4-68 series large flow centrifugal induced draft fan
Negotiable
China
No. 343, Central Section of Xima Avenue, Fengquan District, Xinxiang City, Henan Province
+86 15516602110
Online Contact
Favorite
Product Introduction

The 4-68 series centrifugal induced draft fan is suitable for indoor ventilation and air exchange in general factories and large buildings. It can be used to either intake or exhaust gases. The gases transported by the 4-68 fan should generally be air and other non-combustible, non-harmful to human bodies, and non-corrosive to steel materials, with a temperature not exceeding 80°C. The gas must not contain viscous substances, and the dust and hard particles must not exceed 150mg/m³. It features large flow, low noise, and is widely used in building ventilation, material ventilation and drying, air purification, industrial waste gas treatment, industrial dust collectors, air purification and emission in harmful work environments (such as paper-making production lines, electrolytic aluminum production lines, textile factories, etc.), as well as blower systems for boilers and brick kilns, gas transportation, and transportation of particles/powders/debris/fibers.

Product Features:

①Can output a large gas flow while meeting pressure requirements, with low noise.

②Motor uses high-efficiency, energy-saving motors from leading Chinese manufacturers (user-specified brand motors can also be installed), reliable quality, and lower energy consumption.

③V-belt drive allows the fan to operate at the most suitable speed. Simple installation, requiring no professional technical support.

④Airflow channels and impellers are optimized multiple times, achieving higher efficiency and energy savings compared to standard large flow fans.

⑤Made of high-quality carbon steel; stainless steel or other metal materials can be used upon user request.

⑥The impeller is annealed to completely eliminate the internal stress generated during welding, ensuring that the impeller will not undergo shape creepage or crack.

⑦All units are subjected to operational testing and vibration value checks after production, ensuring reliable operation.

⑧Simple installation, requiring no professional technical support.

Product Parameters

Fan series

4-68 series fan

Feature Selection

Ordinary

Corrosion protection

Wear resistance

High temperature

Explosion-proof

Remarks

Performance

Impeller diameter

280-1600mm

 

Spindle speed

≤ 3000rpm

 

Pressure

720-6531Pa

 

Flow

1966-194495㎥/h

 

Structure

Blade structure

Rearward, straight or wing type

 

Impeller support mode

Single suction cantilever impeller, double suction double support impeller

 

Lubrication method

Oil bath lubrication, grease lubrication, thin oil station

Can be specified

Bearing box cooling

Air cooling, water cooling, oil cooling

Can be specified

Transmission mode

A (motor direct connection),B,(belt intermediate drive) C (pulley drive),D (coupling drive),E (intake box belt drive)

Can be specified

Gas Properties

Gas temperature

Normal temperature

Objective requirements

Customer Requirements

≥ 250 ℃

Customer Requirements

 

Gas characteristics

Clean gas

Corrosive gas

Particulate matter

High temperature gas

Flammable, explosive

 

System Configuration

Motor brand

SIMO Motor, Lu'an Motor, Wannan Motor

SIMO Motor, Kaiyuan Motor, Xiangtan Motor

Lu'an Motor, Wannan Motor, Jiamusi

Hengzhou Mingde, Sailimeng, Wannan Motor

Nanyang explosion-proof, ABB motor, Siemens

Can be specified

Impeller

High quality carbon steel

Glass steel, stainless steel,

Rubber lining

Add wear-resistant layer or wear-resistant lining board, ceramic patch

High-temperature high-quality alloy steel

FRP, aluminum alloy

Can be specified

Air inlet

High quality carbon steel

Glass steel, stainless steel,

Rubber lining

High quality carbon steel

High quality carbon steel

High quality carbon steel

Can be specified

Case

High quality carbon steel

Glass steel, stainless steel,

Rubber lining

High quality carbon steel

High quality carbon steel

High quality carbon steel

Can be specified

Adjusting door

High quality carbon steel

Glass steel, stainless steel,

Rubber lining

High quality carbon steel

High quality carbon steel

High quality carbon steel

Can be specified

Spindle

High strength carbon steel,

bonded steel

High strength carbon steel,

bonded steel

High strength carbon steel,

bonded steel

High strength carbon steel,

bonded steel

High strength carbon steel,

bonded steel

Can be specified

Bearing

SKF, FAG, Wafangdian

SKF, FAG, Wafangdian

SKF, FAG, Wafangdian

SKF, FAG, Wafangdian

SKF, FAG, Wafangdian

Can be specified

Bearing box

Cast iron

 

Anchor bolt

GB799-1988

 

Optional Configuration

Integral bracket, protective cover, muffler, inlet and outlet compensator, inlet and outlet companion flange, regulating door, electric actuator, shock absorber, diaphragm coupling, fluid coupling, motor rain cover, temperature sensor, vibration Sensor, soft start device, frequency converter, special motor, system detection control device, high temperature fuel tank.