DDW22/08SE-HORIZONTAL DIRECTIONAL DRILL

Negotiable
China
No.6, Huoxing Fifth Street, Huo County Development Area, Tongzhou District, Beijing, China
+86 158 0128 6508
Online Contact
Favorite
Product Introduction

Features

  • Closed circuit hydraulic for rotation and thrust, with dual motor rotation for a stable and safe drill work.
  • Drilling data packed all-in-one showing in the coloured screen so the operator can have a full idea of his work.
  • Automatic pump of gear shifting covered by hood works in a smart way for a economical and environmental drill.
  • Seat switch and Strike alert system, auto speed and stop of carriage travelling makes it a total safe smart work unit.
  • DRILL HEAD: The most powerful rotation and thrust system gives the machine fast drill without any stop at the front of hard ground challenge.
  • REMOTE: Remote control box for a safety travelling of machine during the job site for a more degree of safe for the operator.
  • FLUID PUMP: Drilling fluid pump of gear shifting covered by hood works in a smart way for a economical and environmental drill.
  • SERVICE: Broad opening of the engine and hydraulic system for a most easy service and check up during the operation of any tough jobs by the operator.
  • OPERATOR CABIN: Fully enclosed cab offers premium operator comfort and complete climate control.
  • ENGINE: Diesel engine power pack provide long lasting and consistent power for carriage and rotation at any difficult drill time.
Product Parameters
Dimensions/ Weight
Length/Width/Height 6400*2210*2420 mm
Entry angle 13-19°
Total weight 9 ton
Operator station
Cabin Full closed, climate control with A/C
Rotational console 0-90°
Control system Electronic & hyd
Operation controls Joystick 2
Engine
Make Cummins
Rated power 110 KW
Rated speed 2300 rpm
Fuel tank capacity 160 L
Hydraulic system
Max pressure (rotary & carriage) 40 Mpa
Max pressure (control sys.) 20 Mpa
Hydraulic tank capacity 400 L
Under carriage
Structure Box welded frame,
Travel Self-propelled on track crawler
Travel speed 0-2.7 km/h, forward & reverse
Track Steel type with rubber pad
Track width 320 mm
Rear stabilizer 2
Drill mast
Transmission type Rack & pinion
Hose carrier Full length of chain type
Setup mode Double cylinder
Rotary drive
Rotary torque 7000/4500/2500 N.M
Rotary speed 95/125/188 r/min
Transmission Gear box
Carriage
Maximum thrust/pullback force 200 KN
Max travel speed 24 m/min
Max travel distance 3.5 m
Wrench assembly
Type Clamp jaw
Max breakout torque 15000 Nm
Max makeup force 150 KN
Thread greasing Automatic
Stake down
Anchoring type Hydraulic double anchors
Hole nos. 2
Pipe loader
Type Automatic pipe feeding
Rod box capacity 48
Mud pump
Type On board
Volume 300 L/min
Maximum pressure 8 Mpa
Gear shift Automatic
Drill pipe
Type Φ 60*3048 mm
Thread D24
Tools
Back reamer Diameter 330, 430, 530, 630, 730, 820, 920, 1050 mm

※ Specifications for reference only subject to change prior to notice. ※