en.Wedoany.com Reported - NOVOSENSE Microelectronics will showcase its latest integrated circuit products in sensing, signal chain, and power management at PCIM 2026, held from June 9 to 11, 2026 at the Nuremberg Exhibition Center in Germany. The company will also introduce new product launches and live demonstrations covering applications such as functional safety and isolation in automotive power conversion, motor control and load driving in white goods and industrial control, and gate driving and current sensing in AI data center power systems.
In automotive applications, exhibits include devices addressing the high-voltage power conversion needs of electric vehicles. The isolated gate driver NSI6911F, suitable for SiC and IGBT power stages, is TÜV Rheinland certified and meets ISO 26262 ASIL D requirements, with a peak drive capability of 19A, common-mode transient immunity (CMTI) of ±150kV/μs, and an integrated 12-bit isolated ADC, targeting applications such as traction inverters and DC-DC converters. The enhanced isolated Σ-Δ modulator NSI1306 is used for shunt-based isolated current sensing in on-board chargers (OBC). The third-generation automotive-grade NSI83xx series capacitive digital isolators feature EOS recovery capability and low power supply noise sensitivity, simplifying system-level EMI suppression and ensuring signal integrity in high-frequency SiC switching environments such as BMS and traction inverters. The high-output-current operational amplifier NSOPA240x delivers a continuous output current of 400mA and a slew rate of 5.5V/μs, used for low-distortion resolver excitation in traction motor control.
For white goods and industrial control, exhibits include devices for condition feedback sensing, efficient motor control, and load driving. The NSPGD1M integrated gauge pressure sensor, packaged in DIP8 with an air nozzle, offers ±2.5% accuracy over the full temperature range for non-contact liquid level detection. The NST1002 single-bus digital temperature sensor achieves ±0.5°C accuracy with a resolution of 0.0078°C, suitable for temperature sensing in home appliances, batteries, and industrial applications. The NSM2311 low-impedance integrated current sensor is used for isolated current measurement in industrial drives, photovoltaic inverters, power supplies, and PDUs. The H-bridge motor drivers NSD7305, NSD7308, and NSD7309 target brushed DC motors and actuator loads, featuring low on-resistance, current regulation, EMI optimization, and protection diagnostics. The smart low-side drivers NSD5614N and NSD5624 are used for relays, valves, solenoids, PLC I/O, and unipolar stepper motor loads, supporting PWM or SPI control, output paralleling, integrated clamping, and fault diagnostics.
Addressing the high energy demands of AI data center power systems, exhibits include gate driving and current sensing devices for high-density power conversion. The isolated dual-channel gate driver NSI6602V features a peak source current of 6A and a peak sink current of 8A, with a typical CMTI of ±150kV/μs and low propagation delay, suitable for isolated DC-DC and AC-DC server power supplies. The NSM201x series integrated Hall-effect current sensing ICs feature low conductor resistance, supporting isolated measurement over a wide current range from 2.5A to 200A, with current measurement accuracy of ±2%, isolation voltage up to 5000Vrms, and fast overcurrent protection, targeting applications including UPS and industrial server power supplies.
During the exhibition, NOVOSENSE subject matter experts will host three in-depth technical seminars at the PCIM conference, introducing semiconductor technologies related to high-voltage e-mobility and AI data center power systems. Additionally, the company will exhibit for the first time at the concurrently held SENSOR+TEST 2026, showcasing its magnetic, current, pressure, temperature, and humidity sensing technologies.
In 2025, NOVOSENSE achieved revenue of approximately $495 million, with the automotive business contributing over 35%; in the first quarter of 2026, revenue was approximately $168 million, a year-over-year increase of nearly 60%. According to market analysis firm Yole Group, NOVOSENSE ranks among the top five global magnetic sensor suppliers.
PCIM is a major international exhibition and conference covering power electronics, intelligent motion, renewable energy, and energy management. Since its inception in 1979, it has showcased the complete value chain from components, drive control, and packaging to final intelligent system solutions. SENSOR+TEST is the world's leading forum for sensor, measurement, and testing technology. Welcome to the NOVOSENSE booth at PCIM 2026 (Hall 4A, Booth 119) and the SENSOR+TEST 2026 booth (Hall 1, Booth 534).
This article is compiled by Wedoany. All AI citations must indicate the source as "Wedoany". If there is any infringement or other issues, please notify us promptly, and we will modify or delete it accordingly. Email: news@wedoany.com
