China Railway completes jacking construction of box culvert bridges under Beijing-Chengde Railway for Wenchaojian River
en.Wedoany.com Reported - On November 12, the jacking construction of two prefabricated box culvert bridges was completed for the Zhangxin Station box culvert bridge project where the Wenchaojian River passes under the Beijing-Chengde Railway in Beijing. The project is undertaken by China Railway Sixth Group under China Railway. The box culvert bridges have a total width of approximately 127 meters and a clear height of 8.6 meters, with 8 openings in total. The two single-span box culvert bridges are each 63.5 meters wide, with a single-span weight of approximately 21,000 tonnes. During construction, the 7 electrified tracks of the Beijing-Chengde Railway remained in normal operation, with about 70 trains passing daily.

The project adopted a split prefabricated box culvert and horizontal jacking construction scheme. The two four-cell box culvert bridges were prefabricated in advance in the foundation pit on the west side of the railway, and then pushed from west to east into position beneath the railway using 84 jacks operating in 4 groups. The single jacking distance for each of the two box culverts exceeded 80 meters. The construction adopted a method of excavation and jacking in parallel, with soil excavation at the front and bridge advancement at the rear carried out simultaneously to control the exposure time of the soil beneath the railway.
To address the challenges of thrust and directional control arising from the long-distance jacking of ten-thousand-tonne box culverts, the construction team adopted relay station segmented jacking technology, installing a jacking system behind the bridge body to divide the continuous jacking process into multiple short-distance operation sections, controlling the bridge position through relay advancement and segmented deviation correction. Ultimately, the two box culverts were positioned with millimeter-level alignment accuracy.
Railway operational safety was another key focus of this construction. The project passes beneath the 7 electrified railway tracks at Zhangxin Station on the Beijing-Chengde Railway. Before construction, a track reinforcement system was established using rail clamping, I-beams, longitudinal and transverse beams, as well as 1.25-meter-diameter subgrade protection piles, support piles and anti-lateral displacement piles. Within the approximately 130-meter railway section, 175 transverse beams were installed, each with 14 connection points to the longitudinal beams. During construction, railway maintenance personnel conducted inspections according to train operating intervals, promptly checking track connections and reinforcement facilities after trains passed to ensure that railway transportation was not affected by the jacking operations.
The project also applied the Beidou 3D monitoring platform for underpass bridge jacking independently developed by China Railway Sixth Group. Beidou positioning devices and related sensors were installed at key positions on the box culvert bridges, and combined with Global Navigation Satellite System base stations, real-time monitoring of direction, displacement and elevation changes during the bridge jacking process was achieved. The platform integrates Internet of Things, big data, Building Information Modeling and Geographic Information System technologies. Monitoring data is transmitted back to the backend in real time, and automatic warnings are triggered when position deviations occur. This platform was applied for the first time in Beijing's water conservancy engineering construction, reducing the frequency of traditional manual measurements and improving monitoring efficiency for long-distance jacking construction.
The Wenchaojian River project is an important component of the flood control system of Beijing's sub-center, with a total length of approximately 13 kilometers. It connects the Wenyu River and the Chaobai River and undertakes the task of diverting excess floodwater from the Wenyu River during flood seasons. This box culvert bridge crossing project is a key node where the river channel crosses the existing railway. The bridge body accommodates flood discharge passages while bearing railway loads. The overall project is constructed to the once-in-a-century flood control standard and is scheduled to be ready for water flow before the 2027 flood season, with full completion by the end of 2027.
Related Products

Acoustic Mineral Fiber Ceiling Tile 595x595x12mm
Shanxi Pano Trading Co., Ltd
RISITA explosion-proof air conditioning
Guangdong RISITA Air Conditioning Equipment Co.,Ltd.
300mm Segment Type Countdown Traffic Light (Core Type)
Yangzhou FAMA Intelligent Equipment Co., Ltd.

Ultra-pure Ferritic Stainless Steel Products
Gansu JISCO Group Hongxing Iron and Steel Co., Ltd.
YHTank8400N Solvent-Free Liquid Epoxy Coating
JIANGSU YUNHU NEW MATERIAL TECHNOLOGY CO., LTD.

145kV Porcelain Column Type Sulfur Hexafluoride Circuit Breaker
TBEA ZONFA Shanghai High Voltage Switchgear Co., Ltd.


Aoxuan Intelligent Precision Air Conditioning Unit
SHANGHAI AOXUAN PURIFICATION TECHNOLOGY CO., LTD.









