Lower Ring Beam of Cooling Tower No. 2 at Weihai Thermal Power Project in Shandong, China Completed

en.Wedoany.com Reported - On June 4, the concrete pouring of the lower ring beam of Cooling Tower No. 2 at the Weihai Combined Heat and Power (CHP) EPC project in Shandong, undertaken by China Energy Engineering Group Tianjin Electric Power Construction Co., Ltd., was completed, marking the official start of the tower wall construction phase for Cooling Tower No. 2 and the synchronized progress of both towers in the project.

The lower ring beam of Cooling Tower No. 2 has a radius of 52.659 meters, a wall thickness ranging from 901 mm to 1050 mm, a section height of 1.3 meters, and a pouring height of approximately 10.82 meters. The construction employed a method of layered and segmented concrete placement using two pump trucks starting from the same point in opposite directions, with a total of 490 cubic meters of concrete poured. Before the pouring, the project team completed specialized technical briefings and safety measures, refined construction key points, and identified potential hazards. During the construction process, management personnel maintained full-time on-site supervision, strictly controlled each procedure, and ensured continuous compliance with milestone targets, laying the foundation for the subsequent synchronized tower wall work on both cooling towers.

Located in the eastern part of Minshan Town, Lingang District, Weihai City, Shandong Province, the project involves the construction of two new 660 MW ultra-supercritical coal-fired units, along with the simultaneous installation of high-efficiency dust removal, flue gas desulfurization, and denitrification facilities. Once operational, the project will effectively enhance Weihai's power supply capacity, meet the growing electricity demand of the city, and provide a stable heat source for urban heating through efficient combined heat and power generation, thereby improving overall energy utilization efficiency.

This article is compiled by Wedoany. All AI citations must indicate the source as "Wedoany". If there is any infringement or other issues, please notify us promptly, and we will modify or delete it accordingly. Email: news@wedoany.com