DDW500/180-HORIZONTAL DIRECTIONAL DRILL

Negotiable
China
No.6, Huoxing Fifth Street, Huo County Development Area, Tongzhou District, Beijing, China
+86 158 0128 6508
Online Contact
Favorite
Product Introduction

Separated operating room and power pack gives the operator enough room to control and maintenance of the unit.

Full length maintenance walk way with fence makes it easy and safe for checking all parts above the chassis.

Container structure, home use air conditioning, electronic dual joystick with clear buttons, one-piece big glass window gives the operator a complete easy view and control on the working rig in the operating room.

Drill condition data and rig movement can be easily seen from the monitoring screen in the room so the operator can get the information for all only within his chair.

Dual diesel engine power pack provide long lasting and consistent power for carriage and rotation at any difficult drill time.

Individual cooling system let the fluid always at the decent working temperature so the operator no need to worry about the working ground is desert or tropical.

Movable clamping, level adjusting pipe loader, onboard lifting crane, all these equipment make sure the rig can give a safe and efficient pipe handling work on the rig.

Steel track chassis equipped with individual engine for rig movement so the machine can be transit by itself and no need other traction for the short distance running.

All connection by the quick couplings make the set up work easy and precise.

Broad anchoring board and rear supporting beam connected by the wire rope to give a stable anchoring during the maximum force pulling.

Born for the big job, the powerful drill head gives unmatched power during the rotation and thrust or pulling of the pipe to make the operator always confidence of what he is doing.

Dual rod supporter on the anti-mud slippery beam let the rod even and stable before threaded into the shaft.

Product Parameters
Drilling rig  
Length/Width/Height 19400*3260*3400 mm
Entry angle 8-12°
Unit weight 52 ton
Operator room  
Length/Width/Height 6000*2500*2200 mm @ 2.0 ton
Environment control Full closed, climate control with A/C
Control system Electronic self-diagnostic PLC
Visualization 10" inch colour screen monitor * 3
Operation controls Joysticks and levers
Power pack  
Length/Width/Height 6000*2200*2800 mm @ 6.0 ton
Engine Cummins
Rated power 410*2=820 KW
Rated speed 1900 rpm
Fuel tank capacity 1000 L
Hydraulic system  
Max pressure (rotary & carriage) 40 Mpa
Max pressure (control sys.) 30 Mpa
Hydraulic tank capacity 1000 L
Undercarriage  
Structure Box welded frame, self-propelled on track crawler
Travel speed 0-2.0 km/h, forward & reverse
Track Steel type with rubber pad
Track plate width 550 mm
Rear stabilizer vertical
Mast  
Fluid channel Yes
Transmission type Rack & pinion
Rod support Yes
Hose carrier Full length of chain type
Setup mode Cylinder
Mast stand Yes
Rotary drive  
Rotary torque 180000 N.M
Rotary speed 90 r/min
Transmission Gear box
Rotary shaft 6 5/8 FH
Carriage  
Maximum thrust/pullback force 5000 KN
Max travel speed 36 m/min
Max travel distance 12 m
Stake down  
Anchoring type Manual anchoring
Wrench assembly  
Type Triple jaw
Sliding on the mast Yes
Max breakout torque 360000 Nm
Max makeup force 3700 KN
Clamp range 27-254 mm
Pipe loader  
Type One rod type pipe loader
Lighting  
Lights Room, Wrench, Rotary
Crane  
Lifting capacity 5 ton
Control Outdoors
Drill pipe  
Type Φ 168*9600 mm
Thread 6 5/8 FH
Tools  
Back reamer Diameter 530, 630, 730, 820, 920, 1050, 1250, 1450mm

※ Specifications for reference only subject to change prior to notice. ※