Waterproof sealing mastic tape is a kind of tape with good shape variable and durability. It can be used in conjunction with vinyl tape to provide excellent water proofing and sealing effect for cables and pipeline.
It is mainly composed of butyl rubber, which demonstrates excellent self-fusing, water proofing and insulation properties. It can provide quick and easy repair and sealing for targets that require waterproofing.
It can be used for insulation, waterproof, sealing and protection in telecommunication base stations, telecommunication cable connectors, etc., and the rated service temperature is -40 to 80°C.
Product Features
Excellent material bonding and water proofing performance, easy to install;
Ultralow water absorbability
Low failure rate and maintenance cost;
High tensile strength, excellent covering,
Quality material, with excellent insulation function;
Suitable for insulation filling and sealing of complex structures, with strong adhesion;
This product can completely isolate the influence of ozone, water and various soil chemical substances;
Especially suitable for cold weather, it can maintain elasticity and good sealing even when in large curvature.
Product Size
Product dimension: 600mm×63.6mm×3.2mm (Black)
Remark: Customization is available for request.
Application
Waterproofing and sealing of power cable accessories, such as cold shrink cable joints, waterproof joints, weld joints, etc.;
Waterprooting of antennas, feeders, splitters, towers and other facilities in the construction of 4G and 5G base stations;
Low-voltage insulation and oversheath repair, suitable for primary insulation recovery and insulation of motor leads up to 1kV;
Water proofing and sealing for the ground wire;
Water proofing and sealing protection of overhead line joints;
Used in other fields related to power and water proofing, such as high-speed rail, ships, etc.
Installation Instruction
Step 1. Clean the area to be applied with alcohol tissue, wipe off all the oil and dust, and wait for the alcohol to dry out;
Step 2. Take off the release liner above on one side of the putty, stretch the tape to maintain the tensile strength;
Step 3. Keep the sticky side of tape towards the contact surface, stretching the tape to 3/4 of its width, and then spirally wrap it with a 50% overlap;
Step 4. At the end of wrapping, pull and wrap the tape gently and press the tape end hard;
