing larger and more accurate measuring machines. In the 1970s Micro-Vu offered a full line of optical comparators with advanced features like thru-the-lens surface illumination and integrated digital readouts (DROs) In 1980, Micro-Vu introduced the first metrology computer designed specifically for optical comparators. The Q16 and its predecessor the MD-1, brought functionality to optical comparators that previously had been available only on coordinate measuring machines. The 1980s saw many other innovations such as video comparators, edge detectors, video inspections systems and the latest technology - machine vision systems. In 1988, Micro-Vu moved to a Windsor, California, in the heart of Northern Californias wine country. The 40,000 square foot facility contains sophisticated design and manufacturing operations. In 1992, Micro-Vu introduced InSpec Metrology Software. This easy-to-use program provided measuring systems with more power than ever before. ASME Y14.5 geometric tolerancing and program storage were just the start of the large feature set. In 1994, Micro-Vu introduced the Qubix Vision. High accuracy, low cost, and ease of use made this system extremely popular. Other characteristics made the Qubix the most celebrated machine in its class. As the worldwide push for quality grows, customers continue to demand faster, more accurate, and more capable systems. In 1996, Micro-Vu introduced its fastest, most accurate system. The Quantum measuring system is capable of 28 inches per second with accuracy better than a micron. The Quantum features air bearings, granite ways and linear servo motors, and has raised the standard of measuring systems. Micro-Vu continues to provide more measuring solutions. Micro-Vu has developed a line of probe ready vision measuring machines as well as Window 2000 software to take measurement into the next century. >> Back to Top

Microwave Concepts, Inc. was formed in 1997, with a mission to become a premier supplier of state-of-the-art RF and Microwave components, modules and Sub-systems to the Space, Military, and Telecommunications communities.......Microwave Concepts, Inc. was formed in 1997, with a mission to become a premier supplier of state-of-the-art RF and Microwave components, modules and Sub-systems to the Space, Military, and Telecommunications communities. In 2003 Micro-Con merged with Micronetics, Inc. Since the merger, Micro-Con, operating as a division of Micronetics, has experienced rapid growth (4X in 4 Years). In 2010 we moved into a new 23,000 square foot facility in West Caldwell, NJ includes a 7,500 square foot state-of-the-art Class 10,000 clean room where we manufacture and test ALL of our products. We currently supply complex microwave assemblies to many of the major military Radar and EW Subcontractors. We also provide highly integrated front-ends for commercial airborne DBS applications. Engineering Our expert engineering staff utilizes a proven, systematic design process, along with a comprehensive suite of RF and Microwave CAD and simulation tools, to develop products that deliver the utmost in performance, quality, and value. In addition to the traditional materials and technologies used in MIC components and sub-assemblies, our staff possesses extensive design experience using advanced technologies such as highly integrated RFIC/MMIC devices, multi-layer Low Temperature Co-fired Ceramic (LTCC) substrates, and housings fabricated from state-of-the-art lightweight composite materials. Manufacturing The assembly and test of all Micro-Con microelectronic products is performed in a Class 10,000 clean room at our West Caldwell, NJ facility. Our manufacturing processes, along with a fully equipped end-to-end assembly facility, provide Micro-Con with a truly state-of-the-art in-house microelectronics assembly capability. Micro-Cons fully automated computer-controlled test stations enable us to perform all forms of environmental and electrical characterization and test in the most efficient and cost-effective manner. Quality Micro-Con is certified to ISO 9001:2000 (Micro-Cons registrar is TUV America). Our certificate registration number is 951 04 2826 and copies are available upon request. Micro-Cons Quality Management System includes a complete set of comprehensive quality assurance process controls and a company-wide commitment to continuous process improvement. All of our design, procurement, manufacturing, test, inspection, and general business processes are documented, measured, controlled, and continuously improved. The keystone of our corporate strategy is to cultivate an environment where the quality, reliability, and customer-value of our products are the focus of all our day-to-day business operations.

