US SpaceX Completes First Return and Capture of Starship Upper Stage
en.Wedoany.com Reported - On November 14, US Space Exploration Technologies Corp. (SpaceX) successfully captured the Starship upper stage Ship 42, which had completed orbital flight, for the first time using the launch tower's mechanical arms at Starbase in Texas, accomplishing the core recovery objective of Starship's 15th integrated flight test. During the approximately 22.5-hour flight, the spacecraft orbited Earth 14 times and previously deployed 26 third-generation Starlink satellites. This marked the first return and capture of a Starship upper stage after orbital flight, while the Super Heavy booster did not complete synchronized recovery.

The Starship system consists of an approximately 70-meter-long Super Heavy booster and an approximately 50-meter-long spacecraft upper stage, with an overall height of about 124 meters. Both stages are designed for reusability, with the goal of completing launch, orbital transport, return, and reflight.
Starship's 15th integrated flight test lifted off from the Starbase launch site on November 13, using the combination of Super Heavy booster 22 and Starship spacecraft 42. After the two stages completed hot-staging, the spacecraft continued into low Earth orbit using its own Raptor engines, reaching an orbital altitude of approximately 275 kilometers. The spacecraft then began deploying its 26 third-generation Starlink satellites, with the release process lasting approximately 42 minutes. After satellite deployment was completed, the spacecraft continued orbiting Earth to accumulate data for the subsequent return and thermal protection system tests.
On November 14, after completing orbital flight, the spacecraft initiated its deorbit burn and entered the atmospheric reentry phase. The spacecraft adjusted its attitude and descent trajectory through aerodynamic control and engine burns, ultimately returning to Starbase. As it approached the launch tower, the spacecraft adjusted to a vertical attitude and was captured by the mechanical arms on both sides of the tower, with the entire recovery process not requiring a traditional landing platform or offshore recovery vessel.
This capture validated the complete process of the Starship upper stage from orbital flight and atmospheric reentry to launch site recovery. Unlike the previous mechanical arm captures of the Super Heavy booster, the upper stage must withstand the high-temperature reentry environment at orbital velocities and complete attitude control, deceleration, and precise positioning during the return process, imposing higher technical requirements. SpaceX had previously successfully captured the Super Heavy booster three times, but this was the first time such an operation was performed on a Starship spacecraft upper stage.
This mission did not achieve simultaneous recovery of both rocket stages. The Super Heavy booster executed its return burn after stage separation, but the return burn ended early due to insufficient propellant margin. The flight control system then triggered an automatic abort procedure, guiding the booster to a designated area in the Gulf of Mexico, where flight was ultimately terminated near the sea surface. SpaceX stated that it is investigating the cause of the insufficient propellant margin. The Raptor engines used on this booster also completed all braking engine burns for the first time in this vehicle type's mission and achieved controlled deceleration above the sea surface.
Related Products

"Shunyi 1600" Deep-submerging Bottom-sitting Multi-functional Wind Power Engineering Vessel
Zhengli Offshore Engineering Co., Ltd.



ZY(J)7(M) Sealed Type Electro-Hydraulic Turnout Machine
TAIYUAN CR JINGFENG EQUIPMENT TECHNOLOGY CO., LTD.
3m intelligent buoy combining navigation safety and real-time marine monitoring integrated navigation and marine monitoring system for real-time maritime data
Chengdu Dixin Technology Co., Ltd.
Industrial and Commercial Point-Type Gas Detector
Jinan Benan Technology Development Co., Ltd.

CLW5180TXSD6 Dongfeng Tianjin Washing and Sweeping Truck
ChengLi Special Automobile Co., Ltd.


Wheel and Track Technology Business
Beijing Research & Design Institute of Rubber Industry Co., Ltd.








