VXZ Intelligent Natural Gas Inner Cone Flowmeter

Negotiable
China
No. 32 Xinsheng East Road, Desheng Industrial Park, Helan County, Yinchuan City, Ningxia Hui Autonomous Region
0951-6146659
Online Contact
Favorite
Product Introduction

The VXZ intelligent natural gas inner cone flowmeter is a new type of intelligent gas flowmeter integrating high-precision differential pressure transmitter, pressure transmitter, temperature sensor, intelligent totalizer, and inner cone, specially designed for natural gas and compressed air flow measurement.

Main Features

  • a) Self-rectifying function, no need for very long straight pipe sections: upstream ≤3D, downstream ≤1D.
  • b) Reynolds number range: 8×10³ ~ 1×10⁷, upper limit can be higher, lower limit can be lower.
  • c) Wide turndown ratio of 10:1, can be higher.
  • d) Dirt-resistant, self-cleaning, no wear, good stability, repeatability 0.1%.
  • e) Uses new microprocessor and high-performance integrated chip, high computation accuracy, powerful overall functions, superior performance.
  • f) With segmented flow coefficient correction function.
  • g) With 4~20mA current output and pulse signal output.
  • h) Uses RS-485 or RS-232 interface for networking with host computer. Can include GPRS wireless data transmission function.
  • i) Totalizer circuit board has lightning protection function.
  • j) Uses 128×63 graphic dot-matrix LCD to display cumulative flow (standard conditions), instantaneous flow (standard conditions), natural gas compressibility factor, density, pressure, differential pressure, temperature, current time and last power-down time, daily/monthly/annual report query.
  • k) Automatic recovery function: In addition to software watchdog, hardware system also has watchdog. Power-on/off reset system ensures forced recovery of instrument operation in case of program error or unexpected crash.
  • l) Power-down protection function: Instrument computation and user-set data will not be lost during power failure, saved for more than ten years.
  • m) Automatic power switching function: This instrument also supports UPS power connection. When normal external power is available, UPS is in charging state; when external power suddenly fails, the instrument automatically switches to UPS power.
  • n) This series of products adopts explosion-proof design, certified by the National Explosion-proof Safety Supervision and Inspection Station for Instrumentation (NEPSI), complies with national standards GB3836.1-2000, GB3836.2-2000, GB3836.3-2000, explosion-proof mark Exde II BT4, explosion-proof certificate No. GYB071045.

 

Main Technical Parameters

1 System uncertainty ±1.5%.

Includes temperature, pressure, differential pressure, supercompressibility factor, true relative density, flow totalizer section, inner cone throttling element section. Among them:

  • a Pressure indication error: ±0.2% FS
  • b Temperature indication error: ±0.1°C
  • c Differential pressure indication error: ±0.2% FS
  • d Flow totalizer accuracy: ±0.5% FS
  • e Inner cone throttling element: ±0.5% FS

2 Standard condition

P=101.325KPa t=20°C

3 Operating conditions:

  • a Ambient temperature: -20°C ~ 60°C
  • b Medium temperature: -20°C ~ 135°C
  • c Relative humidity: 5%~95%
  • d Atmospheric pressure: 75KPa~106KPa

4 Electrical performance indicators

Operating power: +24VDC ±15% ripple ≤ ±5%

Overall power consumption: <1W

Output methods

  • a. Uses RS485, RS232 interface, can directly network with host computer or secondary instrument, remotely display measured two-phase flow medium temperature, pressure, differential pressure, standard instantaneous flow, standard cumulative flow, holdup ratio, daily/monthly/annual reports, power-down records, and various set parameters.
  • b. 4~20mA current signal output, corresponding to zero flow and maximum flow.
  • c. Has frequency signal output proportional to standard volume flow, 0~1000HZ corresponding to minimum flow and maximum flow.
  • d. Has calibration pulse output: one pulse output for every certain unit of standard volume metered by the flowmeter. (Note: Frequency signal and calibration pulse output signal can only be selected as one by software setting)

5 Real-time data storage function

For user data management needs, the flowmeter can store real-time data detected and calculated by the totalizer in real time.

6 Wireless data transmission function

The flowmeter can transmit real-time data to the host computer via GPRS system in SMS form, enabling automated production management.

7 Explosion-proof mark "Exde II BT4"

8 Protection rating: IP65