MIDAC Corporation was founded in 1978 with the goal of developing Fourier Transform Infrared (FTIR) spectrometers for a broad spectrum of the scientific community - from research to industry. In pursuing this goal, the co......MIDAC Corporation was founded in 1978 with the goal of developing Fourier Transform Infrared (FTIR) spectrometers for a broad spectrum of the scientific community - from research to industry. In pursuing this goal, the company has created a full line of FTIR products that are reliable, easy to use, and economical. The companys founder and President, Jerry Auth, brings a singular expertise in FTIR instrumentation to MIDAC. Jerrys work in the field began in 1965. Among other innovations, his efforts include pioneering the very first commercial FTIR instruments and the subsequent refining of specialized high resolution systems for the semiconductor industry. Recognizing the widespread need for economical and reliable instrumentation throughout the chemical industry, MIDAC introduced its first line of rugged, low-cost spectrometers in 1988. With innovations including monocoque construction, a compact and durable interferometer, and the use of a standard personal computer based data system, the MIDAC system was the first to make the analytical power of FTIR available to the average chemist. The current family of MIDAC products incorporates next-generation advancements in hardware and software specifically designed for high performance gas phase analysis. This includes a variety of application-specific solutions for industries including specialty gases, semiconductors, industrial hygiene, environmental, automotive, and general laboratory applications.

Midland Manufacturing, located 15 miles north of downtown Chicago, is America’s leading manufacturer of valves and level measurement devices for railroad tank cars, marine barges and ISO containers that transport a wide ......Midland Manufacturing, located 15 miles north of downtown Chicago, is America’s leading manufacturer of valves and level measurement devices for railroad tank cars, marine barges and ISO containers that transport a wide variety of general purpose and pressurized hazardous chemicals. We’ve proven our commitment for more than 50 years, consistently providing quality products, engineering support, technical data, trouble-shooting information and other value-added services to our customers. Our engineers work to solve the problems that are most important to you. Our industry leadership is built upon proven: Performance and Reliability: The Midland track record of proven performance and reliability in the most severe environments has built our industry leadership over more than 50 years. Midland valves are easy and economical to operate, providing years of reliable service and low cost of ownership. Safety: Midland products meet – in fact, they typically exceed – Association of American Railroads (AAR) regulations. Our active involvement in helping to define industry standards assists us in designing products that protect your workers, your equipment and the environment. Product Range: Midland offers the broadest range of products of any tank car fitting supplier. The extensive Midland product range means you need to work with only one supplier to evaluate, specify and receive a complete package that will meet your exacting requirements. Engineering: Midland Engineering and Technical Services Teams continuously innovate products that meet new customer requirements. Our on-site experts in materials, mechanical design and manufacturing routinely customize or develop new products specifically for unique applications of individual customers, often in anticipation of new industry requirements.

Midwest Control Products Corp (MCP) began operations in 1967 and operates factories in Bushnell, Illinois and Hidalgo, Mexico with Sales Offices in Bushnell, IL, USA, and Oxon, United Kingdom. Originally a tube fabricator......Midwest Control Products Corp (MCP) began operations in 1967 and operates factories in Bushnell, Illinois and Hidalgo, Mexico with Sales Offices in Bushnell, IL, USA, and Oxon, United Kingdom. Originally a tube fabricator, MCP has expanded its product line over the years to now include linkages (ball joints, clevises, clevis spring pins, spherical rod ends and yoke ends), flat bar fabrications, tube fabrications, upset forgings, wireforms, contract zinc electroplating and contract powder painting. Today, MCP ships to over 1,000 different OEMs (2000 different shipping locations) and distributors worldwide.

Midwest Cutting Tools, Inc. opened for business on June 14th 1990 and is a quality manufacturer of Carbide and High speed cutting tools, special-cutters, rotary files, with a complete CNC resharpening service down to 1/8"......Midwest Cutting Tools, Inc. opened for business on June 14th 1990 and is a quality manufacturer of Carbide and High speed cutting tools, special-cutters, rotary files, with a complete CNC resharpening service down to 1/8" dia. with a 1/32" radius. Special solid carbide tooling designed and engineered for specific requirements. Laser marking and tool coating services. Requirements for special tooling such as special shapes, diameters, cuts, flutes, shanks length, etc., or modifications of existing standard items, will be given prompt, expert attention.

