Switzerland's Subax Uses Amphibious Equipment to Implement Lakeshore Erosion Control Project
en.Wedoany.com Reported - On November 13, Swiss dredging contractor Subax was carrying out a shoreline restoration project in the Grande Cariçaie nature reserve on Lake Neuchâtel, using amphibious dredging equipment to extract approximately 14,000 cubic meters of sand from the lakebed to backfill about 1 kilometer of eroded shoreline. The project has a total investment of approximately 900,000 Swiss francs, jointly funded by the Canton of Vaud, the Canton of Fribourg and the Swiss Confederation. Upon completion, the shoreline's protective function will be restored through gently sloping beaches and reed planting.

The project is located in the Crevel section of the Grande Cariçaie nature reserve, with the construction area situated between Yvonand in the Canton of Vaud and Cheyres in the Canton of Fribourg. This area has long been scoured by lake waves and currents, with some shoreline retreating by about 1 meter per year. The erosion affects wetland ecosystems, lakeside archaeological sites, as well as coastal trails and residential buildings. Of the reserve's approximately 40 kilometers of shoreline, 11 kilometers are affected by erosion to varying degrees.
The construction uses amphibious suction dredging equipment, with the sand extraction point set in the lake area approximately 300 meters from the shore, at a maximum excavation depth of about 5.4 meters. The equipment extracts sedimentary sand from the lakebed through a suction device and delivers the sand-water mixture directly to the shore via a transport pipeline at a rate of approximately 50 to 70 cubic meters per hour. After the sand reaches the shore, another piece of equipment spreads and levels it to form a gently sloping beach approximately 30 meters wide.
Unlike traditional hard coastal protection methods, this project uses naturally deposited lakebed sand to restore the original shoreline topography. By redistributing sand that has been carried away from the shore by currents, the project creates a gentle slope that gradually descends from the shore toward the lake surface, allowing waves to gradually dissipate energy before reaching the wetland edge, thereby reducing direct scouring of the shore. The project had previously considered installing pile-type protective structures in the lake, but given construction costs and impacts on the natural landscape, the sand backfill option was ultimately chosen.
After shoreline reshaping is completed, the project plans to plant reeds in early 2027 to restore the original lakeside vegetation. Reed roots can stabilize sediments in shallow water areas and provide habitat for wetland animals. The area is home to approximately 800 plant species and 10,000 animal species. Shoreline erosion not only threatens wetland habitats but may also affect the prehistoric lakeside settlement archaeological sites inscribed on the UNESCO World Heritage List.
Protection research for the project began in 2023. The first phase of construction has been underway for approximately two months, and the on-site remediation results have been recognized by the project management. Construction results show that the backfilled sand can re-form a continuous shore beach, and some areas previously covered by water have been restored to sandy beach topography.
The management authority of the Grande Cariçaie nature reserve plans to extend this restoration method to other eroded shoreline sections, with the long-term goal of gradually treating approximately 11 kilometers of problematic shoreline. According to preliminary plans, if approximately 1 kilometer is restored each year or every two years, the entire priority area could be treated in phases within approximately 20 years.
Related Products

Aoxuan Intelligent Precision Air Conditioning Unit
SHANGHAI AOXUAN PURIFICATION TECHNOLOGY CO., LTD.







CITIC Heavy Industries Tunneling Equipment Tunnel Engineering Shield Machine
CITIC Heavy Industries Co., Ltd.
Acoustic Mineral Fiber Ceiling Tile 595x595x12mm
Shanxi Pano Trading Co., Ltd

YZR (450-560) Series Wound Rotor Three-Phase Asynchronous Motors for Crane and Metallurgical Applications
Jiamusi Electric Machine Co., Ltd.








