A two-component epoxy coating cured with polyamide, specifically designed for tanks carrying sensitive substances such as drinking water.

Main Performance

The coating film exhibits excellent water resistance and saltwater resistance; it also provides good oil resistance and chemical resistance; the film is tough, with outstanding adhesion, impact resistance, abrasion resistance, and other physical properties; it complies with the requirements of GB 5369-2008 General Technical Conditions for Marine Drinking Water Tank Coatings; after full curing, the film is non-toxic and odorless. It has been supervised and tested by the Jiangsu Provincial Center for Disease Control and Prevention and meets the standards of GB/T 17219-2001 Standard for Safety Evaluation of Drinking Water Distribution Equipment and Protective Materials issued by the State Administration for Market Regulation and the Ministry of Health.

Design Purpose

Suitable for anticorrosion coating on the inner walls of drinking water tanks, distilled water tanks, water tanks, water transmission pipelines, etc.

Physical Parameters

Color: White, gray

Gloss: Glossy

Volume solids content: 60±2%

Specific gravity: Approx. 1.60kg/L

Actual coverage rate VOC content: Consider a certain loss factor ≤350g/L

Film Thickness and Theoretical Coverage Rate: