GGD Low-Voltage Fixed Switchgear Assembly is used in the power distribution systems of power plants, substations, industrial and mining enterprises and other power users with AC 50Hz, rated operating voltage of 380V and rated operating current of 5000A, for the conversion, distribution and control of electric energy of power, lighting and distribution equipment. The product features high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, strong practicality, novel structure and high protection degree. It can be used as an upgraded replacement product for low-voltage switchgear assemblies.
GGD Low-Voltage Fixed Switchgear Assembly
Product Introduction
Product Parameters
1. Ambient air temperature not higher than +40℃, not lower than -5℃. The average temperature within 24h shall not be higher than +35℃.
2. For indoor installation and use, the altitude of the place of use shall not exceed 2000m.
3. Relative humidity of ambient air shall not exceed 50% at the highest temperature of +40℃, and higher relative humidity is allowed at lower temperatures. (For example, 90% at +20℃). The influence of occasional condensation that may occur due to temperature changes should be taken into account.
4. The inclination of the equipment to the vertical plane during installation shall not exceed 5°.
5. The equipment shall be installed in places without severe vibration and impact, and in places insufficient to cause corrosion of electrical components.
Other products from this supplier

SCB11, SCB13, SCB14, SCB18 Series Dry-Type Transformers

S11, S13, S20, S22-M Series Oil-Immersed Transformers

S11, S13, S20, S22-M.RL Series Oil-Immersed Transformers

S(B)H15, S(B)H21, S(B)H25 Series Amorphous Alloy Distribution Transformers

D11, D13, D20 Series Single-Phase Oil-Immersed Transformers

GCK Low-Voltage Withdrawable Switchgear

GGJ Low-Voltage Reactive Power Intelligent Compensation Device

GCS Type Low-Voltage Withdrawable Switchgear

MNS Type Low-Voltage Withdrawable Switchgear

KYN28A-12 Indoor AC Metal-Clad Mid-Mounted Switchgear

KYN61-40.5(Z) Armored Removable AC Metal-Enclosed Switchgear

DFW High-Voltage Cable Branch Box
Related Products
KYN28i-12 intelligent indoor high-voltage alternating current metal-enclosed armored switchgear
TE/LE-series intensive bus duct
KYN28A-12 Metal Armored Removable Switchgear
G.652.D Wavelength-extended Non-dispersion Shifted Single-mode Optical Fiber
Vacuum Interrupter & Solid-Sealed Pole
Outdoor Pole-Mounted SF6 Gas-Insulated Load Break Switch
FL(R)N36-12 Load Switch
Silicone Rubber Dry-Type Cable Termination
Low-Voltage Integrated Distribution Box
Single-Phase Automatic Voltage Regulator(AVR)
ZF16-1100(L)/Y8000-63 Sulfur Hexafluoride Gas Insulated Metal Enclosed Switchgear
