en.Wedoany.com Reported - At the 2025 Chongqing Lijia International Industrial Expo, Xinje showcased multiple series of military-grade controllers and several industry-level solutions, drawing significant attention.
The military-grade controllers exhibited this time feature 100% self-developed core technologies, with full-chain autonomous controllability. They have passed authoritative certification from the Fifth Electronics Research Institute and military-grade reliability verification. Xinje stated that autonomous controllability is an inevitable choice for the high-quality development of the industrial control industry.
Addressing the core needs of small-scale automation in military applications, Xinje presented the GS series programmable controllers.
This series is fully autonomously controllable and adapted for harsh environments. The products comply with the IEC61131 programming environment, adopt a blade-type design, and are over 60% smaller in volume compared to traditional PLCs.
For the military requirements of large and medium-sized critical scenarios, the expo introduced the GSZ series metal programmable controllers. These products feature a metal housing that effectively isolates external interference, enhances vibration resistance, and adapts to harsh environments.
Also on display were unmanned system controllers, serving as the core execution layer of unmanned vessel control systems, responsible for receiving motion commands such as speed and heading from the upper computer.
Addressing the manufacturing needs of the Southwest region, Xinje demonstrated multiple industry solutions. The multi-loop temperature collaborative control solution employs a multi-loop collaborative control algorithm combined with two-degree-of-freedom PID, enabling synchronous and asynchronous heating while suppressing overshoot. The high-precision acquisition module uses a 24-bit Σ-Δ ADC chip, achieving a resolution of 0.01°C and an accuracy of ±0.1% FS.
The all-in-one servo press-fit solution supports 64-step programming, is compatible with IO/Modbus communication, and provides comprehensive data functions. It offers a positioning accuracy of 0.01mm, a pressure accuracy of 5‰ FS, can build pressure to over 1000kgf within 1 second, with an acquisition frequency of 5kHz and a curve acquisition frequency of 200Hz.
The linear transmission platform solution achieves a maximum speed of 5m/s, an acceleration of 10G, a repeat positioning accuracy of ±1μm, an absolute positioning accuracy of ±3μm, and a stroke range covering 0.01 to 30m. It supports flexible production with multiple movers and can save 30% energy in equivalent motion scenarios.
The screw fastening robot solution offers a torque repeatability accuracy of ±3% and can be configured with 8 groups (1 stage of thread finding + 3 stages of fastening) of processes. The minimum curve sampling interval is 0.5°, and it comes with built-in defect detection, full-process data monitoring, and one-key encoder origin calibration. It can also interface with MES systems for data exchange.
The checkweighing and sorting equipment solution achieves a dynamic weighing accuracy of ±0.1g, an efficiency of 300 pieces per minute, and a sampling frequency of 480Hz. It supports parameter self-tuning and four weighing modes, and can record and export inspection data.
This article is compiled by Wedoany. All AI citations must indicate the source as "Wedoany". If there is any infringement or other issues, please notify us promptly, and we will modify or delete it accordingly. Email: news@wedoany.com
