All 12 Main Girders of the New Bridge at the Mount Barker Interchange in South Australia, Australia, Have Been Erected
en.Wedoany.com Reported - On November 15, the Mount Barker Interchange upgrade project in South Australia, Australia, completed the erection of all 12 precast main girders for the newly built bridge spanning the South Eastern Freeway. The new bridge is 80 meters long and 14 meters wide, and uses 12 super-large precast concrete main girders, each 38 meters long and weighing 84 tonnes. Once completed, it will provide 3 northbound motor vehicle lanes and 1 roadside bicycle lane. The project is part of the upgrade works for the two freeway interchanges at Mount Barker and Verdun, with a total investment of AUD 150 million (approximately RMB 674 million).

The new bridge is located west of the existing bridge. All 12 Super-T precast main girders were manufactured by South Australian company Bianco Precast and transported to the construction site by specialized transport vehicles under police escort. Construction workers poured 6-meter-deep concrete pile foundations at the north and south ends of the bridge to support the abutment structures. During the girder erection process, large cranes were deployed at both ends to position the components.
After the new bridge is put into service, the existing bridge will be converted into 3 southbound motor vehicle lanes, forming a dual six-lane traffic layout together with the new bridge. The interchange will also undergo ramp capacity upgrades, with the addition of traffic signals and lighting facilities, and improved cycling conditions.
The Verdun Interchange project, implemented concurrently, will complete the eastbound and westbound freeway on- and off-ramps. The project includes a new eastbound on-ramp to Mount Barker and a westbound off-ramp. The new off-ramp will pass beneath the existing westbound on-ramp and connect to a new roundabout at the intersection of Mount Barker Road and Silver Road. A bridge approximately 13 meters long and 7 meters wide will also be built at this location, supported by 29 concrete piles and 12 precast bridge planks, with each plank weighing more than 13 tonnes.
The two interchange projects are jointly funded by the Australian Federal Government and the South Australian State Government, with the Federal Government contributing AUD 120 million and the South Australian State Government contributing AUD 30 million. The Mount Barker Interchange project is being constructed by Bardavcol, and the Verdun Interchange project is being implemented by a joint venture comprising BMD and Leed.
Related Products


Metal sound barriers that can reduce the transmission of road noise
Hebei Jinbiao Construction Materials Tech Corp., Ltd.


RISITA explosion-proof air conditioning
Guangdong RISITA Air Conditioning Equipment Co.,Ltd.
Pure Polyurethane Wall Panel BD-AEF-PIR-01
Baodu International Engineering Technology Co., Ltd.
Bidirectional Metal Hard Sealed Seawater Butterfly Valve
Henan Quanshun Flow Control Science & Technology Co., Ltd.


West China Xiamen Hospital of Sichuan University
Wuhan Huakang Century Clean Technology Co., Ltd.










