Microprocessor Controlled Quill Feed

The Model 708 Microprocessor Controlled Quill Feed is factory installed (or factory retrofitted) on any Servo drill press for peck drilling and reaming cycles, or routine drilling of deep holes. Fully automates hole drill......The Model 708 Microprocessor Controlled Quill Feed is factory installed (or factory retrofitted) on any Servo drill press for peck drilling and reaming cycles, or routine drilling of deep holes. Fully automates hole drilling. Program and run all operations from the controller keyboard Programmable dwell, chip clearing height and variable peck depth Peck Steps: 0.001”-1.4” / 0.02mm-35.6mm Hole depth accuracy: +0.001” / 0.02mm Quill Travel: 1.4” / 35.6mm Maximum quill force: 35 Lbs. / 16 Kg Feed rates: 0.01-30 IPM / 0.250750mm/min Optional foot switch (Model 710)