en.Wedoany.com Reported - At the full-scenario distribution area energy storage solution launch event held on June 3, Kunyu Power Supply unveiled an energy storage product matrix covering the power, industrial and commercial, data center, communication, and residential sectors.
In the power energy storage field, Kunyu Power Supply released the liquid-cooled DC-side EnerGalactic-6261 system and the 835kWh liquid-cooled energy storage cabinet. The former adopts precise full-cabin temperature difference control and a highly integrated modular design, paired with battery cells featuring over 8,000 cycle life, to reduce the levelized cost of energy. The latter employs an innovative AC/DC integrated architecture, with a single-cabinet footprint of 4.4 square meters, effectively eliminating circulation losses and increasing discharge capacity by 8%, making it suitable for large-scale grid frequency regulation and distribution area scenarios.
In the industrial and commercial energy storage field, targeting high-cold regions, high-electricity-price industrial parks, and zero-carbon industrial parks, Kunyu Power Supply launched the PowerEco-100kW/200kWh-Na sodium-ion commercial and industrial storage all-in-one machine. This product is equipped with polyanion sodium-ion battery cells, featuring a cycle life exceeding 8,000 cycles, excellent intrinsic safety, and standard full-scenario liquid-cooled temperature control, reducing energy consumption by 40% compared to air-cooled solutions. Also showcased was the PowerEco-60kW/120kWh air-cooled AC/DC all-in-one machine, with a footprint of less than 2.65 square meters, supporting photovoltaic integration and multi-unit parallel operation, enabling two charges and two discharges through AI peak-valley strategies.
For AIDC scenarios, Kunyu Power Supply exhibited the data center immersion lithium/sodium battery solution CFS512120U and the containerized lithium battery system CFC512300U. The CFS512120U adopts full-immersion protection technology, achieving zero fire and zero explosion risks, with high-rate rapid backup power, and a narrow cabinet design compatible with mainstream UPS. The CFC512300U is an integrated containerized prefabricated system, ready for immediate use upon arrival, with high protection levels, supporting multi-cabinet parallel expansion, suitable for large data centers and semiconductor factories.
In the communication energy storage field, the new-generation communication energy storage system CLSS4810OT adopts a full-cell oil-immersion protection process, preventing fire even when punctured, operating stably within a temperature range of -40°C to 55°C, with a cycle life of 6,000 cycles, achieving maintenance-free operation throughout its entire lifecycle. This system is paired with smart BMS for millisecond-level monitoring, featuring anti-theft and black box data traceability functions, suitable for extreme scenarios such as remote mountainous areas, offshore islands, and underground spaces.
The launch event also showcased 50 to 720Ah lithium battery cells, 50 to 170Ah sodium battery cells, and lightweight residential energy storage all-in-one machines. The residential energy storage products are 30% smaller in volume compared to traditional models, supporting multilingual intelligent interaction.
At the launch event, Kunyu Power Supply emphasized its distribution area energy storage solutions. By the end of 2025, the National Development and Reform Commission and the National Energy Administration jointly issued a document, explicitly incorporating distribution area energy storage into the core category of grid-substitutive energy storage. Addressing pain points such as distribution network overload, poor voltage quality, three-phase imbalance, and new energy consumption, the company introduced a dual-route collaborative solution combining lithium iron phosphate and sodium-ion batteries. The lithium iron phosphate solution is safe, mature, and cost-competitive, while the sodium-ion battery operates within a temperature range of -40°C to 55°C, offering excellent low-temperature performance and abundant raw material sources. The products cover four major scenarios: distribution area overload management and dynamic capacity expansion, new energy consumption, emergency backup power supply, and remote distribution area microgrids, supporting front-side maintenance, quick replacement, and mixed use of old and new units, with six-dimensional sensing capabilities for temperature, humidity, pressure, smoke, combustible gas, and water immersion.
Case data shows that after deploying a 125kW/261kWh smart distribution area energy storage system at a project in Zhaoqing, Guangdong, the terminal voltage stabilized at 220V ±5%, reducing costs by over 70% compared to traditional line upgrades, with the project becoming operational within one month.
This article is compiled by Wedoany. All AI citations must indicate the source as "Wedoany". If there is any infringement or other issues, please notify us promptly, and we will modify or delete it accordingly. Email: news@wedoany.com
