Copy Milling Cutters -- Minimaster

Small diameter replaceable end milling system Seco Tools Minimaster is a versatile and well adapted system with holders in steel. A unique end milling system which can combine different solutions offering optimum accessab......Small diameter replaceable end milling system Seco Tools Minimaster is a versatile and well adapted system with holders in steel. A unique end milling system which can combine different solutions offering optimum accessablity in combination with maximum stablity and security. Seco Tools Minimaster for 3D milling is available in 2- and 3- flute versions, with 3-flute version it is possible to improve the productivity with higher feed rates, and with 2-flute version it is possible to minimize the risk of vibration. Seco Tools have continuously improved and extended the Minimaster range since its introduction in 1988. Today the Minimaster range is close to perfect, a unique end milling system which can combine different solutions due to the big range of inserts and shanks. The Minimaster system consists of a broad range of different shanks and inserts types. There are no other end milling systems, which are more flexible and varied as Seco Minimaster. There are more than 600 combinations of inserts and shanks for each diameter between 6 and 20 mm. VERSATILE AND COMPETITIVE Minimaster is a two piece design where you can combine shanks and inserts depending on the application, which makes Minimaster the most versatile end mill system on the market. This also means that with Minimaster you are able to find a solution for almost every application. Minimaster is a stable and rigid system and there is always a combination to minimize the overhang, and attain maximum stability. PRODUCT ADVANTAGES When using Minimaster you have a big advantage in the two piece design. When the insert is worn out you just put another insert in the shank and you are ready for action again. Minimaster is also an economical solution since you are not paying for more solid carbide than that which is in use. PRODUCT RANGE Minimaster is available from 6–20 mm in diameter. The inserts can be ordered in many different versions like under sized inserts for keyway, square shoulder inserts with sharp edges or corner radius. Center drilling, Chamfering 45–60° Or double chamfer, high feed inserts, Plunge milling and copy milling inserts in 90–120° ball nose versions.