A two-component, high-solids, thick-film, modified polyamide-cured low surface tolerance epoxy paint.

Main Performance

It still provides excellent adhesion and rust prevention on surfaces with low surface preparation; it has moisture tolerance and can be applied as long as there is no visible water on the surface; it offers very good corrosion protection when exposed to fresh water and seawater; it will chalk when exposed to sunlight.

Design Purpose

Suitable for steel structures in various atmospheric environments as a primer/intermediate coat, such as offshore structures, chemical or petrochemical plants, industrial buildings, power plants, bridges, etc. It is particularly suitable for steel structures that are difficult to blast clean or areas where the surface still retains moisture after high-pressure water jet cleaning. It can be used alone or in combination with other primers and topcoats.

Physical Parameters

Color: Iron red or gray

Gloss: Matte

Volume solids content: 80±2%

Mixed specific gravity: Approx. 1.65kg/L

Actual coverage rate VOC content: Consider a certain loss factor ≤200g/L

Typical Film Thickness and Theoretical Coverage Rate: