High-Temperature Methanol to Hydrogen Catalyst SCST-403 High Conversion Rate, Few Side Reactions, High Strength

EXW
$162.43-191.96 /KG
China
Economic Development Zone, Daying County, Suining City, Sichuan Province, 629300
0825-7880085
Online Contact
Favorite
Product Introduction

High-Temperature Methanol to Hydrogen Catalyst SCST-403 High Conversion Rate, Few Side Reactions, High Strength

 

  • Application

SCST-403 high-temperature methanol to hydrogen catalyst is mainly used for the reforming and shift reaction of methanol and water under high temperature conditions of 300°C and above. Methanol and steam react through the catalyst bed to generate H2, CO2, a small amount of CO and CH4, to produce the required hydrogen. This catalyst is the latest research achievement of Sichuan Shutai Chemical Technology Co., Ltd., mainly suitable for the methanol to hydrogen process in methanol fuel cell systems, methanol combustion boilers and methanol to hydrogen systems.

The main reactions are as follows:

CH3OH+H2O=CO2+3H2   +49.5 kJ/mol

CH3OH=CO+2H2   +90.7 kJ/mol

CO+H2O=CO2+H2   +41.19 kJ/mol

CO+3H2=CH4+H2O   -206.3 kJ/mol

2CH3OH =CH3OCH3+H2O   -24.9 kJ/mol

 

II. Product Technical Specifications

Main Physicochemical Properties

Model

SCST-403

 

Appearance

Light yellow spheres

 

Specification

Φ3~4mm

Φ4~6mm

Main Operating Conditions

Operating Liquid Space Velocity

≤3.0h-1

Pressure

≤3 Mpa

Operating Temperature

300-600℃

(Determine the appropriate operating temperature according to pressure)

Poison Content in Feed Gas

Total sulfur ≤0.1mg/L, chlorine content ≤0.1mg/L

Catalysts of other sizes or shapes can also be provided according to user requirements.

 

III. Application Fields

Methanol direct cracking to hydrogen and carbon monoxide units.

 

  • Catalyst Characteristics

High single-pass conversion rate;

Few side reactions, low content of methane and carbon monoxide in the outlet gas;

High strength, good water resistance, not easy to pulverize, low operating resistance;

No activation required, can be put into liquid use after heating to the operating temperature.

 

  • Packaging, Storage and Transportation

The finished catalyst is packed in plastic drums or iron drums lined with plastic bags. During transportation and storage, it must be protected from moisture, fire, inverted placement and strictly prohibited from chemical contamination. Rolling or impact is strictly prohibited during handling; when stored outdoors, place sleepers at the bottom and cover with canvas for rain protection; it can also be packed in ton bags according to user requirements.