Single-Boom Computerized Rock Drilling Jumbo WD100E

Negotiable
China
No. 18-1, Panpan Road, Changsha Economic and Technological Development Zone, Changsha County, Changsha City, Hunan Province
19918865108
Online Contact
Favorite

Product Introduction

Strong adaptability to construction sections

China's first curved-boom boom structure, with a large working range and a compact body, can meet the construction needs of most section types in tunnel and cavern construction; especially for pumped storage power stations and hydropower station tunnel construction, it can cover anchor bolt and excavation operations for all tunnel section types

Strong adaptability to working conditions

It can adapt to both slopes and turning sections, especially for hydropower tunnel group operations, and can meet passability requirements for all turning sections

Strong adaptability to construction methods

The curved boom can operate below the horizontal plane and can meet invert excavation requirements

Convenient anchor bolt construction

It can meet the construction operations for system anchor bolts, lock-off anchor bolts, and advance small conduit holes in tunnels and caverns; an optional rod extension device is available to meet anchor bolt hole operations with a hole depth of 12 m

Strong adaptability for personnel

Remote control operation is simple and easy to learn, allowing rock drill operators to get started quickly, and enabling close observation of drilling conditions

Product Parameters

Overall Machine Parameters
Dimensions mm 8310×2480×3400
Weight kg 15600
Travel Speed km/h 15
Maximum Longitudinal Gradeability % 26
Maximum Travel Transverse Slope ° 5
Engine Power kW 66
Ground Clearance mm 300
Power Mode - Diesel travel, electric operation

◎ Working Range (Width × Height)
Maximum (Tunneling) mm 14000×11000
Minimum (Tunneling) mm 6000×6000
Maximum (Anchor Bolt Support) mm 22000×14000

◎ Uniroc Rock Drill
Model - U1838ME U2238ME (Optional)
Drilling Diameter mm 38-89 38-89
Rated Impact Power kW 18 22
Maximum Impact Pressure bar 230 250
Maximum Rotation Torque Nm 1000 1000

◎ Air Supply System
Working Flow Rate m³/min 0.8
Working Pressure bar 8
Air Compressor Power kW 5.5

◎ Water Supply System
Working Flow Rate m³/h 5
Working Pressure MPa 0.8~1.5
Water Pump Power kW 3

◎ Electrical System
Total Installed Power kW 63.5
Working Voltage/Frequency V / Hz 380 / 50
Cable Length m 80

◎ Feed Beam
Model - Type A Standard Type B Optional Type C Optional
Drill Rod Length mm 4915 5525 4305
Feed Beam Length mm 6506 7136 5872
Maximum Drilling Depth mm 4640 5250

4030