Cable for Photovoltaic Power Generation Systems DC:1000V, TUV
Negotiable
China
Building 2, No.1148 Waiqingsong Highway, Anting Town, Jiading District, Shanghai
18116493402
18621662486
Online Contact
Favorite
Product Introduction

Cables for photovoltaic power generation systems are specially designed according to the unique environmental conditions in which photovoltaic power generation equipment operates. They are mainly suitable for the DC voltage side, for lead-out connections of power generation equipment, and for bus connections between modules, with a maximum voltage of DC1800V (conductor, non-grounded system, not based on the negative load circuit. In a single-phase grounded DC system, this value should be multiplied by a factor of 0.5) in photovoltaic power generation equipment systems.

Product Parameters

Ambient temperature

-40 ℃ ~ 90 ℃

Maximum operating temperature

120 ℃

Insulation resistance

≥ 10¹ 4Ω .cm at 20℃; ≥ 10¹ 1Ω .cm at 90℃;

Rated voltage

Uo/U = 600V/1000VAC, 1800VDC (conductor, conductor, ungrounded system) 1000V DC

Test voltage

6500V, 50Hz/5min

Bending radius

> 5D

Service life

25 years

Short circuit temperature

5S, 200 ℃

High temperature use does not melt, does not flow; through a single vertical burning test IEC 60332-2-1;

Cold resistance, heat resistance, UV resistance, ozone resistance

With high mechanical strength, acid and alkali resistance, heat and humidity resistance

Halogen-free, low smoke, flame retardant