0.6/1(1.2)kV cross-linked polyethylene insulated power cable
Operating characteristics:
① The maximum long-term allowable operating temperature of the cable conductor is 90℃;
② During a short circuit (lasting no more than 5s), the maximum temperature of the cable conductor shall not exceed 250℃;
③ The ambient temperature during cable installation should not be lower than 0℃. The minimum bending radius of the cable during installation is shown in the table below.
|
Product model and name |
|
|
Model |
Name |
|
YJ(L)V |
XLPE insulated PVC sheathed power cable |
|
YJ(L)Y |
XLPE insulated PE sheathed power cable |
|
YJ(L)V22 |
XLPE insulated steel tape armored PVC sheathed power cable |
|
YJ(L)V23 |
XLPE insulated steel tape armored PE sheathed power cable |
|
YJ(L)V32 |
XLPE insulated fine steel wire armored PVC sheathed power cable |
|
YJ(L)V33 |
XLPE insulated fine steel wire armored PE sheathed power cable |
|
YJ(L)V62 |
XLPE insulated non-magnetic metal tape armored PVC sheathed power cable |
|
YJ(L)V72 |
XLPE insulated non-magnetic wire armored PVC sheathed power cable |
|
WDZ-YJY |
XLPE insulated low-smoke halogen-free flame retardant polyolefin sheathed power cable |
|
WDZ-YJY23 |
XLPE insulated steel tape armored halogen-free low smoke flame retardant polyolefin sheathed power cable |
Note:
“① PVC sheathed power cables in the above models, the company can also produce flame retardant, fire-resistant and termite-proof power cables. Add “ZA-”, “ZB-” or “ZC-” before the above models for flame-retardant power cables; add “N-” before the above models for fire-resistant power cables; add “-FY” after the above models for termite-proof power cables”.”
“② According to user needs, our company can also produce the above various specifications of 1kV XLPE insulated low-smoke low-halogen flame-retardant sheathed power cables and low-smoke halogen-free flame-retardant polyolefin sheathed power cables, as well as various fire-resistant cables. "
|
Project |
Single core cable |
Multi-core cable |
||
|
No Armored |
Armored |
No Armored |
Armored |
|
|
Minimum bending radius of cable at installation |
20 D |
15 D |
15 D |
12 D |
|
Minimum bending radius of the cable near the connection box and the terminal (but the bending should be carefully controlled, such as using a molded guide plate) |
15 D |
12 D |
12 D |
10 D |
|
Note: D is the outer diameter of the cable. |
||||
