Turn-Mill Centers TNX65/42

Manufacturing cost-effectively at all times - the modular concept of the TNX65/42 makes it possible. Whether with two, three or even four tool carriers that can all be optionally equipped with a Y-axis, the TNX65/42 adapt......Manufacturing cost-effectively at all times - the modular concept of the TNX65/42 makes it possible. Whether with two, three or even four tool carriers that can all be optionally equipped with a Y-axis, the TNX65/42 adapts to your requirements and manufacturing needs. 1 / 1Simultaneous and independent machining with up to 4 tool carriers Quadruple functional symmetry, i.e. four identical turrets with an independent Y axis (option), having the same spaces for tool change and identical number of tool stations Free allocation of the tool carriers to the two pindles Optimal cutting power by powerful drives on main and counter spindle Powerful tool drives on all turrets for perfect complete machining Precise tool holder positioning requires no alignment and no adjustment Large-sized and freely accessible working area The modular building block system1 / 4The Turn-Mill Center TRAUB TNX65/42 allows an increase of the productivity just as required. Depending on the selected configuration, the machine designed as modular system is equipped with two, three or four tool turrets. Thus, a machining with up to 80 fixed or driven tools is possible without any magazine.The symmetrical machine design, the identical main and counter spindle and the powerful drives guarantee optimum cutting results. The machine processes geometrically complex series parts with a diameter of up to 65 mm and a length of up to 300 mm. Another highlight are the tool carriers that are traversable in X and Z direction and optionally in Y direction. They allow simultaneous high-productive cutting with four Y-axes at main and counter spindle in combination with the powerful tool drives (5.5 kW / 17.5 Nm / 6.000 min-1). View into the work area1 / 5 The four tool carriers can be used arbitrarily at main spindle and counter spindle This versatile machine is designed for a broad range of application for bar diameters of up to 65 mm. The innovative kinematics allows processing workpieces with a length of up to approx. 300 mm simultaneously and independently at each one of the two spindles using up to three tools. This free assignment of the tool carriers guarantees the highest productivity. Thus, the new TNX65/42 reaches cycle times that have been known until now only with multi-spindle automatics.The TNX65/42 is controlled using the TRAUB control unit TX8i-s. The software of the TX8i-s was developed completely in-house at TRAUB such as all versions developed in more than 25 years. The advantage is obvious: We do not have to use standardized software products but can design them optimally adapted to the requirements of the customer or application and these needs can be considered in the development. Expectedly, the new TX8i-s is compatible with all previous TRAUB control units so that existing programs can still be used.