This water meter, through an integrated and innovative approach, adds measurement functions for water quality (including turbidity, residual chlorine, and pH value), water pressure, water temperature, etc., on the basis of water metering. It can be directly installed under pressure on the water supply network, and after water quality measurement, the tested water sample can automatically flow into the water supply pipeline. This product can perform real-time dynamic monitoring of domestic water and is suitable for application scenarios such as treated water from centralized water supply, terminal water in pipe networks, and secondary water supply. It provides real-time information for water supply enterprises in calibrating pipe network hydraulic models and acquiring key data, assisting enterprises in the refined construction of pipe networks.
Multi-parameter Water Quality Monitoring Instrument NWM-MW100
Product Introduction
Product Parameters
|
|
Pipe diameter |
DN100 |
|||
|
Host Length (L1) |
600 |
||||
|
Ultrasonic water meter length (L2) |
250 |
||||
|
Width (W) |
245 |
||||
|
High (H) |
580 |
||||
|
Connecting flange |
Flange outside diameter |
220 |
|||
|
Bolt hole center diameter |
180 |
||||
|
Connecting bolt |
8 × M16 |
||||
|
Measurement parameters |
Water pressure |
Water temperature |
Turbidity |
Residual chlorine |
PH |
|
Measurement range |
0 ~ 1MPA |
0.1~65 ℃ |
0.1 ~ 10NTU |
0.02~5MG/L |
5 to 12 |
|
Resolution |
0.001MPA |
0.1 ℃ |
0.01NTU |
0.01MG/L |
0.01 |
|
Repeatability |
0.02 |
0.3 ℃ |
3% |
0.03 |
0.1 |
|
Maximum allowable error (take the larger value) |
± 2% |
± 0.5 ℃ |
± 2% or ± 0.1NTU |
± 2% or ± 0.1MG/L |
± 0.1 |
|
Measuring principle |
Varistor method |
Thermistor method |
90° light scattering method |
Film-coated polarography |
Glass electrode method |
|
Ambient temperature |
5~40 ℃ |
||||
|
Ambient humidity |
Not more than 85% (non-condensing) |
||||
|
working flow |
Q₁~Q₃ |
||||
|
Working pressure |
No more than 1MPa |
||||
|
Working temperature |
0.1~30 ℃ |
||||
|
Environmental grade |
Class B |
||||
|
Electromagnetic environment level |
E1 level |
||||
|
Flow field sensitivity level |
Depending on the optional smart water meter |
||||
|
Pressure loss rating |
Depending on the optional smart water meter |
||||
|
Power supply voltage |
220±22VAC |
||||
|
Power frequency |
50±0.5Hz |
||||
|
Power |
4W |
||||
|
Remote communication |
4G-cat1 |
||||
|
Local Communications |
RS485/(CJT188-2018 protocol) |
||||
Other products from this supplier

Decentralized Water Metering Solution – Smart Card Meter

Decentralized Water Metering Solution – Wireless Remote Transmission

Centralized Water Metering Solution

Economical Water Metering Solution

Real-time Data Monitoring Instrument NWM-D110

Wireless Data Monitoring Instrument NWM-K130

Non-magnetic Pulse Emission Device NWM-HRI

Fully Electronic Water Metering Solution

LXLC Horizontal Woltman Water Meter Series DN50~500

Direct Drinking Water Meter

WPD Horizontal Woltman Water Meter Series DN40~300

WP5D Horizontal Woltman Water Meter Series DN50~500
Related Products
Industrial and Commercial Point-Type Gas Detector
CITIC Heavy Industries Water Conservancy and Power Generation Equipment
Coal-fired Boiler Startup Circulating Pump (Furnace Water Pump)
Economical Water Metering Solution
DG Series Multistage Boiler Feed Water Pump