Midwest Retail Services is a multi-line wholesale distributor of retail display fixtures. We serve: Retailers Retail Designers and Architects Retail Contractors and Professional Installers We represent display fixture man......Midwest Retail Services is a multi-line wholesale distributor of retail display fixtures. We serve: Retailers Retail Designers and Architects Retail Contractors and Professional Installers We represent display fixture manufacturers with successful histories serving the retail display industry. Our professional staff, along with over 20 manufacturing partners, is in tune with current retail designs and requirements to provide retailers with their display solutions. GOAL: Our company goal is creating the greatest value by providing the highest quality fixtures with the best service in the industry, establishing long term business relationships for present and future success. PRODUCTS: Steel gondola shelving and storage shelving by Madix, Streater, Lozier, and MEG Pharmacy shelving systems and Rx cabinets, wood and metal, by Uniweb, Madix, and Lozier Lighting accessories, highlight merchandise from above, behind, or at the shelf Showcases, standard and custom designs Heavy duty pallet rack and wide span systems Peg / Slatwall hooks and accessories Acrylic shelves and accessories Wire baskets and displayers Slatwall panels and fixtures In-store marketing and signage SERVICES: Installation Consolidation Proprietary inventory programs Store-in-a-box programs P.O.P. fixture programs Madix and Streater stocking factory service center

Mier Products is your best source for low voltage electrical metal enclosures and non-metallic enclosures, boxes, cabinets, or cans, cam locks, custom metal fabrication, and Drive-Alert driveway alarm systems. For 25 year......Mier Products is your best source for low voltage electrical metal enclosures and non-metallic enclosures, boxes, cabinets, or cans, cam locks, custom metal fabrication, and Drive-Alert driveway alarm systems. For 25 years Mier has been known in the security, electrical, and construction industries as a provider of high-quality metal enclosures, non-metallic enclosures, and Drive-Alert vehicle detection/asset protection systems. Mier offers a varied line of Low-Voltage Enclosures and Drive-Alert driveway alarm systems, and serves as a leading designer and fabricator of Custom Enclosures and parts. Enclosures: Many fabricators require large quantity runs for custom work, but Mier has the ability to design and produce small quantities economically. Using their "Design-A-Box" format, available on the website, custom enclosures and parts can be quickly designed, prototyped and produced. Mier is equally at home in producing larger volume and/or complex and intricate products, with an eye on keeping costs in line by controlling the fabricating processes. Mier also offers many accessories, E-coating, powder coating and screen printing as finishing touches. Our standard line of enclosures range from simple instrument and electrical junction boxes, to NEMA outdoor temperature controlled enclosures, and feature a multitude of paint colors in powder coat, ideally suited for the indoor or outdoor environment chosen. Drive-Alert Vehicle Detection and Asset Protection Systems: Mier is the pioneer in developing driveway alarm systems. As a frontrunner in development, Mier offers constant refinement and new techniques in the detection of vehicles and movement of assets. Miers Drive-Alerts include hard-wired and wireless models, with an array of accessories to address any installation demand. Drive-Alerts are ideal for residential, agricultural and commercial use, including drive-up window applications. Drive-Alert Vehicle Detection and Asset Protection Systems: Experience and caring drive the level of quality, innovation, and customer satisfaction at Mier Products. They are included with every order we ship! From helping you find exactly what you want, to the arrival of products at your door, you can count on our experience and our commitment to our customers. Whether you utilize our expertise built into our standard line of products, or use it to assist you in developing the perfect custom product for your application, you are certain to benefit from our knowledgeable staff and their sincere appreciation for your business. The management team at Mier brings years of experience to the table with a pledge of quality, service and competitive pricing.

MIFAB, established in 1982, is a manufacturer of commercial plumbing products. We are a family business that operates from 1321 West 119th Street, Chicago, Illinois, 60643. The Product line includes: Backwater valves BEEC......MIFAB, established in 1982, is a manufacturer of commercial plumbing products. We are a family business that operates from 1321 West 119th Street, Chicago, Illinois, 60643. The Product line includes: Backwater valves BEECO pressure reducing valves and backflow preventers Cleanouts C-PORT recycled rubber pipe supports Fixture carriers Floor, roof and area drains Floor Sinks Grease, oil, solids, automatic recovery, specialty and large oil-water separators Steel and plastic access doors Trap seal primers and distribution units Trench drains - steel, polypropylene, stainless steel and cast iron Wall, ground, floor, yard and hot/cold hydrants Water hammer arrestors MIFABs products have many features and benefits that have made them the choice of many specifying engineers and contractors. For example, a complete range of Stainless Steel drains and cleanouts that eliminates dishing, discoloration and corrosion normally associated with drain tops made of other materials are offered at the same cost as the industry standard, nickel bronze. MIFABs products are distributed through a network of over seventy manufacturers representatives throughout the United States, Canada, Middle East and other parts of the World.