Unit 1 containment of Akkuyu NPP in Türkiye passes strength and leak-tightness tests
en.Wedoany.com Reported - On November 12, Rosatom released the results of the containment tests for Unit 1 of the Akkuyu Nuclear Power Plant in Mersin Province, Türkiye, confirming that the inner containment of the reactor building has completed an 8-day strength and leak-tightness test. The maximum test pressure reached 0.46 MPa, 15% above the design pressure of 0.4 MPa. The test results meet design requirements, and the unit will continue preparations for cold and hot functional testing of the reactor facility.

The test used a phased pressure increase method, gradually raising the air pressure inside the containment to 0.46 MPa. At the maximum test pressure, the force acting on each square meter of the containment surface was equivalent to the weight of approximately 47 tonnes. Test personnel continuously monitored structural stress as well as changes in shape and dimensions during pressurization, and then reduced the internal pressure in stages in accordance with the test procedure.
The leak-tightness test was conducted under both above-atmospheric and below-atmospheric pressure conditions, with 0.4 MPa being the design leak-tightness evaluation pressure. The test results confirmed that the containment meets the design requirements for structural strength and sealing performance under the corresponding pressure conditions, and is capable of withstanding the design internal overpressure.
The inner containment tested this time uses a prestressed reinforced concrete structure with an internal steel sealing liner. The strength test focused on verifying the load-bearing capacity of the concrete structure and prestressing system under load, while the leak-tightness test verified the steel liner and overall sealing performance.
Akkuyu Nuclear, the operating company of the Akkuyu NPP, is conducting phased inspections of Unit 1 equipment, building structures and safety systems. Following the completion of the containment test, the project will continue with cold and hot functional testing of the reactor facility.
Related Products


H-40.5/0.4~1.14kV New Energy Power Generation Dedicated High Voltage/Low Voltage Prefabricated Substation
XJ (Xiamen) Intelligent Power Equipment Co., Ltd.






KYN28-12/24 Indoor High-Voltage Metal-Clad Removable Switchgear
Shenzhen Zhaoyang Hui Technology Co., Ltd.


LVB Series 35-500kV Oil-immersed Inverted Current Transformer
Shandong Taikai Instrument Transformer Co., Ltd.








