en.Wedoany.com Reported - Case Construction Equipment has upgraded the cab and added multiple operator assistance features to its G-Series large wheel loaders, covering eight models from the 142-hp 521G to the 345-hp 1121G, aimed at improving operator comfort and operational efficiency.
All G-Series models now come standard with Auto Dig, Auto Dump, and Auto Meter functions. Auto Dig detects the material pile and controls the transmission and attachments to ensure a full bucket and reduce cycle times; Auto Dump synchronizes bucket tilt and shake to clear material, then automatically returns the bucket to a level position; Auto Meter controls the material unloading and spreading process for even distribution and reduced waste. Rear Object Detection provides audible and visual warnings when hazards are detected, enhancing situational awareness in confined or low-light areas. The optional Integrated Payload System allows operators to set target loads and monitor progress, with detailed reports available through the Case SiteWatch telematics system.
Cab upgrades include a redesigned HVAC system, electro-hydraulic (EH) controls, heated and ventilated seats, a seat belt indicator (with optional alarm), improved Bluetooth connectivity, and a noise-canceling microphone. An 8-inch touchscreen provides access to operating data, rearview camera, rear object detection system, and control functions including lift and tilt response levels, engine speed lock, and Automatic Ride Control (down to 1 mph). Color-coded configurable armrest buttons support one-touch access to key functions.
Two power modes are available: Max Power for heavy lifting and Smart Power for smooth shifting, reduced tire wear, and improved fuel efficiency. Hydrostatic braking helps extend brake life and reduce axle and tire wear. The 1021G and 1121G models offer an optional hydrostatic continuously variable transmission (CVT), with the X-Drive transmission reportedly improving fuel efficiency by up to 20% compared to standard transmissions, providing smooth acceleration for maximum traction and better control on slopes and when unloading near trucks. The 821G and 921G feature heavier counterweights, increasing operating weight by over 2,300 lbs to enhance lifting capacity.
The Case G-Series wheel loaders will be available later this year, with standard four-corner strobe light systems featuring customizable flash patterns and five color options. All major routine maintenance points, including HVAC filters and components, are accessible from ground level, and all models except the 521G feature power-open and power-close rear hoods.
Case 521G Wheel Loader Specifications: Horsepower 142 hp, Operating Weight 24,203 lb, Full Turn Tipping Load 16,159 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 2–2.5 cu yd, Maximum Travel Speed 22.3 mph, Hinge Pin Height (Z-bar) 142 in.
Case 621G Wheel Loader Specifications: Horsepower 172 hp, Operating Weight 28,159 lb, Full Turn Tipping Load 19,266 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 2.5–3 cu yd, Maximum Travel Speed 24 mph, Hinge Pin Height (Z-bar) 150.9 in.
Case 651G Wheel Loader Specifications: Horsepower 172 hp, Operating Weight 30,890 lb, Full Turn Tipping Load 20,942 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 3–3.5 cu yd, Maximum Travel Speed 24 mph, Hinge Pin Height (Z-bar) 155 in.
Case 721G Wheel Loader Specifications: Horsepower 195 hp, Operating Weight 36,011 lb, Full Turn Tipping Load 24,381 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 3–3.5 cu yd, Maximum Travel Speed 23.5 mph, Hinge Pin Height (Z-bar) 160.5 in.
Case 821G Wheel Loader Specifications: Horsepower 230 hp, Operating Weight 42,414 lb, Full Turn Tipping Load 24,913 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 4–4.5–4.75 cu yd, Maximum Travel Speed 22.8 mph, Hinge Pin Height (Z-bar) 162.1 in.
Case 921G Wheel Loader Specifications: Horsepower 255 hp, Operating Weight 45,070 lb, Full Turn Tipping Load 28,492 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 4–4.75 cu yd, Maximum Travel Speed 22.4 mph, Hinge Pin Height (Z-bar) 165.4 in.
Case 1021G Wheel Loader Specifications: Horsepower 318 hp, Operating Weight 56,365 lb, Full Turn Tipping Load 35,717 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 5.5 cu yd, Maximum Travel Speed 22 mph, Hinge Pin Height (Z-bar) 167.2 in.
Case 1121G Wheel Loader Specifications: Horsepower 345 hp, Operating Weight 61,650 lb, Full Turn Tipping Load 38,454 lb, Pin-on Bucket Capacity (GP, Bolt-on Edge) 6.25 cu yd, Maximum Travel Speed 23.2 mph, Hinge Pin Height (Z-bar) 175.2 in.
This article is compiled by Wedoany. All AI citations must indicate the source as "Wedoany". If there is any infringement or other issues, please notify us promptly, and we will modify or delete it accordingly. Email: news@wedoany.com
