Technical Parameters

(1)Applicable Rope Diameter Range: ø6-30mm

(2)Monitoring Speed: 0-20m/s

(3)Passability: Unaffected by surface burrs, oil contamination, or deformation of the wire rope

(4)Distance Between Sensor and Wire Rope: 10–20mm

(5)Sensor Sensitivity: 1.5V/mT

(6)Electromagnetic Induction Signal-to-Noise Ratio: S/N > 85dB

(7)Visual Recognition Resolution: 1600×1200 PPI

(8)Visual Recognition Frame Rate: 40FPS

(9)System Operating Voltage: AC220V/127V ±10%/50Hz

(10)System Communication Network: Wireless or wired industrial Ethernet

(11)Docking Communication Protocol: TCP/IP, Modbus

(12)Operating Environment Temperature: -10℃ to 55℃; Humidity: ≤95% RH

(13)Dustproof & Waterproof Rating: IP54

(14)Continuous Operating Time: 24h × 7 days

(15)Sensor Service Life: 20,000 hours

Detection Rate

Severe Damage: Metal cross-sectional area loss rate 8%–10%, real-time detection rate 100%

Heavy Damage: Metal cross-sectional area loss rate 6%–8%, real-time detection rate 100%

Moderate Damage: Metal cross-sectional area loss rate 4%–6%, real-time detection rate 100%

Mild Damage: Metal cross-sectional area loss rate 2%–4%, real-time detection rate >99%

Minor Defect: Metal cross-sectional area loss rate = 2%, real-time detection rate >95%

Metal cross-sectional area loss rate >1%, real-time detection rate ≥80%

Repeatability

Severe Damage: 100%, damage detection waveform basically fits

Heavy Damage: 100%, damage detection waveform basically fits

Moderate Damage: >99%, damage detection waveform basically fits

Mild Damage: >95%, damage detection waveform basically fits

Minor Damage: >80%, damage detection waveform basically fits

Accuracy

Steel Wire Rope Metal Cross-Sectional Area (LMA) Loss Rate Detection Error: < ±1%

Twisted Distance Wire Break Number Error: <1 wire*

Steel Wire Rope Diameter Measurement Error: ±1%*

Steel Wire Rope Length Measurement Error: <0.2%

Damage Point Positioning Accuracy: ≥99%

Note: *Partial configuration includes AI machine vision recognition system