This tape is a kind of waterproof, sealing and insulating composite mastics with strong adhesion and shape variable. It is composed of ethylene-propylene rubber and butyl rubber. It has great self-adhesiveness, and excellent water proofing and insulation function.
Easy to install, non-corrosive to copper, aluminum and cable sheathing materials.
Rated service temperature is 90℃, short time overload temperature over 130℃, it can be used for insulation, waterproof, sealing and protection at power cable accessories, communication base stations, communication cable connectors
Product Features
Excellent adhesive and waterproof function, easy to install;
Excellent weather resistance and sealing function;
Excellent adhesiveness even under a temperature of -30°C;
Superior low and high temperature stability, cater for installation under various climate;
Sound abrasion resistance and tensile elongation performance, excel among peers;
Product size
Product dimension: 3000mm×50mm×1.65mm (Black)
Remark: Customization is available for request.
Application
Used for waterproof and sealing of power cable accessories, such as cold shrink cable joints, waterproof joints, weld joints etc.;
Used for waterproofing of antennas, feeders, splitters, towers and other facilities in the construction of 4G and 5G base stations;
Used for low-voltage insulation and outer sheath repair, suitable for primary insulation recovery and insulation of motor leads up to 1kV;
Waterproof and sealing for the ground wire;
Waterproof and sealing protection of overhead line joints;
Used in other fields related to power and waterproofing, such as high-speed rail, ships, etc.
Installation Instruction
Step 1. Clean the area to be applied with alcohol tissue, wipe off all the oil and dust, and wait for the alcohol to dry out;
Step 2. Take off the release liner above on one side of the putty, stretch the tape to maintain the tensile strength;
Step 3. Keep the sticky side of tape towards the contact surface, stretching the tape to 3/4 of its width, and then spirally wrap it with a ... 50% overlap.;
Step 4. At the end of wrapping, pull and wrap the tape gently and press the tape end hard;
