Australian Mines Re-identifies High-Grade Scandium Mineralized Intervals

2026-11-16 11:49
Favorite

en.Wedoany.com Reported - On November 13, re-identification of historical drillhole data from the Sconi Project in Queensland, Australia, delineated multiple shallow high-grade scandium mineralized intervals, including drillhole LKRC099, which returned 27 m at 883 g/t scandium from surface, including 21 m at 1,036 g/t scandium. Project owner Australian Mines re-evaluated historical exploration data within the two approved mining leases at Lucknow and Kokomo, identifying 546 drillholes with scandium assay grades at or above 100 g/t.

Of the 546 drillholes, 181 returned maximum scandium grades exceeding 300 g/t, including 112 exceeding 400 g/t and 58 exceeding 500 g/t. A further 172 drillholes contain continuous mineralized intervals of at least 10 m in which every sample within the interval assayed at or above 100 g/t scandium. The re-evaluation focused primarily on the existing nickel-cobalt exploration database; the original mine plan did not incorporate scandium grades into cut-off grade analysis, open-pit optimization or mine scheduling.

At the Lucknow deposit, drillhole LKRC099 returned 21 m at 1,036 g/t scandium from 6 m to 27 m downhole depth, including 10 m at 1,375 g/t scandium from 17 m to 27 m, with the last sample at the end of the hole grading 1,520 g/t. Drillhole LKRC205 returned 15 m at 499 g/t scandium from surface, including 9 m at 681 g/t scandium from 6 m to 15 m downhole depth.

At the Kokomo deposit, drillhole KK-805 returned 38 m at 427 g/t scandium from 15 m downhole depth, including 15 m at 555 g/t scandium from 38 m to 53 m. Drillhole KK-1013 returned 4 m at 634 g/t scandium from 21 m to 25 m; drillhole KK-1020 returned 12 m at 573 g/t scandium from 13 m to 25 m.

The historical drillhole database also shows that 100 drillholes ended in mineralization with scandium grades still exceeding 100 g/t, including 7 exceeding 300 g/t. The extent of scandium mineralization below these drillholes has not yet been verified by further drilling, and Australian Mines will consider supplementary drilling at the Lucknow and Kokomo deposits to test the continuity of high-grade scandium mineralized zones and their extension along strike and at depth.

Australian Mines will also evaluate the preparation of an updated mineral resource estimate with scandium as the primary target commodity. These results are based on re-analysis of historical drilling and assay data; no new drilling or sample assaying has been carried out, and the current focus remains on verifying the continuity, distribution scale and resource estimation parameters of the scandium mineralization.

This bulletin is compiled and reposted from information of global Internet and strategic partners, aiming to provide communication for readers. If there is any infringement or other issues, please inform us in time. We will make modifications or deletions accordingly. Unauthorized reproduction of this article is strictly prohibited. Email: news@wedoany.com