1/1

Membrane bioreactor (MBR)

Name: Membrane bioreactor (MBR)
Availability: InStock

Negotiable

Shandong Zhaojin Motian Co., Ltd.

Located Region:

China

Address:

280 Guoda Road, Zhaoyuan City, Yantai City, Shandong Province

Biz Consulting:

+86 18306398285

E-mail:

romem@chinamotian.com

Online Contact

Favorite

A membrane bioreactor (MBR) is a new and efficient wastewater treatment and reuse process that integrates membrane separation technology with traditional biological wastewater treatment processes. In recent years, it has gained increasing attention in the international water treatment technology field. The membrane separation device is placed in the reactor to filter the sludge-containing wastewater in the biological reaction tank, which can retain activated sludge and large molecular organic substances, achieving sludge-water separation. This also significantly increases the concentration of activated sludge in the reactor, greatly improving the degradation efficiency of the biochemical reaction. The combination of membrane separation and biological treatment processes results in high-efficiency and high-quality effluent, making the membrane bioreactor one of the most advanced and promising wastewater treatment technologies in the world.

Product parameter 1

Project	Model	FPA-14-1523-PVDF*P	FPA-18-2000-PVDF*P	FPA-35-2000-PVDF*P
Membrane element parameters	Membrane material	PVDF	PVDF	PVDF
	Effective membrane area	14m²	18m²	35m²
	Inner and outer diameter of membrane wire	1.0/2.0mm	1.0/2.0mm	1.0/2.0mm
	Filter pore size	0.2μm	0.2μm	0.2μm
	Filtration mode	Siphon or negative pressure suction	Siphon or negative pressure suction	Siphon or negative pressure suction
	Pure water initial flux	80~100L/(m²·h)	80~100L/(m²·h)	80~100L/(m²·h)
	Turbidity of produced water	≤ 1NTU	≤ 1NTU	≤ 1NTU
	Produced Water Suspended Solids	≤5mg/L	≤5mg/L	≤5mg/L
	Operating pressure	-0.02 ~ -0.05MPa	-0.02 ~ -0.05MPa	-0.02 ~ -0.05MPa
	PH range of chemical cleaning	1 ~ 11	1 ~ 11	1 ~ 11
	Chemical cleaning available chlorine concentration	500~3000mg/L	500~3000mg/L	500~3000mg/L
	Usage temperature	5~40 ℃	5~40 ℃	5~40 ℃
Dimensions	Component Dimensions	568x45x1523	568x45x2000	785x45x2000

Note: The membrane area value shall be based on the center distance of side port.

Diaphragm parameter 1

Model	FPA-14-1523-PVDF*P	FPA-18-2000-PVDF*P	FPA-35-2000-PVDF*P
a	568	568	785
b	1523	2000	2000

1735539962546(1)

Product parameter 2

Project	Model	FPA-25-1500-II	FPA-35-2000-II
Membrane element parameters	Membrane material	PVDF	PVDF
	Effective membrane area	25m²	35m²
	Average membrane pore size	0.1μm	0.1μm
	Inner and outer diameter of membrane wire	1.0/2.0mm	1.0/2.0mm
	Water collecting pipe	ABS	ABS
	Average design flux	10~32L/(m²·h)	10~32L/(m²·h)
	Recommend working temperature	10~35 ℃	10~35 ℃
	Maximum tolerable PH range	2 ~ 12	2 ~ 12
	Recommend PH range	6 ~ 9	6 ~ 9
	Operating pressure	-0.02 ~-0.05MPa	-0.02 ~-0.05MPa
	Filtration mode	Siphon or negative pressure suction	Siphon or negative pressure suction
Dimensions	Component Dimensions	1250x32x1500	1250x32x2000