The V-Cone flowmeter is a new type of differential pressure flow measurement device that uses a coaxial sharp cone installed inside the measuring pipe as the throttling element. It is a novel throttling device based on the Venturi tube measurement principle, integrating the advantages of the classic Venturi tube, annular orifice plate, and wear-resistant orifice plate.
Features
- 1. Short upstream and downstream straight pipe requirements: Minimum upstream straight pipe length is 3D (3D required when installed downstream of a valve), minimum downstream straight pipe length ≤3D.
- 2. Accuracy: ±0.5%; repeatability 0.1%; turndown ratio up to 15:1.
- 3. Dirt-resistant, low pressure loss.
- 4. Has flow conditioning and fluid mixing functions.
- 5. Easy installation - ideal flowmeter for technical retrofits
- 6. Maintenance-free or minimal maintenance work. Main technical parameters Nominal diameter (mm): DN25~DN2600 Nominal pressure
Main Technical Parameters
| Nominal Diameter (mm) | DN25~DN2600 |
| Nominal Pressure (MPa) | 0.25~42 |
| Accuracy | ±0.5% |
